Page 2 - Safety Instructions
Safety Instructions • English WARNING : This symbol, , when used on the product, is intended to alert the user of the presence of uninsulated dangerous voltage within the product’s enclosure that may present a risk of electric shock. ATTENTION: This symbol, , when used on the product, is intended to...
Page 3 - Conventions Used in this Guide; The following notifications are used:; A caution indicates a situation that may result in minor injury.; Specifications Availability:; Product specifications are available on the Extron website,; Copyright; © 2012 Extron Electronics. All rights reserved.; Trademarks
Conventions Used in this Guide The following notifications are used: CAUTION: A caution indicates a situation that may result in minor injury. ATTENTION: Attention indicates a situation that may damage or destroy the product or associated equipment. NOTE: A note draws attention to important informat...
Page 5 - Contents; Introduction
v Cable Cubby 300/600/800 • Contents Contents Introduction ............................................................ 1 About the Cable Cubby 300, 600, and 800 ........ 1Features ............................................................. 3 Installation .............................................
Page 6 - About the Cable Cubby; Universal AC Outlet Compatibility Guide; Cable Cubby 800 USA/domestic model
Cable Cubby 300/600/800 • Introduction 1 Introduction This section covers the following topics: • About the Cable Cubby ® 300, 600, and 800 • Features About the Cable Cubby 300, 600, and 800 Extron Cable Cubby products are furniture-mounted, architectural solutions that provide inconspicuous cable a...
Page 7 - Cable Cubby 300S US/domestic Enclosure; the lid. The lid can also be lowered into its recessed position.; Typical Cable Cubby 800 Application; ” on
Cable Cubby 300/600/800 • Introduction 2 Figure 1. Cable Cubby 300S US/domestic Enclosure The AAP spaces inside the Cable Cubby allow you to customize the enclosure to meet your unique needs. The split AAPs (included) can store almost any type of cable you might encounter. The Extron line of passive...
Page 8 - Cable Cubby 300C Mounting; Features; Enclosure
Cable Cubby 300/600/800 • Introduction 3 1 2 3 Figure 3. Cable Cubby 300C Mounting Features • Easy access to cables and AAPs • Compatible with several available AAP modules • Optional retractor available • Compact size • Flexible installation of Extron passive AAPs • Available universal AC outlet is...
Page 9 - Installation; Installation Overview; Flexible Conduit Kit Installation Guide; Preparing the Routing Template
Cable Cubby 300/600/800 • Installation 4 Installation This section covers the following topics: • Installation Overview • Preparing the Routing Template • Preparing the Table • Installing the Cables and AAPs • Mounting the Cable Cubby Installation Overview Install and set up the Cable Cubby enclosur...
Page 10 - Preparing the CC 300 Mounting Template; Preparing the Table; Potential damage to property; Top Plate; ” on page
Cable Cubby 300/600/800 • Installation 5 These strips raise the routing template above the mounting surface to provide room for the collar of the router, protect the mounting surface, and extend the reach of the routing template so that it can be clamped to the edge of the surface. HSA 200 USER A C ...
Page 11 - Preparing the Table with a Router; Cutting the Opening with a Router
Cable Cubby 300/600/800 • Installation 6 Preparing the Table with a Router Prepare the table with a router as follows: ATTENTION: Potential damage to property . The routing templates for the various Cable Cubby models are not interchangeable. If you use the wrong template, you will cut an improperly...
Page 12 - Preparing the Table with a Hole Saw (Cable Cubby 300C Only); Prepare the table with a hole saw as follows:; Cutting the Opening with a Hole Saw; Installing the Cables and AAPs; AAP Shelf Brackets; Shelf Brackets
Cable Cubby 300/600/800 • Installation 7 Preparing the Table with a Hole Saw (Cable Cubby 300C Only) Prepare the table with a hole saw as follows: 1. On the tabletop or other installation surface, mark the 6 inch circle, then find and mark the center of the circle. CAUTION: Risk of injury to the eye...
Page 13 - Consider the arrangement of; use the star washers with the screws.; Installing the Power Module
Cable Cubby 300/600/800 • Installation 8 The simplest way to install the cables and AAPs in the Cable Cubby 300, 600, and 800 is to populate the shelf brackets with split or standard AAPs outside the cubby and then install the populated AAP shelf assembly into the cubby. NOTE: On US/domestic models,...
Page 14 - Installing the Cables; Cable Pass-through AAPs; Insert the screws of the split AAP segment that you removed in step
Cable Cubby 300/600/800 • Installation 9 Installing the Cables Three half-moon cutouts in each set of cable pass-through (split) AAPs loosely channel three cables in the Cable Cubby. Each channel is padded with a split grommet to prevent cable wear. Each channel and each associated split grommet is ...
Page 15 - Installing the AAPs; figure 7; Installing the Shelf Assembly; Mounting the Cable Cubby; Risk of personal injury
Cable Cubby 300/600/800 • Installation 10 Installing the AAPs The split AAPs can be replaced with passive Extron AAPs.Replace a set of split AAPs as follows: 1. Remove the set of split AAPs to be replaced by unscrewing the nuts on the underside of the shelf bracket that fasten the plates to the brac...
Page 16 - Cable Cubby 300C, Installation View
Cable Cubby 300/600/800 • Installation 11 Mounting Surface Screw Clamp Audio Cable RJ-45 Cable 15-pin HD Cable Cable Cubby 300C Surface-MountableEnclosure for Cables, AAPs,and AC Power Outlet Figure 10. Cable Cubby 300C, Installation View 4. From the underside of the table, reinstall the screw clamp...
Page 17 - This section covers the following topics:; Removing and Replacing the Cable Cubby; Risk of electrical shock
Cable Cubby 300/600/800 • Maintenance and Modifications 12 Maintenance and Modifications This section covers the following topics: • Removing and Replacing the Cable Cubby • Replacing Cables or an AAP • Adding an Additional Power Module (CC 600, CC 800) The Cable Cubby can be modified after installa...
Page 18 - Removing the Cubby and its Shelves; Lift the enclosure from the table.
Cable Cubby 300/600/800 • Maintenance and Modifications 13 ExtronCable Cubby 800 Pins Phillips Head Screw(Secures AAP Shelf Assemblyand Power Module.) Screw Clamp Figure 11. Removing the Cubby and its Shelves 4. Lift the enclosure from the table. CAUTION: Risk of personal injury . The flanged edges ...
Page 19 - Replacing Cables or an AAP; Adding an Additional Power Module (CC 600 and CC 800); Cable Cubby 300 models
Cable Cubby 300/600/800 • Maintenance and Modifications 14 ATTENTION: Potential damage to property . Do not overtighten the Phillips head screws on the screw clamps. Overtightening can bend the horizontal flange of the screw clamp. 10. Snugly tighten the Phillips head screws on the screw clamps to s...
Page 20 - Figure; Cable Cubby 600 and 800 US/domestic models; — You probably; do; need
Cable Cubby 300/600/800 • Maintenance and Modifications 15 Single Power Module Three AAP Space Shelf Two AAP Space Shelf Two AAP Space Shelf Two Power Modules UNSWITCHED 230~50/60Hz 5A UNSWITCHED 230~50/60Hz 5A UNSWITCHED 230~50/60Hz 5A Figure 12. Cable Cubby 600 with Power Module(s) Figure 13 shows...
Page 21 - or; Cable Cubby 800 with Second Power Module
Cable Cubby 300/600/800 • Maintenance and Modifications 16 UNSWITCHED 100-240V/ 5AMAX UNSWITCHED 100-240V/ 5AMAX UNSWITCHED 100-240V/ 5AMAX UNSWITCHED 100-240V/ 5AMAX UNSWITCHED 100-240V/ 5AMAX UNSWITCHED 100-240V/ 5AMAX UNSWITCHED 100-240V/ 5AMAX UNSWITCHED 100-240V/ 5AMAX UNSWITCHED 100-240V/ 5AMA...
Page 23 - Cable Cubby Part Numbers; Part Number
Cable Cubby 300/600/800 • Reference Information 18 Reference Information This section covers the following topics : • Cable Cubby Part Numbers • Included Parts • Replacement/Modification Part Numbers • Routing Template Part Numbers • Top Plate Dimensions Cable Cubby Part Numbers Cable Cubby 300S Par...
Page 24 - Included Parts; Cable Cubby; Replacement/Modification Part Numbers; Template
Cable Cubby 300/600/800 • Reference Information 19 Included Parts The Cable Cubby includes the Cable Cubby Setup Guide and a selection of shelf brackets, cable pass-through AAPs, grommets, and hole plugs that vary depending on the Cable Cubby model. See the table below for included parts: AAP Cable ...
Page 25 - Top Plate Dimensions; preferred; not to scale
Cable Cubby 300/600/800 • Reference Information 20 Top Plate Dimensions There are two preferred and recommended methods for cutting the table: using the appropriate metal routing template (see figure 19 below and Installation on page 4 ), and using a router or a hole saw (Cable Cubby 300C only). HSA...
Page 26 - Cable Cubby 300S Cut-Out Template; Cable Cubby 600 Cut-Out Template; Cable Cubby 800 Cut-Out Template
Cable Cubby 300/600/800 • Reference Information 21 User Access Cut-Out Template for Cable Cubby 300S TEMPLATE IS NOT FULL SIZE. SURFACE CUT-OUT AREA = 4.625" (11.7 cm) x 5.97" (15.2 cm) Cut-Out Radius: 0.25" (0.6 cm) 0.5" (1.3 cm) 4.625" (11.7 cm) Top Panel Cut surface materialou...
Page 27 - Extron Warranty; xtron
Extron Headquarters +1.800.633.9876 (Inside USA/Canada Only)Extron USA - West Extron USA - East +1.714.491.1500 +1.919.850.1000 +1.714.491.1517 FAX +1.919.850.1001 FAX Extron Europe +800.3987.6673 (Inside Europe Only)+31.33.453.4040 +31.33.453.4050 FAX Extron Asia +800.7339.8766 (Inside Asia Only)+6...
