Extron FLS 101 - Manual

Table of Contents:

• Page 2 – ii; Precautions/Safety Instructions; Safety Instructions • English; Instrucciones de seguridad • Español; 安全须知; 注意
• Page 3 – iii; Conventions Used in this Guide; Copyright; © 2011 Extron Electronics. All rights reserved.; Trademarks; mation; Use only the specified AC adapter. Use of another type of AC adapter
• Page 4 – iv
• Page 5 – Contents; Introduction; FPM 101 Power Meter — Controls and; Maintenance and Troubleshooting; Mandrels for Multimode Transmit Reference; Reference Material; Fiber Optic Test Meters • Contents
• Page 7 – Fiber Optic Test Meters • Introduction; This user guide covers the following products:; Features; The Fiber Optic Test Set offers:; durable canvas tool bag.; This introduction covers the following topics: :; About this User Guide
• Page 8 – Fiber Optic Test Meters • Introduction; The FPM 101 Power Meter offers:; Power measurements in dBm or μW insertion loss in dB.; The FLS 101 Light Source offers:; Integrated LED and laser light source.; FPM 101 Power Meter and FLS 101 Laser Source; Power Source; If the battery level becomes too low, each unit turns itself off.
• Page 9 – Typical Applications; The fiber optic test kit offers these typical applications:; FLS 101 Light Source:; Certify multimode and singlemode links per TIA/EIA standards; Accessories; contaminates to ensure accurate measurements and operation.
• Page 10 – Operation; Fiber Optic Test Meters • Operation; Typical Test Connections
• Page 11 – FPM 101 Power Meter — Controls and Connections; Adapts the thread-on optical input to various fiber optic cable; “Power Up the FPM 101”
• Page 12 – HELD pON; Wavelength/Backlight Button; When using the FLS 101 set to a WAVE ID output, the FPM 101
• Page 13 – Test Mode: To Set a Reference; “Testing Fiber; Set the FPM 101 to the desired measurement mode (dBm or uW) (see; Button”; HELD SET; Test Mode: To View the Reference; Single WAVE ID mode —; Splash and Auto-Off Screen; — When the unit is about to power down
• Page 14 – OPM4 Models; Display Readings in Test Mode; Item Field; LO
• Page 15 – FLS 101 Light Source — Controls and Connections; FLS 101 Light Source
• Page 16 – Output Ports and Indicators; — LED source multimode optical output.; Output Wavelength Selection; Press and release the button to return to the WAVE ID mode.
• Page 17 – Measuring Optical Power; “Cleaning Optical; on page 17 for details.; To Measure Optical Power; Turn on the FPM 101 power meter by pressing the power button (; “Testing Fiber Optic Links”; Press the wavelength button (; Power Measurement Connections
• Page 18 – Testing Fiber Optic Links; Test the Transmit Reference Cable:; “Output; on; Transmit Reference Cable Connection
• Page 19 – or; Clean all fiber connections and repeat step; The; Transmit Reference Cable Connection After Reference Set; Verify the Reference Cables:; Disconnect the transmit reference cable from the FPM 101.; Clean both ends of the receive reference cable.
• Page 20 – Connect the receive reference cable to the FPM 101.; Connect the Receive Reference Cable; through; Insert the Link; receive reference cables from the coupler or bulkhead.
• Page 21 – Clean reference cable and link ends prior to each test.; Connections to Measure Link Insertion Loss
• Page 22 – Using the Tone Generator; cut or disconnected causing a disruption of critical services.; Tone Identification Connections; To Quickly Identify a Fiber Optic Link; Connect the light source to one end of the link to
• Page 23 – Cleaning Optical Ports; Off; . Disconnect the external supply from the FLS 101.; Cleaning FPM 101 Optical Ports; Unscrew the adapter cap from the adapter cap mount.; Fiber Optic Test Meters • Maintenance
• Page 24 – Cleaning FLS 101 Optical Ports; Be certain to use 99% IPA that has not been contaminated.; Repair and Calibration
• Page 25 – Mandrels for Multimode Transmit Reference Cables; NOT; use mandrels on multimode; receive; reference cables or singlemode reference cables.; Fiber Type; Contact Extron; Loops for Singlemode Transmit Reference Cables
• Page 26 – Specifications; Optical specifications — FLS 101 fiber optic output; Spectral width; Optical specifications— FPM 101; Fiber Optic Test Meters • Reference
• Page 27 – General
• Page 28 – Included Accessories; Description; FPM/FLS 101 Setup Guide
• Page 30 – and Central America:; USA; xtron; Warranty