Extron 64 Series - Manual

Specifications — MAV Plus 64 Series

1

Extron MAV Plus 3248 through MAV Plus 6464 • Specifications

Video— video BMEs

Routing ........................................... 64 x 64, 64 x 48, 64 x 32, 48 x 64, 48 x 48, 48 x 32, 32 x 48, or 32 x 64 matrix
Gain ................................................. Unity
Bandwidth ...................................... 150 MHz (-3 dB), fully loaded

0 - 10 MHz .......................... No more than +0.1 dB to -0.1 dB
0 - 130 MHz ........................ No more than +0.1 dB to -0.1 dB

Crosstalk ......................................... -80 dB @ 1 MHz, -62 dB @ 10 MHz, -52 dB @ 30 MHz
Switching speed ............................ 200 ns (max.)

Video input— video BMEs

Number/signal type ..................... 32, 48, or 64 composite video
Connectors ..................................... 32, 48, or 64 BNC female
Nominal level ................................ 1 Vp-p for composite video
Minimum/maximum levels ........ Analog: 0.5 V to 2.0 Vp-p with no offset
Impedance ...................................... 75 ohms
Horizontal frequency .................... 15 kHz to 150 kHz
Vertical frequency .......................... 30 Hz to 150 Hz
Return loss ...................................... <-30 dB @ 5 MHz
DC offset (max. allowable)........... 1.5 V

Video output— video BMEs

Number/signal type ..................... 32, 48, or 64 composite video
Connectors ..................................... 32, 48, or 64 BNC female
Nominal level ................................ 1 Vp-p for composite video
Minimum/maximum levels ........ 0 V to 2.0 Vp-p (follows input)
Impedance ...................................... 75 ohms
Return loss ...................................... <-30 dB @ 5 MHz
DC offset ......................................... ±5 mV with input at 0 offset
Switching type ............................... Vertical interval

Sync— video BMEs

Genlock connectors ....................... 1 BNC female
Standards ........................................ NTSC 3.58, NTSC 4.43, PAL, SECAM

Audio— audio BMEs

Routing ........................................... (32, 48, or 64) x (32, 48, or 64) stereo or mono matrix

N

Both stereo (2 channel) and mono (1 channel) audio models are available.

Gain ................................................. Unbalanced output: -6 dB; balanced output 0 dB
Frequency response ...................... 20 Hz to 20 kHz, ±0.05 dB
THD + Noise .................................. 0.03% @ 1 kHz at nominal level
S/N .................................................. >90 dB, balanced, at maximum output (21 dBu), unweighted
Crosstalk ......................................... <-80 dB @ 1 kHz, fully loaded
Stereo channel separation ............ >80 dB @ 1 kHz
CMRR .............................................. >75 dB @ 20 Hz to 20 kHz

Audio input— audio BMEs

Number/signal type ..................... 32, 48, or 64 stereo balanced/unbalanced or

32, 48, or 64 mono balanced/unbalanced

Connectors

Stereo models ..................... (32, 48, or 64) 3.5 mm captive screw connectors, 5 pole
Mono models ..................... (32, 48, or 64) 3.5 mm captive screw connectors, 3 pole

Impedance ...................................... >10k ohm, balanced/unbalanced, DC coupled