Extech HD200 - Manual
Extech HD200 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – WARNING
- Page 3 – Description; Meter Description
- Page 4 – Operation
- Page 5 – IR Description; IR (Infrared) Thermometer Measurement Considerations
- Page 6 – Setup Option Mode
- Page 8 – Battery Replacement; Other Battery Safety Reminders; USB PC Software and Interface
- Page 9 – Specifications; General Specifications; Copyright
USER GUIDE
Differential Thermometer Datalogger
Model HD200
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
HD200-en-GB_V2.3 4/15 2 Introduction Congratulations on your purchase of the Extech HD200 Differential Thermometer Datalogger. The HD200 supports differential temperature measurements using dual Type K thermocouple probe inputs and provides selectable units of °C, °F or °K. The large backlit LCD dis...
HD200-en-GB_V2.3 4/15 3 Description Meter Description 1. Thermocouple inputs 2. PC USB interface input 3. IR probe input jack 4. Up arrow button 5. SETUP & Display backlight button 6. Down arrow and Record button 7. Temperature units select button 8. MAX-MIN button 9. Display configuration butto...
HD200-en-GB_V2.3 4/15 4 Operation The Basics 1. Press to turn the thermometer on. Press and hold the button for 3 seconds to turn the meter off. 2. Press MAX/MIN to record and step through the maximum, minimum, and average readings for the T1 and T2 inputs (does not apply for the T3 IR input). When ...
