Everpure EV9799-04 - Manual
Everpure EV9799-04 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
B E N E F I T S
A P P L I C A T I O N / S I Z I N G
I N S T A L L A T I O N T I P S
O P E R A T I O N T I P S
S W S - 1 0 S e d i m e n t F i l t e r W r a p
A d d s s e d i m e n t f i l t r a t i o n c a p a b i l i t i e s t o W r a p S c a l e S t i c k ® , w h i c h
p r o v i d e s s c a l e a n d c o r r o s i o n c o n t r o l
SWS-10 Sediment Filter Wrap:
EV9799-05
SSW-10 Wrap ScaleStick:
EV9799-04
SWS-10 Sediment Filter Wrap:
EV9799-05
SSW-10 Wrap ScaleStick:
EV9799-04
Features Hydroblend™ compound, a unique
blend that inhibits mineral scale deposits and
provides corrosion protection in low flow water-
fed equipment
Patented design (patent no. 5,580,448) dispenses
a controlled amount of Hydroblend™ for long-
term protection and provides greater effectiveness
than standard phosphate treatments
Unaffected by high temperatures, permitting a
wide variety of applications
Integral feed cartridge fits standard 10" housings
Translucent cartridge allows simple visual
monitoring of product usage and ensures against
wasteful premature cartridge replacement
Wrap ScaleStick® (SSW-10) is specially
designed to be used with a sediment filter wrap
(SWS-10) to combine sediment filtration and
scale control. The SWS-10 is designed to fit
over and around the Wrap ScaleStick® and is
sold separately
Also available: CWS-10 Carbon Block Filter
Wrap EV9799-06
Housing not included. Order Model A-10 Clear
10” Housing (EV9100-01) separately for
temperatures less than 125°F
Make sure selected housing fits temperature/
pressure conditions
Install vertically with black o-band seal up
Wrap ScaleStick® cartridges are shorter than
standard ScaleStick® cartridges and do not have
the o-band seal. They cannot be installed without
the special filter wraps. Standard ScaleStick®
cartridges cannot be installed into filter wraps
Deliming of equipment prior to application is
recommended, but not required
Inspect ScaleStick® cartridges at least every 6
months
Replace ScaleStick® before Hydroblend™
compound is completely dissolved
Pre-existing equipment scale may come loose and
clog equipment. Remove any loose scale to assure
satisfactory operation
For water-using equipment:
Steamers and Combi-ovens
Ice Machines
Coffee and Espresso Machines
Proofers
EV9799-05
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
