Extech Model 407510 - Manual
Extech Model 407510 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 4 – nts; Temperature Measurements
- Page 5 – Advanced Features; Data Hold; CPU Reset
- Page 6 – Replacement procedure
- Page 7 – Battery Replacement; Specifications; General Specifications
User Guide
Heavy Duty Dissolved Oxygen Meter
Model 407510
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
407510-en-GB_V7.6 7/15 4 Dissolved Oxygen (DO) Measurements Measurement Preparation Before taking measurements, perform the calibration described above if necessary. In addition, perform the % SALT and ALTITUDE compensation adjustments as described below: % SALT Compensation Slide the O 2 /DO switch...
407510-en-GB_V7.6 7/15 5 Advanced Features Data Hold Press the Data Hold key to freeze the displayed value. The LCD will display DH for Data Hold mode along with the held reading. Press the Hold key again to release the data hold function. MIN/MAX/AVG Data Recording When selected, the Data Recording...
407510-en-GB_V7.6 7/15 6 Probe Storage For short term storage, the probe should be stored in a moist environment to keep the membrane from drying out and needing replacement. Moisten the sponge with distilled water in the protective cap. Do not store it directly in the water since that could encoura...
