Extron SW2 VGA DA2 A - Manual
Extron SW2 VGA DA2 A – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Specifications — SW2 VGA DA2 A/AF/AF R
Video
Gain ............................................... Unity
Bandwidth .................................... 300 MHz (-3 dB)
Video input
Number/signal type ................... 2 VGA-UXGA RGBHV, RGBS, RGsB*, RsGsBs*, HDTV component video*
Connectors .................................... 2 VGA female 15-pin HD
Nominal level ............................... 1.0 Vp-p for Y of component video
0.7 Vp-p for RGB and for R-Y and B-Y of component video
Minimum/maximum levels ...... Analog: 0.3 V to 1.5 Vp-p with no offset
Impedance .................................... 75 ohms
Horizontal frequency .................. 15 kHz to 145 kHz
Vertical frequency ....................... 30 Hz to 170 Hz
Video output
Number/signal type ................... 2 buffered VGA-UXGA RGBHV, RGBS, RGsB*, RsGsBs*, HDTV component video*
Connectors .................................... 2 VGA 15-pin HD female
Nominal level ............................... 1.0 Vp-p for Y of component video
0.7 Vp-p for RGB and for R-Y and B-Y of component video
Minimum/maximum levels ...... 0.4 V to 1.8 Vp-p (follows input)
Impedance .................................... 75 ohms
*RGsB, RsGsBs, and HDTV component video inputs and outputs work in manual mode only.
Autoswitching requires TTL level sync on pin 13 of the 15-pin HD connector.
Sync
Input type ..................................... RGBHV, RGBS, RGsB*, RsGsBs*, bi-level and tri-level sync
Output type .................................. RGBHV, RGBS, RGsB*, RsGsBs*, bi-level and tri-level sync
Input level ..................................... 1.7 V to 5.0 Vp-p
Output level .................................. TTL: 5.0 Vp-p, unterminated
Input impedance .......................... 510 ohms
Output impedance ...................... 50 ohms
Max. input voltage ...................... 5.0 Vp-p
Max. rise/fall time ....................... 40 ns
Polarity .......................................... Positive or negative (follows input)
Audio
Gain ............................................... Unbalanced output: 0 dB; balanced output: +6 dB
Frequency response ..................... 20 Hz to 20 kHz, ±0.05 dB
THD + Noise ................................ 0.03% @ 1 kHz at nominal level
S/N ................................................ >90 dB at maximum output (unweighted)
Crosstalk ....................................... <-65 dB @ 20 kHz, <-80 dB @ 1 kHz and below 60 Hz
Stereo channel separation .......... >80 dB @ 1 kHz
CMRR ............................................ >75 dB @ 20 Hz to 20 kHz
Audio input
Number/signal type ................... 2 stereo, unbalanced
Connectors .................................... (2) 3.5 mm female stereo jacks
Impedance .................................... >10k ohms, balanced/unbalanced, AC coupled
Nominal level ............................... -10 dBV (316 mVrms)
Maximum level ............................ +8 dBV, (balanced or unbalanced) at 1% THD+N
0 dBu = 0.775 Vrms, 0 dBV = 1 Vrms, 0 dBV 2 dBu
1-2
Extron SW2 VGA DA2 A, SW2 VGA DA2 AF, SW2 VGA DA2 AF R • Specifications
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
