Extron IPI 104 - Manual
Extron IPI 104 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Specifications — IPI 101, IPI 104
1
Extron IPI 101, IPI 104 Intercom Interface Panels • Specifications
Audio— IPI 101, IPI 104 and MLC 226 IP
Speaker ������������������������������������������� 1�4" (35�6 mm), 1-way, indoor
Frequency response
Line level output (MLC)��� 20 Hz to 3�3 kHz, ±1 dB
Speaker output
IPI �������������������������������� 300 Hz to 3�3 kHz, -10 dB
Nominal sensitivity/IPI speaker output level
80 dB SPL, 300 mW, 3' (1 m)
Processing
Audio format ��������������������� PCM, µ-law companded
Sampling rate ��������������������� 8 kHz
Sample size ������������������������� 16 bit, µ-law companded to 8 bit
Audio latency��������������������� <100 ms
Audio input— IPI
Number/signal type ��������������������� 1 mono, via integrated electret microphone
Microphone gain ��������������������������� -30 dB to 0 dB, adjustable in 2 dB steps
N
0 dBu = 0.775 Vrms, 0 dBV = 1 Vrms, 0 dBV
≈
2 dBu
Audio output
Number/signal type ��������������������� 2 mono: 1 via MLC 226 IP, 1 via IPI speaker
Line level (MLC) ���������������������������� -10 dBV (316 mVrms), unbalanced
(via 3�5 mm captive screw connector, 2 pole)
Amplified speaker
IPI ���������������������������������������� 300 mW, continuous, 1% THD
Ethernet control interface via MLC 226 IP
Ethernet control/communications port
1 RJ-45 female connector
Ethernet data rate/transport bandwidth
80 kbps
Communications type ������������������ Half duplex
Protocol ������������������������������������������� TCP/IP (control), UDP (port 3121, audio), Telnet
Program control (via MLC)���������� Extron's control/configuration program for Windows
®
Extron's Simple Instruction Set (SIS
™
)
Microsoft
®
Internet Explorer, Telnet
General
Power ���������������������������������������������� Supplied by an MLC 226 IP
Power input requirements ����������� +12 VDC, <100 mA
Distance between MLC 226 IP and an IPI ������ 100' (30�5 m), maximum
Connection type (IPI–MLC)��������� RJ-45 jacks with CAT 5, CAT 5e, or CAT 6 cable
Temperature/humidity ���������������� Storage: -40 to +158 °F (-40 to +70 °C) / 10% to 90%, noncondensing
Operating: +32 to +122 °F (0 to +50 °C) / 10% to 90%, noncondensing
Mounting
Rack mount ������������������������ Yes, with optional faceplate
Furniture mount ���������������� Also furniture- and wall-mountable with optional faceplate or in an
MLC 226 IP AAP faceplate
Enclosure type ������������������������������� Metal faceplate
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
