Extron MMX 32 VGA A - Manual

Table of Contents:

• Page 2 – Precautions; Safety Instructions • English; FCC Class A Notice; Extron’s Warranty
• Page 3 – MMX 32 VGA A • Table of Contents
• Page 4 – Chapter 1 • Introduction; Table of Contents
• Page 5 – Table of Contents, cont’d; Chapter One; Introduction; About this Manual; Appendix A • Specifications; Specifications
• Page 6 – Extron; Figure 1-1 — Typical MMX 32 VGA A application; Features
• Page 7 – MMX 32 VGA A • Introduction; Chapter Two; Installation and Operation; Mounting the MMX 32 VGA A
• Page 8 – UL requirements; Tabletop use
• Page 9 – Installation and Operation, cont’d; Rack mounting instructions; Attach the rack shelf to the rack using the supplied bolts.; Furniture mounting; Rear Panel Features and Cabling; Figure 2-4 — MMX 32 VGA A rear panel features; Inputs; Video and audio inputs —; Connect computer video sources to; Figure 2-5 — Audio input connection
• Page 10 – Outputs; Figure 2-6 — Audio output connections; • If the stripped section of wire is longer than 3/16”, the; Remote control connections; Figure 2-7 — Power connection wiring; CAUTION; • If the stripped section of wire is longer than 5/16”, the
• Page 11 – Do not daisy chain power to this unit.; Front Panel Features and Operation; Figure 2-8 — Front panel features; Input selector buttons and LEDs for output 1 —; Input selector buttons and LEDs for output 2 —; Press the; Executive mode; • Input 1 button for output 1; System reset
• Page 12 – MMX 32 VGA A • Installation and Operation; Chapter Three; Remote Control; Contact Closure Control
• Page 13 – MMX 32 VGA A • Remote Control; Simple Instruction Set control; character string. A string is one or more characters.; Switcher-initiated message; Figure 3-1 — Remote connector pin arrangement
• Page 14 – Remote Control, cont’d; esponse table for SIS commands; Command; reate ties; RGB mute; Using the command/response table; = Output number1 or 2
• Page 15 – Loading firmware using an SIS command; Firmware can be uploaded two ways:; upload SIS command entered via a; upload” SIS commands.; iew ties and output mute; Information r
• Page 16 – Figure 3-2 — Turn on the echo function
• Page 17 – Windows-based control program; Installing the software; RGB Delay & Unit Reset window
• Page 18 – Updating the firmware; Run the Universal Switcher Control Program.; Using the help system; For contact closure do not use pins 2 or 3.
• Page 19 – Figure 3-8 — MMX 32 AAP rear panel; Input Selection connector; Input 2 pole —; Connect this pole of the captive screw connector; Input 3 pole —; Connect this pole of the captive screw connector; Tally Power connector; Connect this pole of the captive screw connector; GND pole —; Connect this pole of the captive screw connector
• Page 20 – Appendix A; and Accessories
• Page 21 – at unity gain
• Page 22 – Included Parts; Replacement; Optional Accessories; Accessories; Control/remote — switcher; Specifications are subject to change without notice.