Extron MBU 123 - Manual

Extron MBU 123

Extron MBU 123 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.

1 Page 1
Page: / 1
Loading the manual

© 2011 Extron Electronics. All rights reserved.

www.extron.com

Extron

USA - West

-

Headquarters

+800.633.9876

Inside USA/Canada Only

+1.714.491.1500

+1.714.491.1517

FAX

Extron

USA - East

+800.633.9876

Inside USA/Canada Only

+1.919.863.1794

+1.919.863.1797

FAX

Extron

Europe

+800.3987.6673

Inside Europe Only

+31.33.453.4040
+31.33.453.4050

FAX

Extron

Asia

+800.7339.8766

Inside Asia Only

+65.6383.4400
+65.6383.4664

FAX

Extron

Japan

+81.3.3511.7655
+81.3.3511.7656

FAX

Extron

China

+400.883.1568

Inside China Only

+86.21.3760.1568
+86.21.3760.1566

FAX

Extron

Middle East

+971.4.2991800
+971.4.2991880

FAX

68-705-01

Rev. B

05 11

MBU 123 Under Desk Mounting Kit and

PMK 100 Mini Pole Mount Kit Installation Guide

Furniture mount or projector mount the quarter-rack width product using the optional

mounting kit (part number 70-212-01, furniture; or 70-217-01, projector) as follows:

1.

Attach the mounting brackets to the product with the machine screws provided
(see the figure on the other side of this card).

2.

If feet were previously installed on the bottom of the unit, remove them.

For furniture mounting —

3.

Hold the unit with the attached brackets against the underside of the table or other
furniture. Mark the location of the screw holes of the bracket on the mounting
surface.

4.

Drill 3/32-inch (2 mm) diameter pilot holes, 1/4 inch (6.3 mm) deep in the mounting
surface at the marked screw locations.

5.

Insert #8 wood screws into the four pilot holes. Tighten each screw into the mounting
surface until just less than 1/4 inch of the screw head protrudes.

6.

Align the mounting screws with the slots in the brackets and place the unit against the
surface, with the screws through the bracket slots.

7.

Slide the unit slightly forward or back, then tighten all four screws to secure the unit in
place.

MBU 123 Under Desk Mounting Kit and

PMK 100 Mini Pole Mount Kit Installation Guide,

Continued

For projector mounting —

1.

Using a locally-supplied nut and bolt, or other appropriate hardware, secure the
product to a projector mount or other surface by inserting the mounting hardware
through the slotted hole in the bracket.

DISTRIBU

TION AM

PLIFIER

Projector Mounting
Bracket

MD
A 3V

DU
AL

PO
W

ER

15V

.5

A

MA
X

1

2

3

INPU

T

OU
TPUT

S

1

2

3

A

B

Mounting
Bolt

Projector Mounting

Under Desk Mounting

"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.

Other Extron Models

All Extron Other