Extron SW8/12 - Manual
Extron SW8/12 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Specifications — SW8/12 VGA Ars
1
Extron SW8/12 VGA Ars Switchers • Specifications
Video
Gain ................................................. Unity
Bandwidth ...................................... 350 MHz (-3 dB)
Crosstalk ......................................... -68 dB @ 10 MHz
Video input
Number/signal type ..................... 8 or 12 (depending on the model) VGA-QXGA RGBHV, RGBS, RGsB,
RsGsBs computer video, and HDTV component video
Connectors ..................................... 8 or 12 (depending on the model) female 15-pin HD
Nominal level ................................ 1.0 Vp-p for Y of component video
0.7 Vp-p for RGB and for R-Y and B-Y of component video
Minimum/maximum levels ........ Analog: 0.3 V to 1.5 Vp-p with no offset
Impedance ...................................... 75 ohms
Horizontal frequency .................... 15 kHz to 145 kHz
Vertical frequency .......................... 30 Hz to 170 Hz
Return loss ...................................... -40 dB @ 5 MHz
Input coupling ............................... DC
Video output
Number/signal type ..................... 2 VGA-QXGA RGBHV, RGBS, RGsB, RsGsBs computer video, and HDTV
component video (follows input type)
Connectors ..................................... (
2
) female 15-pin HD
Nominal level ................................ 1.0 Vp-p for Y of component video
0.7 Vp-p for RGB and for R-Y and B-Y of component video
Minimum/maximum levels ........ 0.3 V to 1.5 Vp-p (follows input)
Impedance ...................................... 75 ohms
Return loss ...................................... -43 dB @ 5 MHz
DC offset ......................................... ±5 mV with input at 0 offset
Sync
Input type ....................................... RGBHV, RGBS, RGsB, RsGsBs, bi-level and tri-level sync
Output type .................................... RGBHV, RGBS, RGsB, RsGsBs, bi-level and tri-level sync (follows input)
Input level ...................................... 1.0 V to 5.0 Vp-p
Output level ................................... TTL: 5.0 Vp-p, unterminated
Input impedance ........................... 510 ohms
Output impedance ........................ 75 ohms
Max. propagation delay ............... 54 ns
Max. rise/fall time ........................ 4.7 ns
Polarity............................................ Positive or negative (follows input)
Audio
Gain ................................................. Unbalanced output: +0 dB; balanced output: +6 dB
Frequency response ...................... 20 Hz to 20 kHz, ±0.05 dB
THD + Noise .................................. 0.01% @ 1 kHz at nominal level
S/N .................................................. >90 dB at maximum output (unweighted)
Crosstalk ......................................... -45 dB @ 1 kHz, fully loaded
Stereo channel separation ............ >80 dB 1 kHz
Audio input
Number/signal type ..................... 8 or 12 (depending on the model) stereo, unbalanced
Connectors ..................................... 8 or 12 (depending on the model) 3.5 mm female stereo mini jacks; tip (L),
ring (R), sleeve (Gnd)
Impedance ...................................... >10k ohms unbalanced, DC coupled
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
