Extron MSW 4V SDI - Manual
Extron MSW 4V SDI – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – The MSW ships with an external 12VDC power supply.; Installation; Rack mounting; Use 2 mounting holes on; Figure 2 — MSW mounted on a standard rack shelf; For furniture mounting,; hold the MSW with the attached brackets
- Page 3 – Projector Mounting; Figure 3 — Desk and projector mounting the MSW; Rear Panel Connections; Figure 4 — MSW 4V SDI rear panel; CAUTION; Figure 5 — Power connector wiring; CONTACT
- Page 4 – Connections; Front Panel Controls and Indicators; Figure 6 — MSW 4V SDI front panel; Mode selection; Specifications
- Page 5 – FCC Class A Notice; Contact closure pin configurations See switcher’s label.; General; Specifications are subject to change without notice.
User’s Guide
Mini Serial Digital Interface Switcher
68-643-01
Rev. A
Printed in the USA
06 02
VersaTools™ MSW 4V SDI
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
VersaTools™ MSW 4V SDI Mini Switcher • Installation 3 VersaTools™ MSW 4V SDI Mini Switcher • Installation Installation 2 Introduction The Extron MSW 4V SDI is a four-input, two-parallel-output, mini SDI(serial digital interface) switcher (MSW). The MSW is a member of theExtron VersaTools™ line of ba...
VersaTools™ MSW 4V SDI Mini Switcher • Connections 5 VersaTools™ MSW 4V SDI Mini Switcher • Connections Installation 4 4 . For furniture mounting, drill 3/32” (2 mm) diameter pilot holes, 1/4” (6.3 mm) deep in the mounting surface at the marked screwlocations. 5 . For furniture mounting, insert #8 w...
VersaTools™ MSW 4V SDI Mini Switcher • Specifications 7 VersaTools™ MSW 4V SDI Mini Switcher • Controls and Indicators Connections 6 To verify the polarity before connection, check the no load powersupply output with a voltmeter. Alternatively, an Extron P/S 100 Universal 12VDC Power Supplycan power...
