Extron SW 2 RGB - Manual
Extron SW 2 RGB – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
1-2
SW2 RGB • Specifications
Video
Gain ............................................... Unity
Bandwidth .................................... 350 MHz (-3dB)
Video input
Number/signal type ................... 2 RGBHV, RGBS, RGsB, RsGsBs
Connectors .................................... 2 x 5 BNC female
Minimum/maximum levels ...... Analog ....... 0.4V to 1.2V p-p with no offset at unity gain
Impedance .................................... 75 ohms
Horizontal frequency .................. 15 kHz to 135 kHz
Vertical frequency ....................... 30 Hz to 170 Hz
Video output
Number/signal type ................... 1 RGBHV, RGBS, RGsB, RsGsBs
Connectors .................................... 5 BNC female
Minimum/maximum levels ...... Analog ....... 0.4V to 1.2V p-p
Impedance .................................... 75 ohms
Sync
Input type ..................................... RGBHV, RGBS, RGsB, RsGsBs
Output type .................................. RGBHV, RGBS, RGsB, RsGsBs
Standards ...................................... NTSC, PAL, SECAM
Input level ..................................... 1V to 5V p-p
Output level .................................. 5V p-p
Input impedance .......................... 510 ohms
Output impedance ...................... 75 ohms
Polarity .......................................... Positive or negative (follows input)
Control/remote — switcher
Contact closure ............................ 9-pin female D connector
Contact closure pin configurations 1 = input 1, 2 = input 2, 8 = ground
General
Power ............................................. 100VAC to 240VAC, 50/60 Hz, 10 watts, internal, auto-switchable
Temperature/humidity .............. Storage -40° to +158°F (-40° to +70°C) / 10% to 90%, non-condensing
Operating +32° to +122°F (0° to +50°C) / 10% to 90%, non-condensing
Rack mount ................................... Yes (1U high, ½-rack width), with optional shelf
Enclosure type .............................. Metal
Enclosure dimensions ................. 1.75" H x 8.75" W x 9.5" D
4.4 cm H x 22.2 cm W x 24.1 cm D
(Depth excludes connectors.)
Shipping weight ........................... 5 lbs (2.3 kg)
Vibration ....................................... ISTA/NSTA 1A in carton (International Safe Transit Association)
Approvals ..................................... UL, CUL, CE
MTBF ............................................. 30,000 hours
Warranty ....................................... 2 years parts and labor
Specifications are subject to change without notice.
(7.2-050301-D1)
Specifications — SW2 RGB Switcher
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
