Extron SFI244 Series - Manual

Table of Contents:

• Page 2 – Precautions; Safety Instructions • English; FCC Class A Notice; Extron’s Warranty
• Page 3 – IPL T SF24 and IPL T SFI244 • Quick Start Guide; Turn all of the equipment off; and disconnect it from the power; Mount the IPL T interface; to the IPL T unit and to a host PC,; Quick Start Guide — IPL T SF24 and SFI244; IP
• Page 4 – Quick Start Guide — IPL T SF24, IPL T SFI244,; IPL T SF24 and IPL T SFI244 • Table of Contents; Chapter 1 • Introduction; Configuring the IPL T interface using the ARP command .; Chapter 4 • Communication and Control; Table of Contents; iii; Attach the serial communication cables; IPL T interface configuration; Communicate with the IPL T interface; Communication with the interface
• Page 5 – Table of Contents, cont’d; Specifications; Appendix B • Glossary; Communication with the Interface; Controlling IR devices or sending IR commands (SFI244 only); Customization; iv
• Page 6 – Chapter One; Introduction; About this Manual
• Page 7 – IPL T SF24 and IPL T SFI244 • Introduction; Features
• Page 8 – Chapter Two; Installation and Operation; Installation Overview; Easily configured and controlled —; Using a standard Telnet client application.; Choice of mounting options; — Can be mounted under a; Remote management; — Allows you to remotely manage; Multiple protocols supported
• Page 9 – Only products in the IPTools; Mount the IPL T unit. See; Attach the cables. See; Mounting the IPL T Interface; Rack mounting
• Page 10 – Installation and Operation, cont’d; Figure 2-4 — IPL T SF24 rear panel; Power; Power connection; Plug the external 12V power supply; CAUTION; Furniture or projector mounting; , hold the interface with the; Figure 2-3 — Mounting the IPL T SFI244; IN
• Page 11 – Serial communication; Four I/O ports permit connection of; COM ports; connector into this socket for serial ports 1 and 2.; COM1 and COM2—; Plug a serial cable into this 9-pin D; IR/Serial out ports —; ) or the graphical control program for Windows; Figure 2-6 — Power connector wiring; A blinking yellow LED indicates; LAN connector; Plug an RJ-45 jack into this socket to; Link LED; The green LED lights to indicate a good LAN; SECTION A–A
• Page 12 – IPL T SF24 and IPL T SFI244 • Installation and Operation; Front panel indicators; Figure 2-11 — IPL T SF24 front panel; Identification; Figure 2-9 — Example application using I/O ports; Operation; Connection and
• Page 13 – — Holding the Reset button while applying power will; IR pickup sensor —; Resetting the unit
• Page 14 – Chapter Three; Connection and Configuration; Connecting the Hardware; flash twice; or; flash three times; Mode 4; blink four times in quick succession,
• Page 15 – Connection and Configuration, cont’d; Serial connection; Figure 3-1 — IPL T interface connections; Ethernet connection
• Page 16 – Configuring the Hardware; PC configuration; Initial start up; Communication; Configuring the IPL T using the ARP command; IR Learning
• Page 17 – Figure 3-6 — Unit response to a ping request; arp –d; table; Configuring the IPL T using direct PC connection; Use ARP to configure the IP address as follows:; Figure 3-5 — Executing the ARP command
• Page 18 – IPL T SF24 and IPL T SFI244 • Connection and Configuration; Chapter Four; Communication and Control; Ports Overview; IPL T interface configuration,; Firmware upgrades; Upgrading the firmware
• Page 19 – Communication and Control, cont’d; Digital input; Figure 4-3 — equivalent digital input circuit; Establishing
• Page 20 – Analog input; Bidirectional serial control interface ports; — On some IPL T units, serial control is; Captive Screw Connectors; — On other IPL T units, several of; Digital output
• Page 21 – Figure 4-8 — Web server Password window; Establishing or changing system or port settings; Web server; Accessing and using the Web server
• Page 22 – IPL T SF24 and IPL T SFI244 • Communication and Control; Select the Configuration tab.
• Page 23 – Editing and adding e-mail alerts; Click the Edit button to go into edit mode.; Setting and changing your passwords; To set or change the passwords:
• Page 24 – Sending an e-mail alert through Telnet; Managing files
• Page 25 – Click the Upload File button to upload the file.; Creating a driver with the IR Learner software; Figure 4-19 — Creating a new driver
• Page 26 – Figure 4-20 — Selecting driver functions; Using the command/response table; For Web browsers; not; URL; must; ASCII to HEX Conversion Table
• Page 27 – User password cannot be assigned if no administrator; Symbol definitions; For Web encoding only; be a minus
• Page 28 – This parameter is case sensitive.; Copyright information
• Page 29 – Communication and Contr; Command/response table for Simple Instruction Set (SIS) commands; Command ASCII (Telnet); Bidirectional Serial Data port
• Page 30 – IP Setup Commands; Command
• Page 31 – IP Setup Commands, continued; Re-map port designations
• Page 32 – Server side includes; Where x is the SIS command to be executed.; Host; Figure 4-22 — Example of SSI “host” command; SIS Command; Server Side Include Using; Event Contr
• Page 33 – Figure 4-23 — Example of SSI “remote” command; Query string; The basic format for a query string within a link is:; URL with a Query String using a Remote SIS command; Server Side Include Using a Remote SIS command; RS; URL with a Query String using a Host SIS command; DHCP off; Code examples; Example 1
• Page 34 – Figure 4-26c — Browser view; Example 2; Figure 4-27b — Browser view
• Page 35 – Example 3; Figure 4-28b — Browser view; Example 4; Figure 4-29b — Browser view
• Page 36 – Example 5; The; Example 6
• Page 37 – Figure 4-31b — Browser view; URL encoding; Characters; Reserved characters; possibility
• Page 38 – Figure 4-33 — Connecting to the IP address; Using direct access; Command/response table; Custom Web pages; Accessing and using Telnet; At the command prompt, type “open” and press Enter.
• Page 39 – Close the Telnet session to end the direct access session.; Port redirect; Serial Link Software User’s Guide; Troubleshooting; Power connections; Ensure that all devices are plugged in.; Data connections; Connecting the Hardware,; MA
• Page 40 – Appendix A; and Accessories
• Page 41 – Digital inputs; General; Ethernet control interface; autodetect; Serial control interface; serial; Flex I/O control interface
• Page 42 – IPL T SF24 and IPL T SFI244 • Glossary; Appendix B; Glossary; Parts; Included parts; Optional accessories; Accessories
• Page 44 – Ping