Extron GB 190F - Manual
Extron GB 190F – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Specifications — RGB 190F, RGB 192, RGB 198,
RGB 198 EU
1
Extron RGB 190F, RGB 192, RGB 198, RGB 198 EU Interfaces • Specifications
Video
Gain ������������������������������������������������� Unity (0�7 V), (0�8 V) 15% with 3 dB peaking
Max� rise/fall time ������������������������ 1�5 ns
Bandwidth �������������������������������������� 300 MHz (-3 dB)
Video input and loop through
Number/signal type ��������������������� 1 analog VGA–QXGA, Mac, Sun RGBHV, RGBS, RGsB
1 buffered local monitor loop-through identical to the input
Connectors ������������������������������������� (1) female 15-pin HD (input)
(1) female 15-pin HD (loop-through)
Nominal level �������������������������������� 0�7 Vp-p for RGB
Minimum/maximum levels �������� Analog: 0�3 V to 1�45 Vp-p with no offset at unity gain
Impedance �������������������������������������� 75 ohms
Horizontal frequency �������������������� 15 kHz to 130 kHz
Vertical frequency �������������������������� 30 Hz to 170 Hz
Return loss �������������������������������������� <-41 dB @ 5 MHz
DC offset (max� allowable)����������� 4 V
Video output
Number/signal type ��������������������� 1 RGBHV, RGBS, RGsB
Connectors ������������������������������������� 6 BNC female
Nominal level �������������������������������� 0�7 Vp-p for RGB
Minimum/maximum levels �������� 0�7 V to 0�8 Vp-p (switch selectable) with peaking
Impedance �������������������������������������� 75 ohms
Return loss �������������������������������������� -45 dB @ 5 MHz
DC offset ����������������������������������������� ±5 mV with input at 0 offset
Sync
Input type ��������������������������������������� RGBHV, RGBS, RGsB (does not strip sync from video)
Output type ������������������������������������ RGBHV at all times, RGBS at all times, RGsB (switch selectable)
Input level �������������������������������������� 2�0 V to 5�5 Vp-p with ±0�2 VDC offset (max�)
Output level ����������������������������������� 4�0 V to 5�0 Vp-p, unterminated
Input impedance ��������������������������� 510 ohms
Output impedance ������������������������ 75 ohms
Max� propagation delay ��������������� 57 ns
Max� rise/fall time ������������������������ 4 ns
Polarity�������������������������������������������� RGBHV input: positive or negative (follows input)
RGBS, RGsB input: negative
Audio— all models except RGB 190F
Gain ������������������������������������������������� Unbalanced output: 0 dB; balanced output: +6 dB
Frequency response ���������������������� 20 Hz to 20 kHz, ±0�05 dB
THD + Noise ���������������������������������� 0�03% @ 1 kHz, 0�3% @ 20 kHz at nominal level
S/N �������������������������������������������������� >90 dB at maximum output (14 dBm), balanced, unweighted
Crosstalk ����������������������������������������� <-90 dB @ 1 kHz
Stereo channel separation ������������ >90 dB @ 1 kHz to 20 kHz
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.