Extron SYSTEM 8/10 PLUS - Manual
Extron SYSTEM 8/10 PLUS – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – Extron • System 8/10 P; LUS; and also turn the projector’s power OFF.; as; Main Power LED should light. Apply power to the projector.; SW15 DIP Switch
- Page 3 – Hughes Installation
- Page 4 – Hughes/JVC Projector Configuration
- Page 5 – Use the illustration below when connecting the System 8/10 P
- Page 6 – to a; Hughes HJT 200 Projector
- Page 7 – Select Edit from the submenu and press Enter.
Extron • System 8/10 P
LUS
• User’s Manual • P/N 68-412-01 Rev. A
Hughes Installation
Configuration and Connections
SYSTEM 8/10 Plus
PROJECTOR COMMUNICATIONS KIT
ATTENTION!
PLEASE READ THIS DOCUMENT FOR IMPORTANT
INSTALLATION INSTRUCTIONS
THIS KIT HAS BEEN SHIPPED WITH THE FOLLOWING COMPONENTS:
Kit Type: HUGHES
Included Communications Adapter(s):
Quantity
Part Number
Description
1
26-467-01
ADP, UNV, “A”
THE TABLE BELOW LISTS THE POSSIBLE CONFIGURATION(S) AND CORRESPONDING
COMMUNICATIONS ADAPTER(S) FOR YOUR PROJECTOR MANUFACTURER’S VARIOUS
MODELS. PLEASE NOTE THAT YOUR SWITCHER HAS BEEN CONFIGURED AS
INDICATED BY THE “
✔
” IN THE “Config as” COLUMN. IF YOUR PROJECTOR MODEL
DIFFERS FROM THIS CONFIGURATION, YOU MUST RECONFIGURE YOUR SWITCHER
WITH THE CORRECT SETTINGS.
PLEASE REFER TO THE FOLLOWING PAGES FOR COMPLETE CONFIGURATION AND
SIGNAL CONNECTION INSTRUCTIONS.
THIS SWITCHER HAS BEEN CONFIGURED FOR:
HUGHES/JVC
Config
Model
Rotary Switches Cable
SW15 Settings
Comm
as
RS1 RS2 RS3 RS4 J2/J3 1 2 3 4 5 6 7 8 9 10 Adapter
✔
Hughes-JVC
0
0
6
5
J2
↓ ↓ ↑ ↓ ↑ ↓ ↓ ↓ ↑ ↓
26-467-01
Hughes DILA
0
0
F
8
J2
↓ ↓ ↑ ↓ ↑ ↓ ↓ ↓ ↑ ↓
26-467-01
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
Extron • System 8/10 P LUS • User’s Manual • P/N 68-412-01 Rev. A Hughes Installation Configuration and Connections Page 1 Hughes-JVC DILA Projector Configuration (RS-232) Verify that the System 8/10 Plus is already configured for the Hughes-JVC DILAG1000/G10 projector by following the procedure and...
Extron • System 8/10 P LUS • User’s Manual • P/N 68-412-01 Rev. A Hughes Installation Configuration and Connections Page 2 Page 2 System 8/10 Plus to Hughes-JVC DILA Projector Connections (RS-232) Use the illustration below as a guide when connecting the System 8/10 Plus tothe Hughes-JVC DILA projec...
Extron • System 8/10 P LUS • User’s Manual • P/N 68-412-01 Rev. A Hughes Installation Configuration and Connections Page 3 Hughes/JVC Projector Configuration Check to see if the System 8/10 P LUS is already configured for the Hughes/JVC projector. The general setup is explained on page 3-4 and the s...
