Extron SW 6 AV MX - Manual
Extron SW 6 AV MX – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
1-2
SW 6 CV MX, SW 6 SV MX, SW 6 SA MX, SW 6 AV MX, SW 6 SV A MX • Specifications
Specifications — SW 6 CV/SV/SV A/SA/AV MX Switchers
Video
Gain ............................................... Unity
Bandwidth .................................... 30 MHz (-3dB)
Differential phase error .............. 0.01º, 4.43 to 30 MHz
Differential gain error ................. 0.03%, 4.43 to 30 MHz
Crosstalk ....................................... -70dB @ 3.58 MHz
Switching speed ........................... 160 nS (max.)
Video input
Number/signal type ................... 6 S-video ................................... SW 6 SV MX, SW 6 SV A MX
6 composite video ................... SW 6 CV MX, SW 6 AV MX
Connectors .................................... 6 4-pin mini-DIN female ....... SW 6 SV MX, SW 6 SV A MX
6 BNC female .......................... SW 6 CV MX, SW 6 AV MX
Minimum/maximum levels ...... Analog ....... 0.3V to 1.5V p-p with no offset
Impedance .................................... 75 ohms (all inputs are terminated at 75 ohms)
Return loss .................................... -41dB @ 5 MHz
External sync (genlock) ............... 0.3V to 0.4V p-p
Video output
Number/signal type ................... Individually buffered
2 S-video ................................... SW 6 SV MX, SW 6 SV A MX
2 composite video ................... SW 6 CV MX, SW 6 AV MX
Connectors .................................... 2 4-pin mini-DIN female ....... SW 6 SV MX, SW 6 SV A MX
2 BNC female .......................... SW 6 CV MX, SW 6 AV MX
Minimum/maximum levels ...... Analog ....... 0.3V to 1.5V p-p
Impedance .................................... 75 ohms
Return loss .................................... -47dB @ 5 MHz
DC offset ....................................... ±5mV maximum with input at 0 offset
Switching type ............................. Vertical interval
Sync
Genlock connectors ..................... 2 BNC female
Standards ...................................... NTSC, PAL, SECAM
Input level ..................................... 0.3V to 5.0V p-p ........ SW 6 SV A MX
0.5 to 5.0V p-p ........... all other models
Output level .................................. TTL ............. 4V to 5V p-p
Polarity .......................................... Positive or negative (follows input)
Audio — SW 6 SA MX, SW 6 SV A MX, and SW 6 AV MX only
Gain ............................................... Unbalanced -15dB to +9dB, balanced -9dB to +15dB
Frequency response ..................... 20 Hz to 20 kHz, ±0.05dB
THD + Noise ................................ 0.03% @ 1 kHz, 0.3% @ 20 kHz at rated maximum output drive
S/N ................................................ >90dB at rated maximum output drive
Crosstalk ....................................... <-65dB @ 20 kHz, <-80dB @ 1 kHz or below 60 Hz, fully loaded
Stereo channel separation .......... >80dB @ 20 Hz to 20 kHz
CMRR ............................................ >75dB @ 20 Hz to 20 kHz
Audio input — SW 6 SA MX, SW 6 SV A MX, and SW 6 AV MX only
Number/signal type ................... 6 stereo, balanced/unbalanced
Connectors .................................... 6 3.5 mm captive screw connectors, 5 pole
Impedance
SW 6 SV A MX ................. >10 kohms unbalanced, >20 kohms balanced, DC coupled
SW 6 SA MX, SW 6 AV MX >25 kohms balanced, 50 kohms unbalanced, DC coupled
Maximum level ............................ +15dBu, (balanced or unbalanced) at stated %THD+N
Input gain adjustment ................. -15dB to +9dB, adjustable per input
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.