Extron DVS 510 - Manual

Extron DVS 510

Extron DVS 510 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.

1 Page 1
2 Page 2
3 Page 3
4 Page 4
Page: / 4

Table of Contents:

  • Page 2 – DVI-I Input Connector; DVS 510 SA: Connect speakers; Female 15-pin HD Connector; Balanced Audio Output; Do not tin the wires!; For unbalanced audio, connect the sleeves to ground.; Unbalanced Stereo Input; LR; Do not tin the wires!
  • Page 3 – Product Category; Front Panel Features; NOTE; — Rotate these horizontal (
  • Page 4 – 011 Extron Electronics All rights reserved.; Configuring the DVS 510 Using the Front Panel; Series User Guide; Command
Loading the manual

Product Category

1

DVS 510 Series • Setup Guide

The Extron DVS 510 Series scalers are 10-input, multi-format presentation switching scalers that accept and scale DVI,
RGB, YUVp/HDTV, YUVi, S-video, and composite video signals to a common high-resolution output rate. Two models are
available: the standard DVS 510, which has fixed and variable line level audio outputs, and the DVS 510 SA, which adds an
integrated stereo amplifier. Control options include front panel buttons and knobs, Ethernet, RS-232 or RS-422, web pages,
and infrared (IR). This guide provides instructions for an experienced installer to install and connect the DVS 510 scalers.

NOTE:

For full installation, configuration, and operation details, see the

DVS 510 Series User Guide

, available at

www.extron.com

.

Rear Panel Features and Connections

100-240V 50-60 Hz

2A MAX

LAN

RESET

RS232

VID

VID

YC

RGB/R-Y, Y, B-Y

YC

DVI-I

DVI-D

AMPLIFIED

DVI-I

1

2

3

4

5

6

7/8

9/10

V

I

D
E
O

I

N
P
U
T

V

I

D
E
O

O
U

T
P
U
T

A
U
D

I

O

I

N
P
U
T

A
U
D

I

O

O
U

T
P
U
T

1

L

R

L

R

VARIABLE

FIXED

3

L

R

5

L

R

7

L

R

9

L

R

2

L

R

4

L

R

6

L

R

8

L

R

10

L

R

RGB/R-Y, Y, B-Y

L

R

L

R

RGB/R-Y, Y, B-Y

RGB/R-Y, Y, B-Y

10

9

1

4

5

6

8

7

11

12

13

14

15

2

3

a

AC power connector

h

Audio input connectors

b

Video inputs 1 and 2: Composite video

i

Amplified audio output connector (DVS 510 SA only)

c

Video inputs 3 and 4: S-video

j

Variable audio output connector

d

Video inputs 5 and 6: RGB or YUV component

k

Fixed audio output connector

e

Video inputs 7/8 and 9/10: RGB or YUV (7 and 9) and

l

Reset LED

DVI

(8

and

10)

m

Reset button

f

Buffered RGB/YUV output connectors

n

LAN connector

g

DVI-I output connector (digital output only)

o

RS-232/RS-422 connector

Installation Steps

1.

Disconnect power

from all equipment.

2.

(Optional)

Mount the unit.

Rack mount the scaler using the

attached brackets (see the illustration at right). For tabletop
placement, remove the brackets from the right and left sides
and attach the provided rubber feet.

3.

Connect video inputs.

Connect video input devices to the

appropriate connectors in the rear panel Video Input section
(

b

through

e

in the diagram above).

z

Video inputs 5 and 6: RGB or YUV component

Connect one or two RGBHV, RGBS, RGsB, RGBcvS, YUVi,
or YUVp/HDTV video sources to these female 15-pin HD
connectors (shown below). These connectors feature EDID
emulation.


NOTE:

(Optional) To obtain one or two more RGB/YUV inputs, you can connect an Extron DVIIM-VGAF/DVIIF
DVI and Analog Breakaway (Y) cable to either or both DVI-I input connectors. Each Y cable provides an
additional RGB VGA connector and DVI-I connector (see ”Breakaway cable” on the next page).

1

2

13

3

14

Inputs 5 and 6

MBD 249

2U Rack Mounting
Bracket (Pre-attached)

"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.

Summary

Page 2 - DVI-I Input Connector; DVS 510 SA: Connect speakers; Female 15-pin HD Connector; Balanced Audio Output; Do not tin the wires!; For unbalanced audio, connect the sleeves to ground.; Unbalanced Stereo Input; LR; Do not tin the wires!

DVS 510 Series • Setup Guide (Continued) 2 z Video inputs 7/8 and 9/10 — Connect two DVI video sources, two RGB/YUV sources, or one DVI and one RGB source to these DVI-I connectors. The analog portions of these connectors are identified as inputs 7 and 9, while the DVI portions are inputs 8 and 10. ...

Page 3 - Product Category; Front Panel Features; NOTE; — Rotate these horizontal (

Product Category 3 Front Panel Features MENU NEXT DETAIL ZOOM /PAN BRIGHT /CONT COLOR /TINT SIZE POSITION PIP ON/OFF PIP SWAP CONFIG IR MAX MID MIN 10 1 2 3 4 6 7 8 9 5 ADJUST VOLUME PICTURE CONTROLS PIP INPUTS DVS 510 DIGITAL VIDEO SCALER 1 2 3 4 5 6 7 8 9 a Input Buttons — Press one of these butto...

Page 4 - 011 Extron Electronics All rights reserved.; Configuring the DVS 510 Using the Front Panel; Series User Guide; Command

68-1290-50 Rev. A 04 11 4 Extron USA - West Headquarters + 800.633.9876 Inside USA/Canada Only +1.714.491.1500+1.714.491.1517 FAX Extron USA - East +800.633.9876 Inside USA/Canada Only +1.919.863.1794+1.919.863.1797 FAX Extron Europe +800.3987.6673 Inside Europe Only +31.33.453.4040+31.33.453.4050 F...

Other Extron Models

All Extron Other