Extron RGB 404 - Manual

Table of Contents:

• Page 2 – Precautions; Safety Instructions • English; FCC Class A Notice
• Page 3 – RGB 400 Series Table of Contents; Chapter 1 • Introduction; DIP switches; Appendix A • Specifications; Table of Contents
• Page 4 – Table of Contents, cont’d; Chapter One; Introduction; About This Manual; Appendix C • Dimensions
• Page 5 – RGB 400 Series Introduction; Chapter Two; Installation and Operation; Installation Overview; RGB 400 Series features
• Page 6 – Installation and Operation, cont’d; Determining installation location; Determine the installation location.
• Page 7 – Attaching the wall box to wall studs
• Page 8 – RGB 406 front and rear features; If this LED is on, power and sync pulses; Front and rear panel (circuit board) features; Extron; power and video sync pulses are present.
• Page 9 – REAR; Auto power LED; RGB 402 front and rear features
• Page 10 – — Settings are shown on; RGB 404 front and rear features
• Page 11 – RGB 408 front and rear features
• Page 12 – RGB 400 Series gain/peaking jumpers; Setting DIP switches and jumpers; Changing jumper settings
• Page 13 – Cabling RCA connectors; should be connected to the grounded metal wall; Installing optional adapter plates; Cabling and connections; Attaching cables to pass-through connectors; S-video connector wiring diagram
• Page 14 – Wiring RGB 404 audio connectors; Wiring audio output captive screw connectors; Connecting audio cables — RGB 404; on two RCA input connectors (one each for left and; • Audio channel two (CH2) consists of unbalanced left and
• Page 15 – If the image does not appear or there is no sound; Ensure that all devices are plugged in.; Using installation cable; Below is an example of how the cable can be used.; Using installation cable with an RGB 402; Connecting audio cables — RGB 406, RGB 408; Solder and insulate the connections.
• Page 16 – Mounting the interface to the wall box; Detach the input cables from the front panel.; Installing EMI strips on the wall box; If the image does not display correctly
• Page 17 – Application diagrams; A typical RGB 406 application
• Page 18 – RGB 400 Series Installation and Operation; Appendix A; Specifications
• Page 19 – Specifications, cont’d; maximum output drive; These specifications apply to all models unless otherwise noted.
• Page 20 – Enclosure dimensions (RGB 402 and RGB 404); Specifications are subject to change without notice.; Audio output — RGB 404 (channels 1 and 2); conductor; General; Enclosure dimensions (RGB 400 and RGB 406)
• Page 21 – RGB 400 Series Specifications; Appendix B; Templates; RGB 408 Cut-out Template
• Page 23 – RGB 400 Series Templates; Appendix C; Dimensions; without; mplate; Use this template for cutting a hole in a wall or
• Page 24 – RGB 402 Panel Dimensions; RGB 400 Panel Dimensions; Extr
• Page 25 – RGB 406 Panel Dimensions
• Page 26 – RGB 408 Panel Dimension Details; RGB 408 Panel Dimensions
• Page 27 – RGB 400 Series Dimensions; Appendix D; Accessories and Part Numbers; Interfaces and Included Parts
• Page 28 – Part Numbers and Accessories, cont’d; Part number; Part Numbers and Accessories
• Page 29 – Pre-cut high resolution cables; Optional Adapter Plates; • four adapter plates with a “plate size” of one,; Architectural adapter plates
• Page 31 – RGB 400 Series Part Numbers and Accessories