Fisher & Paykel ADN20x30 - Manual
Fisher & Paykel ADN20x30 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – paper in the direction of the grain.; fresh water and stainless cleaner.
- Page 3 – PORtES D’ACCÈS ADN DCS BY FISHER & PAYKEL; SPÉCIFICAtIONS DES PORtES D’ACCÈS :; MODÈLES DE; INStRuCtIONS RELAtIVES À L’INStALLAtION; Vérifier que l’alignement est adéquat.
- Page 4 – légèrement avec du papier de verre 100, dans le sens du grain.; d’un nettoyant pour acier inoxydable.
DCS BY FISHER & PAYKEL ACCESS DOORS ADN
INStALLAtION INStRuCtIONS
ACCESS DOOR SPECIFICAtIONS:
MODEL: ADN20x30
MODEL: ADN20x24
SIDE VIEW
MODEL: ADN20x36
35-15/16”
30”
24”
MODEL: ADN20x48
47-15/16”
1-1/4”
4-1/4”
2”
21-7/8”
21-7/8”
5/16”
15/16”
2-1/8”
Anchor hole
(Ø 1/4”)
A
90º
B
Vent*
Vent*
Vent*
CutOut SPECIFICAtION
ACCESS DOOR
MODELS
A
(-0”, +1/8”)
B
(-0”, +1/8”)
ADN20x48
46"
20”
ADN20x36
34"
20”
ADN20x30
28"
20”
ADN20x24
22"
20”
INStALLAtION INStRuCtIONS
Slide frame into opening (see cutout dimensions in chart above).
1.
Check for proper alignment.
2.
Using the four slotted holes in the frame as a guide, pre drill four pilot holes on the left & right sides of
3.
your island. Secure the unit using screws and anchors suited for the type of cabinet material.
Install the access door and check for proper alignment of doors and frame.
4.
NOTE: The cutout of each corner should be 90° angle in order for the access doors to fit properly.
* Island installation to use minimum of 3 vents providing 10 sq. in. per vent (typical).
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
CARE & MAINtENANCE All parts of the Professional Access Doors can be cleaned with hot soapy water, rinsed, dried and buffed to a shine with a soft, heavy cloth. Always try this first, as it is the mildest cleaning procedure. Always rub in the direction of the grain. Use only clean sponges, soft ...
PORtES D’ACCÈS ADN DCS BY FISHER & PAYKEL INStRuCtIONS RELAtIVES À L’INStALLAtION SPÉCIFICAtIONS DES PORtES D’ACCÈS : SPÉCIFICAtION DE DÉCOuPE MODÈLES DE PORtES D’ACCÈS A (-0, +3,2mm [1/8 po]) B (-0, +3,2mm [1/8 po]) ADN20x48 116,8 cm (46 po) 50,8 cm (20 po) ADN20x36 86,3 cm (34 po) 50,8 cm (20 ...
Nettoyer toutes les pièces des portes d’accès professionnelles à l’eau chaude savonneuse, puis rincé, séché et bien poli à l’aide d’un gros chiffon doux. Essayez cela en premier; c’est la façon la plus douce de le nettoyer. Frottez toujours dans le sens du grain. Pour nettoyer ou récurer, utilisez u...
