Extech 96VFL - Manual
Extech 96VFL – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – WIRING DIAGRAM
- Page 3 – PROGRAMMING LEVEL PARAMETERS
- Page 4 – PARAMETER DESCRIPTION
- Page 6 – tYPE; Time scale for timer alarm.; If A1FU=None, the alarm function is cancelled
- Page 7 – Code; ALARM TYPE
- Page 9 – SP-HYST; SP; Output; ERROR MESSAGE AND TROUBLESHOOTING
- Page 11 – Controller Overview
- Page 12 – Specifications
- Page 14 – Copyright
48VFL & 96VFL v1.2 07/13
INSTRUCTION MANUAL
VFL Series PID Controllers
■
FRONT PANEL DESCRIPTION
：
PV
－
Process Value
SV
－
Setting Value
AT
－
Auto tuning LED
MA
－
Manual mode LED
A1
－
Alarm 1 LED
A2
－
Alarm 2 LED
C1
－
Control 1 LED
C2
－
Control 2 LED
－
SET KEY. Press once to access the next programmable parameter. Press and hold this key for 5
seconds to reset alarm timer.
－
UP KEY. Press to increase the set point or parameter value.
－
DOWN KEY. Press to decrease the set point or parameter value.
－
SHIFT KEY. Press the shift key for 5 seconds to execute Auto Tune process (Yes. 1 mode). To abort
an Auto Tune process, press and hold the shift key for 5 seconds.
－
Press the SET and UP keys once to return the normal operation.
－
LEVEL KEYS. Press and hold the SET & SHIFT keys simultaneously for 5 seconds to select the
programming level, and then press the SET key to enter the selected level.
---Press the UP & DOWN keys simultaneously for 5 seconds to access “LnLo” & “LnHi” parameters.
■
PANEL CUTOUT
：
Model A B C D E a b c d
48VFL 48 48 6 100 45
45+0.5
45+0.5
60 48
96VFL 96 96 10 80 91
92+0.5
92+0.5
120 96
(Units: mm)
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
48VFL & 96VFL v1.2 07/13 ■ WIRING DIAGRAM ■ Wiring Precautions: 1. Before wiring, verify the controller label for correct model number and options. 2. For thermocouple input, use the appropriate compensation wire. And note the polarity of input signal. 3. To avoid noise induction, keep input sig...
48VFL & 96VFL v1.2 07/13 ■ PROGRAMMING LEVEL PARAMETERS ■ lst. Prog. Level 2nd. Prog. Level 3rd. Prog. Level 4 th Prog. Level 5 th . Prog. Level + 1. When 2nd Output (Cooling) is not selected, CPb 、 Cti 、 Ctd 、 HYS2 and db parameters are not available. 2. When Pb ≠ 0.0 ， HYS1 will be skipped. 3....
48VFL & 96VFL v1.2 07/13 ■ PARAMETER DESCRIPTION ： LEVEL Selection Press keys for at least 5 seconds to access Soft Level. Use or key to select programming level. Then press key to enter this level. LEVEL Description SoFt Level PID Level Option Level USER LEVEL CODE DESCRIPTION RANGE Default Set...
