Extech AN500 - Manual
Extech AN500 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – Meter Description
- Page 4 – Operation; Initialization and Zero
- Page 5 – Auto Power OFF
- Page 7 – Battery Replacement
- Page 8 – Specifications; General Specifications
- Page 9 – Useful Equations and Conversions
USER GUIDE
Hot Wire CFM/CMM Thermo-Anemometer
Model AN500
ft/min
o
F
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
AN500-EU-EN v1.5 1/13 2 Introduction Thank you for selecting the Extech Hot Wire CFM/CMM Thermo-Anemometer. This instrument measures air flow and temperature by placing the sensor into an airway such as a duct or a vent. The sensor is situated at the end of the telescoping wand for convenience. This...
AN500-EU-EN v1.5 1/13 4 Operation Initialization and Zero The meter should always be zeroed at temperature before use using the ZERO button. Do not rely on the initial zero display. Notes : The meter does not display negative numbers. Open antenna to desired length. 1. Connect the sensor to the ...
AN500-EU-EN v1.5 1/13 5 Auto Power OFF The meter is equipped with an Auto Power OFF (APO) feature. The meter will automatically switch OFF after 10 minutes of inactivity (no button pressed). Press and hold the POWER button for 1 second to disable the APO feature (the APO display icon will switch OFF...
