Extron System 4LD xi - Manual
Extron System 4LD xi – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
1-2
System 4LD
xi
xi
xi
xi
xi
• Specifications
Specifications — System 4LD
xi
xi
xi
xi
xi
Switcher
Video
Gain ............................................... Unity
Bandwidth .................................... 300 MHz (-3dB)
Crosstalk ....................................... -80dB @ 3.58 MHz
Switching speed ........................... 5 mS (max.)
Video input
Number/signal type ................... 4 universal inputs (RGBHV, RGBS, RGsB, RsGsBs, S-video, composite video)
Connectors .................................... 4 x 5 BNC female
Minimum/maximum levels ...... Analog ....... 0.3V to 2V p-p with no offset
Impedance .................................... 75 ohms (deselected inputs)
Horizontal frequency .................. 15 kHz to 150 kHz
Vertical frequency ....................... 30 Hz to 150 Hz
Return loss .................................... -30dB @ 5 MHz
Video output
Number/signal type ................... 1 RGBHV, RGBS, RGsB, line-doubled video
Connectors .................................... 5 BNC female
Minimum/maximum levels ...... 0.3V to 2.0V p-p
Impedance .................................... 75 ohms
Return loss .................................... -25dB @ 10 MHz
DC offset ....................................... ±5mV maximum with input at 0 offset
Switching type ............................. Triple Action, 0 S to 5 S, adjustable
Sync
Input type ..................................... RGBHV, RGBS, RGsB, RsGsBs
Output type .................................. RGBHV, RGBS, RGsB, RsGsBs
Standards ...................................... NTSC 3.58, NTSC 4.43, PAL, SECAM
Input level ..................................... 0.5V to 5V p-p
Output level .................................. 0.5V to 5V p-p
Input impedance .......................... 510 ohms (deselected inputs)
Output impedance ...................... 75 ohms
Max input voltage ....................... 5V p-p
Max. propagation delay .............. 5 nS
Max. rise/fall time ....................... 5 nS
Polarity .......................................... Positive or negative (follows input)
Audio
Frequency response ..................... 20 Hz to 20 kHz, ±0.05dB
THD + Noise ................................ 0.002% @ 1 kHz at rated maximum output drive
S/N ................................................ >95dB at rated maximum output drive
Crosstalk ....................................... <-85dB @ 20 Hz to 20 kHz, fully loaded
Stereo channel separation .......... >60dB @ 20 Hz to 20 kHz
CMRR ............................................ >60dB @ 20 Hz to 20 kHz
Audio input
Number/signal type ................... 4 stereo, balanced/unbalanced
Connectors .................................... 4 5 mm captive screw connectors, 6 pole
Impedance .................................... >10 kohms unbalanced, >20 kohms balanced, AC coupled
Maximum level ............................ +11.2dBu, (balanced or unbalanced) at stated %THD+N
Input gain adjustment ................. –95.5dB to +31.5dB, adjustable per input
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
