Extron MLM 104 2GWP - Manual
Extron MLM 104 2GWP – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – MLM 104 Faceplates Installation Guide, cont’d; MLM 104 Faceplates • Installation Guide
- Page 3 – in the diagram; CAUTION; Lift the faceplate off the MLC 104 IP Plus, as shown below.; Extr
- Page 4 – Replace the four screws removed in step; Templates; MLC 104 IP User’s Manual; These templates are not to scale.
- Page 5 – and; NOT; SURFACE CUT-OUT AREA
- Page 6 – MLM 104 LAAP template; AREA FOR; TEMPLATE IS
- Page 10 – © 2007 Extron Electronics. All rights reserved.
1
MLM 104 Faceplates • Installation Guide
MLM 104 Faceplates Installation Guide
MLM 104 Faceplates
This guide provides instructions for installing the following Extron MediaLink
™
Mounting Options faceplates, which are designed for use with MLC 104 IP Plus
MediaLink Controllers.
The MLM 104 L, MLM 104 2GWP, or MLM 104 4GWP faceplate is shipped
with the MLC 104 IP Plus controller, depending on the controller configuration
that is ordered. The rest of the mounting options described below may be
ordered separately as replacements, or for use with an MLC 104 IP Plus that is
ordered without a faceplate.
•
MLM 104 L
— A low-profile, 3.15" H x 6.50" W (8.0 cm H x 16.5 cm W)
lectern/furniture-mounting faceplate. This faceplate is required when you are
mounting an MLC 104 IP Plus using an optional UCM RAAP or UCM 10X8P
mounting kit.
Part numbers:
70-357-02 (black), 70-357-03 (white), 70-357-05 (RAL9010 white)
•
MLM 104 LAAP
— A low-profile, 3.15" H x 10.00" W (8.0 cm H x 25.40 cm W)
lectern/furniture-mounting faceplate with an opening that accommodates
four single-space AAPs
Part numbers:
70-358-02 (black), 70-358-03 (white), 70-358-05 (RAL9010 white)
68-878-01,
Rev. D
08 07
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
MLM 104 Faceplates Installation Guide, cont’d MLM 104 Faceplates • Installation Guide 2 • MLM 104 2GWP — A two-gang (4.50" H x 4.60" W [11.43 cm H x 11.68 cm W]) faceplate that can be mounted to a mud ring (mounting bracket), an ExtronSurface Mount Box, an Extron External Wall Box, or a stan...
3 MLM 104 Faceplates • Installation Guide Replacing the MLC 104 IP Plus Faceplate with an MLMFaceplate 1. If your MLC controller is already installed in a wall or furniture, remove thefour screws that attach it to its mounting surface (marked a in the diagram below), and lift it out. 2 . After the M...
MLM 104 Faceplates Installation Guide, cont’d MLM 104 Faceplates • Installation Guide 4 4. Align the openings in the new MLM faceplate with the controller ’s buttons,knob, and LEDs, then place the new faceplate on the MLC 104 IP Plus. 5. Replace the four screws removed in step 2 , and hand tighten t...
