Extech 407777 - Manual
Extech 407777 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 3 – Meter Description
- Page 4 – Preparation; Wood Moisture Measurements
- Page 6 – Battery Replacement; Calibration
- Page 8 – Calibration and Repair Services
User's Guide
Heavy Duty Wood Moisture Meter
Model 407777
Introduction
Congratulations on your purchase of the Extech 407777 Wood Moisture Meter. This meter
measures the moisture content of wood as a percentage. Measurements are made using
the supplied remote intrusive sensor.
Careful use of this meter will provide years of reliable
service.
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
Model 407777 Version 2.2 Jan 04 3 Meter Description 1. Sensor input: Use caution when inserting the sensor. 2. PC interface jack: For use with Model 407001 software and interface cable kit 3. LCD Display: Displays moisture content, temperature compensation, units of measure, and function symbols 4. ...
Model 407777 Version 2.2 Jan 04 4 Preparation 1. Insert the sensor into the sensor input jack on the meter top 2. Ensure that a fresh 9V battery is installed by powering the unit, observing that the LCD illuminates, and that the low battery indicator LBT is off. To access the rear battery compartmen...
Model 407777 Version 2.2 Jan 04 6 Battery Replacement When the low battery indicator LBT appears, the 9V battery should be replaced. 1. Remove the rubber protective holster that surrounds the meter. 2. Remove the battery compartment cover, located on the lower back of the meter, with a coin or a fla...
