Page 2 - Contents
i 1. Before You Start... 1 Personal Safety 1 Electrical Connection Safety 2 If You Smell Gas 2 Peculiar Smells 2 Cooling Fan 2 Ventilation 3Maintenance 3Grill/Glide-out Grill™ Care 5 Cooker Care 5 Cleaning 5 2. Cooker Overview 7 Hotplate Burners 7 Wok Burner 8 The Wok Cradle* 9 The Griddle* 9 The Gl...
Page 3 - Personal Safety
1 Your cooker should give you many years of trouble-free cooking if installed and operated correctly. It is important that you read this section before you start.This User Guide covers a number of different models. Although some of the illustrations will look different to your particular model the f...
Page 6 - Oven Care
4 FRONT Rear stop Front bracket ArtNo.324-0001 Steam burst • DO NOT modify this appliance. This appliance is not intended to be operated by means of external timer or separated remote-control system. • If flammable materials are stored in the drawer, oven(s) or grill(s) it may explode and result in ...
Page 9 - Hotplate Burners
7 The 90 dual fuel cooker ( Fig. 2.1 ) has the following features: A. 5 hotplate burners including a wok burner B. A control panel incorporating a timer C. A glide-out grill D. Main fan oven E. Tall fan oven Hotplate Burners The drawing by each of the central knobs indicates which burner that knob c...
Page 10 - Wok Burner
8 Art No. 311-0003 Simmer aids ArtNo.311-0004 Tipping wok ArtNo.311-0005 Wok burner & pan support ArtNo.311-0002 Pan with rim ArtNo.311-0001 Right pans gas Fig. 2.4 Fig. 2.5 Fig. 2.6 Fig. 2.7 Fig. 2.8 If, when you let go of the control knob, the burner goes out, then the FSD has not been bypasse...
Page 13 - The Ovens; Operating the Ovens
11 ArtNo.235-0004 - Classic DL oven 1 ArtNo.323-0002 Tall oven The Ovens The clock must be set to the time of day before the ovens will work. See the following section on ‘The Clock’ for instructions on setting the time of day.References to ‘left-hand’ and ‘right-hand’ ovens apply as viewed from the...
Page 14 - To stop the oven at a specific time of day; OR; REMEMBER
12 1 2 1 3 1 2 1 1 1 1 1 1 Step. 1 Step. 1 Step. 2 Step. 2 Step. 3 Step. 4 1 2 3 Check how much time you have left Cancel the timer alarm 3. Rotary clock To stop the oven at a specific time of day (main oven only) You have set the required temperature and function mode and you would like the oven to...
Page 15 - Beeper tone adjustment
13 1 1 2 1 1 Check how much time you have left Beeper tone adjustment 1 1 2 1 1 B 1 1 1 1 2 To start and stop the oven automatically (main oven only) The timer allows you to automatically start and stop by a combination of the length of the cooking time and the stop time. Giving you the flexibility ...
Page 16 - Minute Minder
14 ArtNo.306-0001 - 3-button clock ArtNo.306-0001 - 3-button clock ArtNo.306-0001 - 3-button clock ArtNo.306-0001 - 3-button clock ArtNo.306-0001 - 3-button clock ArtNo.306-0001 - 3-button clock Step. 1 Step. 1 Step. 2 Step. 3 Step. 1 Step. 2 ArtNo.306-0001 - 3-button clock ArtNo.306-0001 - 3-button...
Page 18 - Setting the time
ArtNo.302-0002 - 6BC annotated 16 5. 6 Button clock ArtNo.302-0002 - 6BC annotated ArtNo.302-0002 - 6BC annotated ArtNo.302-0002 - 6BC annotated ArtNo.302-0002 - 6BC annotated ArtNo.302-0002 - 6BC annotated A B C D E F A – Minute minder, B – ‘Cook’ time, C – ‘Stop’ time, D – Manual, E & F – Time...
Page 20 - Tips on cooking with the timer; General oven tips
18 Tips on cooking with the timer If you want to cook more than one dish, choose dishes that require approximately the same cooking time. However, dishes can be ‘slowed down’ slightly by using small containers and covering them with aluminium foil, or ‘speeded up’ slightly by cooking smaller quantit...
Page 22 - Essential Information; Cleaning your cooker
20 A B C D A – inner burner cap, B – outer burner cap, C – burner head, D – wok burner base ArtNo.311-0032 Burner layout FSD A B C D E A – cap, B – head, C – notch, D – base , E – electrode Essential Information Isolate the electricity supply before carrying out any thorough cleaning. Allow the cook...
Page 23 - The Griddle Plate; Control Panel and Doors
21 ArtNo.331-0001Grill pan pulled forwards ArtNo.331-0003 Grill frame out, no pan ArtNo.331-0004 Removing the grill frame ArtNo.331-0005 Removing the grill rail ArtNo.331-0006 Grill pan plan Fig. 8.5 Fig. 8.6 Fig. 8.7 Fig. 8.8 Fig. 8.9 The Griddle Plate Always clean the griddle plate after use. Allo...
Page 24 - Glass Fronted Door Panels; Ovens; Removing the Main Oven Linings
22 Glass Fronted Door Panels The oven door front panels can be taken off so that the glass panels can be cleaned. Move the cooker forward to gain access to the sides (see the ‘Moving the Cooker’ section under ‘Installation’).Open the oven door slightly and remove the front panel fixing screws from t...
Page 25 - Cleaning table
23 Cleaning table Cleaners listed are available from supermarkets or electrical retailers as stated. For enamelled surfaces use a cleaner that is approved for use on vitreous enamel.Regular cleaning is recommended. For easier cleaning, wipe up any spillages immediately. HotplatePart Finish Recommend...
Page 28 - If You Have a Problem; Service and Spares
INSTALLATION Check the appliance is electrically safe when you have finished. 26 Firstly, please complete the appliance details below and keep them safe for future reference – this information will enable us to accurately identify the particular appliance and help us to help you. Filling this in now...
Page 31 - Positioning the Cooker
INSTALLATION Check the appliance is electrically safe and gas sound when you have finished. 29 ArtNo.090-0025 - 90 classic (gas) door clearances 130 mm Positioning the Cooker The diagram ( Fig. 11.1 ) shows the minimum recommended distance from the cooker to nearby surfaces as given in AS/NZS 5601.W...
Page 33 - Levelling
INSTALLATION Check the appliance is electrically safe and gas sound when you have finished. 31 Alternative positions for stability location bracket ArtNo.070-0014 - Stability bracket - Wall fitting Cooker Stability bracket Floor Stability location bracket Wall Typical wall mounting ArtNo.070-0014 - ...
Page 34 - Fitting the Restraining Chain; Gas Connection
INSTALLATION Check the appliance is electrically safe and gas sound when you have finished. 32 470 350 675 A 315 All dimensions in millimetres Gas inlet Flexible hose Pipework Pipework Flexible hose Fitting the Restraining Chain The restraining chain MUST be fitted. The length of chain between the a...
Page 35 - Pressure Testing
INSTALLATION Check the appliance is electrically safe and gas sound when you have finished. 33 ArtNo.132-0001 - 1 phase 240Vac 50Hz 1-phase 230 V AC 50 Hz Current Operated Earth Leakage Breakers The combined use of your cooker and other domestic appliances may casue nuisance tripping, so we recommen...
Page 36 - Hotplate Check
INSTALLATION Check the appliance is electrically safe and gas sound when you have finished. 34 Fixed Wiring n Disconnect from the mains supply. For connection to fixed wiring, i.e. flexible conduit, remove the electrical terminal cover box on the back panel ( Fig. 11.14 ). Fit the conduit box to the...
Page 37 - Fitting the Handles and Handrail; Fitting the 1-piece Plinth; Customer Care
INSTALLATION Check the appliance is electrically safe and gas sound when you have finished. 35 ArtNo.350-0010 - Fitting the plinth 1 (Kitchener) ArtNo.215-0026 - Handle gaskets fixed Art No 215-0028 - Handrail fascia fixings Fig. 11.18 Fig. 11.19 Fig. 11.20 Fitting the Handles and Handrail Remove th...
Page 38 - Injectors; Conversion to LP Gas
WARNING – SERVICING TO BE CARRIED OUT ONLY BY AN AUTHORISED PERSON Disconnect from electricity and gas before servicing. Check appliance is safe when you have finished. 36 A B ArtNo.311-0010 Injectors A – Jet, B – Jet ArtNo.0102-0011 - Screwing the control valve bypass screw Art No 215-0028 - Handra...
Page 39 - Set the Governor; Affix Label
WARNING – SERVICING TO BE CARRIED OUT ONLY BY AN AUTHORISED PERSON Disconnect from electricity and gas before servicing. Check appliance is safe when you have finished. 37 Set the Governor Unscrew the governor’s brass top. In the base of the brass top is a plastic snap-in converter device ( Fig. 12....
Page 40 - Panels
WARNING – SERVICING TO BE CARRIED OUT ONLY BY AN AUTHORISED PERSON Disconnect from electricity before servicing. Check appliance is safe when you have finished. 38 Art No 215-0028 - Handrail fascia fixings 13. Servicing n BEFORE SERVICING ANY GAS CARRYING COMPONENTS TURN OFF THE GAS SUPPLY n Check t...
Page 41 - Hotplate
WARNING – SERVICING TO BE CARRIED OUT ONLY BY AN AUTHORISED PERSON Disconnect from electricity before servicing. Check appliance is safe when you have finished. 39 2 Hotplate n BEFORE SERVICING ANY GAS CARRYING COMPONENTS, TURN OFF THE GAS SUPPLY. 2.1 To Remove the Hotplate Pull the cooker forward t...
Page 44 - Doors
WARNING – SERVICING TO BE CARRIED OUT ONLY BY AN AUTHORISED PERSON Disconnect from electricity before servicing. Check appliance is safe when you have finished. 42 ArtNo.320-0002a Proplus oven door side screws ArtNo.320-0006 Oven door hinge adjustment 1 ArtNo.320-0007 Oven door hinge adjustment 2 6 ...
Page 46 - Circuit Diagram
44 14. Circuit Diagram P095199 2 P2 P1 1 P095199 2 P2 P1 1 a b e f c d 1 2 b v br b b b b r b b r b b br v bk bk v v br br b y y y y br b br b br b bk b g/y v y y or or g/y r r bk br br v bk v br b r b b v b b r r v y y b r b r b b br br br b b y br br b br v v y E X02 X17 X01 A X27 X31 X05 X26 X26 ...
Page 47 - Connection & Test Pressures; Dimensions; Ratings
45 15. Technical Data This cooker is designed for use on Natural gas, although a conversion for LP (LPG X Propane (2.54 kPa) gas is packed with the cooker. INSTALLER : Please leave these instructions with the User. DATA BADGE LOCATION : Cooker back, serial number repeater badge below oven door openi...
