Extron IPI 204 AAP - Manual
Extron IPI 204 AAP – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Specifications — IPI 201 Series and IPI 204 Series
1
Extron IPI 201, IPI 201 AAP, IPI 204, IPI 204 AAP • Specifications
Audio
Speaker ������������������������������������������� 1�4" (35�6 mm), 1-way, indoor
Frequency response
Line level output ��������������� 20 Hz to 3�3 kHz, ±1 dB
Speaker output ������������������ 300 Hz to 3�3 kHz, -10 dB
Nominal sensitivity/IPI speaker output level
80 dB SPL, 300 mW, 3' (1 m)
Processing
Audio format ��������������������� PCM, µ-law companded
Sampling rate ��������������������� 8 kHz
Sample size ������������������������� 16 bit, µ-law companded to 8 bit
Audio latency��������������������� <100 ms
Audio input
Number/signal type ��������������������� 1 mono, via integrated electret microphone
Microphone gain ��������������������������� -30 dB to 0 dB, adjustable in 2 dB steps
N
0 dBu = 0.775 Vrms, 0 dBV = 1 Vrms, 0 dBV
≈
2 dBu
Audio output
Number/signal type ��������������������� 2 mono: 1 via audio output port, 1 via IPI speaker
Line level output ��������������������������� -10 dBV (316 mVrms), balanced/unbalanced (via 3�5 mm captive screw
connector, 3 pole)
Amplified speaker output ������������ 300 mW, continuous, 1% THD
Ethernet control interface
Ethernet control/communications port
1 RJ-45 female connector
Ethernet data rate/transport bandwidth
80 kbps
Communications type ������������������ Half duplex
Ethernet protocol ��������������������������� TCP/IP (control), UDP (port 3121, audio), Telnet
Default settings ������������������������������ Link speed and duplex level: autodetected
IP address = 192�168�254�254
Subnet mask = 255�255�0�0
Default gateway = 0�0�0�0
DHCP = off
Program control ����������������������������� Extron's control/configuration program for Windows
®
Extron's Simple Instruction Set (SIS
™
)
Microsoft
®
Internet Explorer ver� 6 or higher, Telnet
Control — relay
Number/type �������������������������������� 1 momentary or latching (configurable)
Connector ��������������������������������������� (1) 3�5 mm captive screw connector, 2 pole, C (common) and NO (normally
open) for configurable relay output
Contact rating �������������������������������� 24 V, 1 A
General
External power supply ����������������� 100 VAC to 240 VAC, 50/60 Hz, external; to 12 VDC, 2 A, regulated
Power input requirements ����������� +12 VDC, 0�25 A
Temperature/humidity ���������������� Storage: -40 to +158 °F (-40 to +70 °C) / 10% to 90%, noncondensing
Operating: +32 to +122 °F (0 to +50 °C) / 10% to 90%, noncondensing
Mounting
Rack mount ������������������������ Yes, with optional faceplate and rack mounting kit
Furniture mount ���������������� Yes, furniture- and wall-mountable with optional faceplate and mounting kits
Enclosure type ������������������������������� Metal faceplate
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
