Extech 407303 - Manual
Extech 407303 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – Specifications
- Page 3 – Meter Description
- Page 4 – Operation
- Page 5 – Conductivity Calibration; Sensor Care
- Page 6 – Battery Replacement; Warranty
User's Guide
Heavy Duty Conductivity / Temperature
Model 407303
Introduction
Congratulations on your purchase of Extech’s Conductivity/ Temperature Meter. This
meter offers a dual display for Conductivity and Temperature, a Conductivity Cell
calibration adjustment, temperature compensation, and a RS-232 PC Interface. This meter
is shipped fully tested and calibrated and with proper use will provide years of reliable
service.
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
407303 V3.1 01/06 2 Specifications Circuit Custom LSI microprocessor circuit Display Dual function 2000 count LCD with contrast adjust Measurement units Conductivity in Siemens (µS and mS); Temperature in o C/ o F Data hold Freezes displayed value Sensor Structure Remote Conductivity Sensor: 1K Carb...
407303 V3.1 01/06 3 Meter Description 1. Sensor input plug – The plug is keyed so that it can only be inserted one way into the sensor jack at top of meter 2. RS-232 PC Interface jack – For use with Model 407001 Data acquisition software and interface cable kit 3. LCD Display indicates Conductivity ...
407303 V3.1 01/06 4 Operation Connecting the Sensor 1. Remove the protective sheath from the sensor tip before use. Retain the sheath for sensor storage. 2. The sensor connects to the input jack at the top of the meter. The sensor jack is keyed, thereby allowing the sensor plug to be inserted from o...
