Extron RGB 560/Dual - Manual

Table of Contents:

• Page 2 – Precautions; Safety Instructions • English; FCC Class A Notice
• Page 3 – RGB 500 Series • Table of Contents; Table of Contents; Chapter 1 • Introduction
• Page 4 – Table of Contents, cont’d; Chapter One; Introduction; About this Manual; Appendix D • Accessories and Part Numbers; Interfaces
• Page 5 – RGB 500 Series features
• Page 6 – RGB 500 Series • Introduction; Chapter Two; Installation and Operation; Installing the RGB 500 Series Interfaces; Local monitor pins; — These DIP switches are used for routing
• Page 7 – Installation and Operation, cont’d; Mount the interface to the mounting bracket.; Installing the RGB 500 Series Interfaces; Determine the installation location.; Installation and Operation Instructions; Determining installation location
• Page 8 – injury to yourself or the cables during installation.; Installing the mounting bracket with clips; Insert the mounting bracket into the opening in the wall.; Backing clip orientations; Installing the mounting bracket with screws; Insert the bracket back into the hole.; Setting bottom and top panel switches; , the DIP and jumper switches
• Page 9 – Bottom panel features; Wiring a captive screw connector for audio output; Sync polarity jumper switch; Changing the sync jumper switches; Captive screw power connector —
• Page 10 – Bottom panel DIP switches —; DDSP will disable horizontal shift control.; — Composite sync; Top view of an RGB 500 Series interface
• Page 11 – • Use the right two pins to increase the output signal and add; Attaching adapter plates; Installing optional adapter plates
• Page 12 – Setting front panel switches; Front panel features — RGB 500 series, RGB 508 series; Front panel features — RGB 560 series, RGB 568 series
• Page 13 – & 2 — Local monitor pins; Connecting input cables; A typical RGB 560 application
• Page 14 – For further assistance, call the Extron S; Mounting the interface to the mounting bracket
• Page 15 – RGB 500 Series • Installation and Operation; Appendix A; Specifications; Interface Specifications; Attaching the faceplate; Adjust horizontal centering as needed.
• Page 16 – Specifications, cont’d; AKM models; maximum output drive; All models
• Page 17 – RGB 500 Series • Specifications; Appendix B; RGB 568 Rough-in Template; General; hardware; Enclosure dimensions — RGB 500 Dual, RGB 508, RGB 560 Dual, RGB; Safe Transit Association); All other models; Specifications are subject to change without notice.
• Page 18 – mplates; emplate; Use this template as a guide for cutting the hole in the; emplate f
• Page 19 – RGB 500 Series • Rough-in Templates; Appendix C; Dimensions
• Page 20 – RGB 500 Dual faceplate dimensions; All dimensions are given in inches.; RGB 500 faceplate dimensions
• Page 21 – RGB 500 Series • Dimensions; Appendix D; Accessories and Part Numbers; RGB 508 faceplate dimensions
• Page 22 – Accessories and Part Numbers, cont’d; • four adapter plates with a “plate size” of one,; Architectural adapter plates
• Page 23 – Accessories and Part Numbers, cont
• Page 24 – VGA cables; Part number; Monitor breakout cables; al
• Page 25 – Mac 15-pin HD F adapter cable kit w/audio; High-resolution cables; Bulk installation cable
• Page 26 – RGB 500 Series • Accessories and Part Numbers