Extron SVDA 6 A MX - Manual
Extron SVDA 6 A MX – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Specifications — SVDA 6 A MX Distribution Amplifier
Video
Gain ................................................ Unity
Bandwidth ..................................... 30 MHz (-3 dB)
Frequency response .................... < ± 0.1 dB @ 15 MHz
Differential phase error .............. 0.03° at 3.58 MHz and 4.43 MHz
Differential gain error ................. 0.05% at 3.58 MHz and 4.43 MHz
Crosstalk ....................................... -60 dB @ 3.58 MHz
Video input
Number/signal type ................... 1 S-video
Connectors ................................... (1) 4-pin mini DIN female
Nominal level ............................... 1 Vp-p for Y of S-video
0.3 Vp-p for C of S-video
Minimum/maximum levels ....... Analog: 0.4 V to 1.4 Vp-p with no offset at unity gain
Impedance .................................... 75 ohms
Return loss .................................... <-30 dB @ 5 MHz
Video output
Number/signal type ................... 6 S-video
Connectors ................................... (6) 4-pin mini DIN
Nominal level ............................... 1 Vp-p for Y of S-video
0.3 Vp-p for C of S-video
Minimum/maximum levels ....... 0.4 V to 1.4 Vp-p
Impedance ....................................
Return loss ....................................
DC offset .......................................
Sync
Standards ......................................
Audio
Gain ................................................
Frequency response ....................
THD + Noise .................................
75 ohms
<-30 dB @ 5 MHz
±5 mV with input at 0 offset
NTSC 3.58, NTSC 4.43, PAL, SECAM
Unbalanced output: 0 dB; balanced output: +6 dB
20 Hz to 20 kHz, ±0.05 dB
0.03% @ 1 kHz at nominal level
S/N ................................................ >90 dB, output 21 dB, balanced, at maximum output (unweighted)
Stereo channel separation .......... >80 dB @ 1 kHz; >60 dB @ 20 kHz
CMRR ............................................ >75 dB @ 20 Hz to 20 kHz
Audio input
Number/signal type ................... 1, 2, or 4 stereo balanced (Hi Z or 600 ohms), unbalanced (Hi Z)
Connectors ................................... (1, 2, or 4) 3.5 mm captive screw connector, 5 pole
Impedance .................................... >25k ohms balanced, 50k ohms unbalanced, DC coupled
Maximum level ............................ +24 dBu (balanced or unbalanced) at 1%THD+N
0 dBu = 0.775 Vrms, 0 dBV = 1 Vrms, 0 dBV 2 dBu
Audio output
Number/signal type ................... 6, 12, or 24 stereo, balanced/unbalanced
Connectors ...................................
Impedance ....................................
Gain error .....................................
Maximum level (Hi-Z) ................
Maximum level (600 ohm) .........
(6, 12, or 24) 3.5 mm captive screw connector, 5 pole
50 ohms unbalanced, 100 ohms balanced
±0.1 dB channel to channel
>+24 dBu, balanced or unbalanced at 1%THD+N
>+15 dBm, balanced or unbalanced at 1%THD+N
1-2
SVDA 6 A MX Distribution Amplifier • Specifications
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
