Extron 3000 - Manual
Extron 3000 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Specifications — MKP 10/2000/3000 Series
Control/remote — keypad (MKP 2000, MKP 3000 Series)
Serial control port ........................ (2) RS-232 on (2) 3.5 mm, 3-pole captive screw connectors
Baud rate and protocol ............... Variable (9600 to 115200 baud), 9600 baud (default), 8 data bits, 1 stop bit, no parity
Serial control pin configurations 1 = TX, 2 = RX, 3 = GND
Ethernet control port ................... 1 RJ-45 female connector
Ethernet data rate ........................ 10/100Base-T, half/full duplex with autodetect
Ethernet protocol ......................... ARP, DHCP, ICMP (ping), TCP/IP, Telnet, HTTP, SMTP
client
Default settings ............................ Link speed and duplex level = autodetected
IP address = 192.168.254.253
Subnet mask = 255.255.0.0
Default gateway = 0.0.0.0
DHCP = off
Program control ........................... Extron’s Simple Instruction Set (SIS
™
)
Microsoft
®
Internet Explorer, Telnet
General
External power supply ............... 100 VAC to 240 VAC, 50/60 Hz, external, autoswitchable; to 12 VDC, 1 A,
regulated
Power input requirements ......... 12 VDC
MKP 10 MAAP ................ 150 mA
MKP 2000 .......................... 350 mA
MKP 3000, MKP 3000 MAAP
400 mA
MKP 3000 L ...................... 500 mA
Temperature/humidity .............. Storage: -40 to +158 °F (-40 to +70 °C) / 10% to 90%, noncondensing
Operating: +32 to +122 °F (0 to +50 °C) / 10% to 90%, noncondensing
Rack mount
MKP 10 MAAP ................ No, but mountable to an MAAP mounting frame or faceplate with MAAP
openings
MKP 3000 L ...................... Yes, with optional 2U rack panel, UCM RAAP, part #70-090-14.
Also furniture/lectern mountable.
Other models .................... No, but furniture/wall mountable in a wall box
Enclosure type .............................. Metal
Enclosure dimensions
MKP 10 MAAP
Faceplate ................... 2.8" H x 2.7" W x 0.05" D
(7.1 cm H x 17.8 cm W x 0.13 cm)
Circuit board ............ 2.6" H x 1.6" W x 0.36"
(6.6 cm H x 4.1 cm W X 0.9 cm)
MKP 2000, MKP 3000
Faceplate ................... 4.5" H x 4.6" W x 0.1" D (2 gang)
(11.4 cm H x 11.7 cm W x 0.3 cm D)
Enclosure .................. 2.7" H x 3.4" W x 2.0" D
(6.7 cm H x 8.6 cm W x 5.1 cm D)
Allow at least an additional 1" (2.5 cm) D for connectors and cable.
(Depth excludes connectors.)
MKP 3000 MAAP
Faceplate ................... 4.5" H x 6.4" W x 0.1" D (3 gang)
(11.4 cm H x 16.3 cm W x 0.3 cm D)
Circuit board ............ 2.8" H x 2.2" W x 1.3" D
(7.1 cm H x 5.6 cm W x 3.3 cm D)
1-2
MKP 10 MAAP, MKP 2000, MKP 3000/3000 MAAP/3000 L Remote Control Keypads • Specifications
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
