Extron TLP 710TV - Manual

Extron TLP 710TV

Extron TLP 710TV – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.

1 Page 1
2 Page 2
3 Page 3
4 Page 4
Page: / 4

Table of Contents:

  • Page 2 – TLP 710MV and TLP 710TV • Setup Guide (Continued); Menu button; TLP 710MV Reset Buttons and LED; Extron; n n; MTP Signal Adjustments; ij
  • Page 3 – Product Category; Initial Configuration
  • Page 4 – Wall-Mounting or Furniture-Mounting the TLP 710MV; rear panel connectors; Reset Modes; TLP 710MV Reset Buttons; Screen Design and Configuration
Loading the manual

1

Product Category

IMPOR

TANT

:

Refer to www

.extron.com for

the complete TLP 710 Series

user guide befor

e connecting

the pr

oduct to the power sour

ce.

TLP 710MV and TLP 710TV • Setup Guide

Overview

The Extron TLP 710MV (wall-mounted) and TLP 710TV (desk-mounted) TouchLink

Panels provide simple and versatile

configuration and control for a range of IP Link

®

control systems. Graphic and text objects are displayed on the screen.

These objects have system control functions associated with them, and the touch overlay allows you to activate or regulate
those functions.
These touchpanels communicate through an Ethernet connection to a configurable IP Link control processor. Video and
audio input is provided by a twisted pair cable connected to an Extron MTP transmitter.

NOTE:

The network output must be connected to a network switch, hub, or router that is connected to an Ethernet
LAN or the Internet. An Extron IP Link controller must also be connected to the same network. Suggested
models include IPL T S series (for example, IPL T S4), IPL 250, IPL T CR48, IPL T SFI244, or IPCP 505.

Extron strongly recommends that power is provided by a Power over Ethernet (PoE) power supply.
This guide provides basic instructions for experienced installers to mount and perform initial configuration on the
TLP 710 series of touchpanels. Full instructions and reference material can be found in the

TLP 710MV and TLP 710TV User

Guide

, which is available on the Extron website (

www.extron.com

).

Front Panel Features

Extron TLP 710TV

Extron

a

b

c

d

e

f

Extron

Extron TLP 710MV

a
b

c

d

e

f

g

g

a

Motion Sensor

— when no motion has been detected for a user-defined period of time, the unit goes into sleep

mode. When motion is detected by the sensor, the screen display is restored and active.

b

Microphone

— is located below the LCD screen.

c

Speaker

— one, placed under the screen, on the left side of the panel, provides audible feedback for the user.

d

Programmable LEDs

— one on each top corner can be programmed to provide system feedback. They light red or

green and can blink or light steadily.

e

LCD screen

— has a 800x480 resolution with a touch overlay. Extron software is used to design and configure a graphic

user interface to display buttons, text, or icons, which have user-defined functions associated with them.

f

Connection status LED

— is unlit during normal operation. The LED blinks red if the connection to the IP Link

controller is lost.

g

Light Sensor

— (can be seen only from above the unit) monitors ambient light level and adjusts screen brightness.

"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.

Summary

Page 2 - TLP 710MV and TLP 710TV • Setup Guide (Continued); Menu button; TLP 710MV Reset Buttons and LED; Extron; n n; MTP Signal Adjustments; ij

2 TLP 710MV and TLP 710TV • Setup Guide (Continued) Use the Extron removal tool to separate the front bezel from the TLP 710MV. Insert the tool into one of the slots found on the bottom surface of the unit. h Menu button — activates the on-screen menus for calibrating the unit (see page 3). i Reset ...

Page 3 - Product Category; Initial Configuration

3 Product Category Initial Configuration Before use, configure the touchpanel, using the on-screen menus. 1. Press the Menu button once. (See “Menu button” under “ TLP 710MV Reset Buttons and LED “ for the TLP 710MV or “ Rear Panel Features “ for the TLP 710TV.) The Main menu screen opens (see figur...

Page 4 - Wall-Mounting or Furniture-Mounting the TLP 710MV; rear panel connectors; Reset Modes; TLP 710MV Reset Buttons; Screen Design and Configuration

4 68-2028-50 Rev. A 09 11 Extron USA - West Headquarters + 800.633.9876 Inside USA/Canada Only +1.714.491.1500+1.714.491.1517 FAX Extron USA - East +800.633.9876 Inside USA/Canada Only +1.919.863.1794+1.919.863.1797 FAX Extron Europe +800.3987.6673 Inside Europe Only +31.33.453.4040+31.33.453.4050 F...

Other Extron Models

All Extron Other