Extron P/N 68-412-02 - Manual
Extron P/N 68-412-02 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – Hughes Installation; Connecting System 4; xi; to Hughes/JVC Projectors
- Page 3 – Extron • System 4; Configuration and Connections; instructions on page 4.; Use illustration below as a guide when connecting the System 4; Connecting the System 4; to a Hughes/JVC Model 400 Projector; System 4
- Page 4 – Use the illustration below as a guide when connecting the System 4; to a Hughes/JVC HJT 200 Projector
- Page 5 – Special Instructions for the HJT Model 100/200 Series; To select the Baud Rate from the Projector:; Select Edit from the submenu and press Enter.
- Page 7 – Series – Hughes-JVC DILA Projector Connections
Extron • System 4
xi
Switcher Series • User’s Manual • P/N 68-412-02 Rev. A
Configuration and Connections
Hughes Installation
SYSTEM 4
xi
PROJECTOR COMMUNICATIONS KIT
ATTENTION!
PLEASE READ THIS DOCUMENT FOR IMPORTANT
INSTALLATION INSTRUCTIONS
THIS KIT HAS BEEN SHIPPED WITH THE FOLLOWING COMPONENTS:
Kit Type: HUGHES
Included Communications Adapter(s):
Quantity
Part Number
Description
1
26-467-01
ADP, UNV, “A”
THE TABLE BELOW LISTS THE POSSIBLE CONFIGURATION(S) AND CORRESPONDING
COMMUNICATIONS ADAPTER(S) FOR YOUR PROJECTOR MANUFACTURER’S VARIOUS
MODELS. PLEASE NOTE THAT YOUR SWITCHER HAS BEEN CONFIGURED AS
INDICATED BY THE “
✔
” IN THE “CONFIG AS” COLUMN. IF YOUR PROJECTOR MODEL
DIFFERS FROM THIS CONFIGURATION, YOU MUST RECONFIGURE YOUR SWITCHER
WITH THE CORRECT SETTINGS.
PLEASE REFER TO THE FOLLOWING PAGES FOR COMPLETE CONFIGURATION AND
SIGNAL CONNECTION INSTRUCTIONS.
THIS SWITCHER HAS BEEN CONFIGURED FOR:
HUGHES
CONFIG
MODEL
SW1
SW2 SW3 SW4 SW5 SW6 PROJ
COMM
AS
1
2
3
4
CABLE
ADAPTER
✔
Hughes-JVC
off on off on
0
0
5
6
0
J15
26-467-01
Hughes DILA
off on off on
0
0
8
F
0
J15
26-467-01
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
Extron • System 4 xi Switcher Series • User’s Manual • P/N 68-412-02 Rev. A Hughes Installation Configuration and Connections (Note: Information depends onSystem 4 setup.) (See note.) (See note.) (See note.) (See note.) [System 4 model and software version displayed here] Page 1 } Connecting System ...
Extron • System 4 xi Switcher Series • User’s Manual • P/N 68-412-02 Rev. A Configuration and Connections Hughes Installation Page 2 "A" ADP UNV "A" 26-467-01 6. Plug the 15-pin HD connector of the Projector Communications Extension cable (CC 50' or CC 100') into the PJ Comm port on ...
Extron • System 4 xi Switcher Series • User’s Manual • P/N 68-412-02 Rev. A Hughes Installation Configuration and Connections Page 3 System 4 xi - Hughes/JVC Model HJT 100/200 Series Connections Use the illustration below as a guide when connecting the System 4 xi to a Hughes/JVC HJT 100/200 project...
