Extech Extech 470 - Manual
Extech Extech 470 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – International Safety Symbols; symbol indicates a potentially hazardous situation, which if not; symbol indicates a potentially hazardous situation, which if not; WARNING
- Page 3 – CAUTIONS; Do not directly view or direct the laser pointer at an eye.
- Page 6 – Operating Instructions; should be measured with great care.; DC VOLTAGE MEASUREMENTS; Large voltage surges may occur that can damage the meter.; COM; Insert the red test lead banana plug into the positive
- Page 10 – distance to spot size specification.; WARNING: Do not directly view or direct the laser pointer at an eye.; Low power visible lasers; Diameter of Spot
- Page 11 – CAPACITANCE MEASUREMENTS; Insert the red test lead banana plug into the positive jack.; FREQUENCY MEASUREMENTS; red test lead banana plug into the positive Hz jack.
- Page 13 – Specifications
- Page 15 – Maintenance; Battery Replacement
- Page 16 – Copyright; ISO
User's Guide
True RMS Multimeter
plus IR Thermometer
Extech 470
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
EX470-en-GB_v5.6 4/15 2 Introduction Congratulations on your purchase of the Extech 470 (part number EX470) True RMS Autoranging Multimeter plus IR Thermometer. This meter measures AC/DC Voltage, AC/DC Current, Resistance, Capacitance, Frequency, Duty Cycle, Diode Test, and Continuity plus Thermocou...
EX470-en-GB_v5.6 4/15 3 CAUTIONS Improper use of this meter can cause damage, shock, injury or death. Read and understand this user manual before operating the meter. Always remove the test leads before replacing the battery or fuses. Inspect the condition of the test leads and the meter itsel...
EX470-en-GB_v5.6 4/15 6 Operating Instructions WARNING : Risk of electrocution. High-voltage circuits, both AC and DC, are very dangerous and should be measured with great care. 1. ALWAYS turn the function switch to the OFF position when the meter is not in use. 2. If “OL” appears in the display dur...