Extron RFF 054 - Manual
Extron RFF 054 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
© 2011 Extron
®
Electronics. All rights reserved.
+31.33.453.4040
+31.33.453.4050
Extron
Japan
+81.3.3511.7655
+81.3.3511.7656
FAX
+86.21.3760.1568
+86.21.3760.1566
68-2160-01
Rev. A
07 11
RFF 052 and RFF 054 False Plates
for 1-inch Products Installation Guide
The Extron
®
False Plates for 1-inch Products increase the face height of 1-inch tall,
quarter rack width (RFF 054) or half rack width (RFF 052) products to full single rack unit
height (1U), aiding airflow management and aesthetics. Install plates as follows:
1.
Clean the 1-inch tall Extron device to be rack mounted of any dust or debris.
2.
Remove the protective film from the adhesive tape on the RFF 052 or RFF 054.
3.
Align the plate on the top of the device so that the adhesive faces the device and the
raised side runs flush with the front panel of the device.
4.
Firmly press the plate onto the device.
5.
Install the 1-inch tall device to the rack shelf.
2
4
5
3
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
