Extron MLP 101 D - Manual
Extron MLP 101 D – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Specifications — MLP 101, MLP 101 AAP, MLP 101 D
Audio
Gain ............................................... Adjustable, +25 dB to + 72 dB
Frequency response ..................... 20 Hz to 20 kHz, ±0.1 dB
THD + Noise (with a 10 Hz to 80 kHz bandwidth filter)
0.03% when input is -48 dBV and output is +4 dBu.
0.14% when input is -60 dBV and output is -10 dBV
S/N ................................................ 92 dB at maximum output (unweighted, with a 10 Hz to 80 kHz bandwidth filter)
CMRR ............................................ >70 dB @ 20 Hz to 20 kHz
Low cut filter ................................ 75 Hz (18 dB per octave)
Equivalent input noise ................ <126 dBV (unweighted, with a 10 Hz to 80 kHz bandwidth filter)
Audio input
Number/signal type ................... 1 mono, balanced
Connectors
MLP 101 ............................ (1) 3.5 mm captive screw connector, 3 pole
MLP 101 AAP, MLP 101 D 1 female 3-pin XLR
Impedance .................................... 2k ohm balanced
Nominal level ............................... -60 dBV or -48 dBV
Maximum level ............................ -1.5 dBu, (balanced) at 1% THD+N
0 dBu = 0.775 Vrms, 0 dBV = 1 Vrms, 0 dBV 2 dBu
Audio output
Number/signal type ................... 1 mono, balanced
Connectors .................................... (1) 3.5 mm captive screw connector, 3 pole
Impedance .................................... <150 ohms balanced
Maximum level (Hi-Z) ................ >+25 dBu, balanced at 1% THD+N
Maximum level (600 ohm) ......... >+20 dBu, balanced at 1% THD+N
Control/remote — preamp
Contact closure ............................ (1) 3.5 mm captive screw connector, 3 pole
Contact closure pin configurations 1 = +10 VDC, 2 = volume/mute (variable voltage), 3 = GND
Volume control voltage range ... 0 V (mute) to 10 V (maximum volume)
Extron remote key pad control .. (1) 3.5 mm captive screw connector, 3 pole
General
External power supply ............... 100 VAC to 240 VAC, 50/60 Hz, external; to 12 VDC, 1 A, regulated
Power input requirements ......... 12 VDC, 0.3 A
Temperature/humidity .............. Storage: -40 to +158 °F (-40 to +70 °C) / 10% to 90%, noncondensing
Operating: +32 to +122 °F (0 to +50 °C) / 10% to 90%, noncondensing
Cooling .......................................... Convection, unvented
Rack mount
MLP 101 ............................ Yes, with optional 1U, 9.5" deep rack shelf, part #60-190-01 (RSU 129) or 60-604-01
(RSB 129); or VersaTools
®
1U, 3.5" deep rack shelf, part #60-190-20 (RSF 123) or
60-604-20 (RSB 123); or VersaTools Back of the Rack mount kit, part #70-367-01
(MBB 100)
Furniture-mountable with optional VersaTools mini under-desk mounting kit ,
part #70-212-01 (MBU 123)
Projector mountable with optional kit PMK 100, part #70-217-01.
MLP 101 AAP ................... Yes, with optional faceplate or frame
MLP 101 D ........................ No, but wall or furniture mountable in a Decora -style opening
Enclosure type .............................. Metal
1-2
Extron MLP 101, MLP 101 AAP, MLP 101 D Microphone to Line Preamps • Specifications
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.