Page 2 - Precautions
This symbol is intended to alert the user of important operating and maintenance(servicing) instructions in the literature provided with the equipment. This symbol is intended to alert the user of the presence of uninsulated dangerousvoltage within the product's enclosure that may present a risk of ...
Page 3 - Table of Contents
Table of Contents Product Overview ............................................................................................................ 2 Description ...................................................................................................................... 2 Features................
Page 4 - Product Overview; Description
IN1403 User’s Manual 2 Product Overview Description The IN1403 is a full featured video scaler that combines digital video decoding, advanced video scaling/line multiplication and a 4-input A/V switcher into a single product. Features Superb Video Scaling Technology — Employing sophisticated video d...
Page 5 - Compatibility; Input
IN1403 User’s Manual 3 System Info — A handy menu option that uses the on-screen display to show comprehensive information about the input and output signals and scaler settings. Image Size, Position and Edge Blanking Controls — Individual horizontal and vertical image adjustments make it easy to pr...
Page 6 - Installation; CAUTION
IN1403 User’s Manual 4 Installation This section offers step-by-step instructions for installing the IN1403 Video Scaler. An application diagram is provided on page 5. CAUTION Read the instructions carefully before initiating the installation procedure. Make sure that there is no power connected to ...
Page 7 - IN1403 application diagram; Operation; Front Panel Controls
IN1403 User’s Manual 5 IN1403 application diagram Figure 1 — IN1403 application diagram Operation This section focuses on operating the IN1403 using the front panel controls and commands. All video and audio adjustments, setup functions and switching operations can be performed through the front pan...
Page 9 - IN1403 on-screen display menu system
IN1403 User’s Manual 7 IN1403 on-screen display menu system Main Menu Video Audio Input Output Advanced Video Audio Input Output Advanced Brightness Bass Signal Format Resolution Factory Reset Contrast Treble Aspect Ratio Refresh Rate Baud Rate Color Balance Hz Tracking Size Delimiters Hue Reset Aud...
Page 10 - Menu Commands; Video Menu
IN1403 User’s Manual 8 Menu Commands Video Menu The IN1402 allows you to manually adjust the brightness, contrast, color, hue, sharpness, gamma, noise filter, and comb/trap filter settings. To access the video adjustment menu via the front panel control buttons 1. Press the desired Input Select butt...
Page 11 - Sharpness; Noise Filter
IN1403 User’s Manual 9 Hue (NTSC signals only) adjusts the picture’s color towards red or green. Range : 0 to 40 Factory default setting : 20 Operation : Press button to increase the green. Press button to increase the red. Sharpness uses variable filtering to affect input picture detail and definit...
Page 12 - Audio menu
IN1403 User’s Manual 10 Comb/Trap Filter selects either the comb or trap filter (only available with composite video). The comb filter electronically provides excellent Luma/Chroma separation (separates the color from the picture signal). This greatly reduces cross-color interference and hanging dot...
Page 13 - Input menu
IN1403 User’s Manual 11 Input menu To access the input menu via the front panel control buttons 1. Press the desired Input Select button. 2. Press MENU, press the or button (if necessary) to reach the input menu. 3. Press ENTER . 4. Select the setting you wish to adjust by using the and buttons and ...
Page 14 - Example 2
Page 16 - Output menu; for a complete listing.; Advanced menu
IN1403 User’s Manual 14 Output menu To access the output menu via the front panel control buttons, do the following: 1. Press the desired Input Select button. 2. Press MENU (press the or button to reach the output menu, if necessary). 3. Press ENTER . 4. Use the and buttons and the ENTER key to sele...
Page 17 - Reset RS-232 Settings; CRT displays: Selecting the golden resolution
IN1403 User’s Manual 15 Factory Reset: Returns all video, audio, input, output and RS-232 settings for all inputs to factory default. Baud Rate: Allows RS-232 remote users to select the baud rate that matches their remote control device system. Delimiters: Use the on-screen menu to select the desire...
Page 18 - CRT displays: Selecting the optimal refresh rate
IN1403 User’s Manual 16 CRT displays: Selecting the optimal refresh rate CRT displays may tend to flicker at refresh rates below 70 Hz In order to achieve a solid, flicker-free image, an output refresh rate of 72 Hz or 75 Hz is recommended for most CRT displays. You should also experiment with even ...
Page 20 - Advanced Operation; Pass-through RGB video; The IN1403 can be set to output any of the following output modes:; Resolution Mode
IN1403 User’s Manual 18 Advanced Operation Pass-through RGB video Input 4 is for passive RGB video. No scaling or video functions are available for this input. Only switching of the RGB signal is provided from the front panel or the RS-232 control. All color and sync signals are passed through an in...
Page 21 - Output positioning; ENTER; MENU; Remote Operation
IN1403 User’s Manual 19 Power-on settings Power-on settings let you adjust key IN1403 settings without using on-screen menus. This may be particularly helpful if the IN1403 has been accidentally set for a mode that is incompatible with the display device, preventing the viewing of the on-screen menu...
Page 26 - Troubleshooting
IN1403 User’s Manual 24 Troubleshooting Problem: There is no image on the display device. • Solution 1: Make sure that the power cable is securely plugged into the unit and the A/C source. • Solution 2: Make sure the A/C source is live. • Solution 3: Verify that the power switch is turned on for the...
Page 28 - Problem: The desired Input Aspect Ratio cannot be selected.; Problem: The output size will not decrease.; Specifications
IN1403 User’s Manual 26 Problem: The desired Input Aspect Ratio cannot be selected. • Solution 1: The IN1403 can only scale up. Increase the output resolution until the desired aspect ratio is available. • Solution 2: Manually decrease the image size by using the output menu. • Solution 3: Select a ...
Page 29 - Part Numbers; Included Parts
IN1403 User’s Manual 27 Rack mount ................................... Yes, with optional mounting brackets Enclosure type ............................. Metal Enclosure dimensions ................. 1.7" H x 21" W x 11.5" D (1U high, full rack wide) 4.3 cm H x 21.6 cm W x 15.2 cm D (Depth...
Page 31 - Extron’s Warranty
Extron’s Warranty Extron Electronics warrants this product against defects in materials and workmanship for a periodof two years from the date of purchase. In the event of malfunction during the warranty periodattributable directly to faulty workmanship and/or materials, Extron Electronics will, at ...
