Eureka NEU203 - User Manual

www.eureka.com 5 How to assemble your vacuum cleaner Store accessories on back of vacuum cleaner. Click! Slide handle into top of vacuum cleaner. Push down until it clicks. Push loose end of hose securely onto hose inlet. Put the vacuum cleaner main body in the upright position. Loop hose over hose ...

6 Eureka Customer Service HELPLINE 1-800-282-2886 Handle with wand Dust cup release button Height adjustment knob Washable foam filter Filter screen Crevice tool Power switch Hose retainer Hose Cord outletHose inlet Vacuum cleaner Belt Brushroll How to identify parts of your vacuum cleaner For filte...

www.eureka.com 7 How to use your vacuum cleaner Plug power cord into outlet. Empty dust cup after every use Step on front of the floor nozzle and recline the vacuum back from the handle to vacuum floors. Step on power switch to turn vacuum cleaner on. Step on again to turn off. Turn height adjustmen...

8 Eureka Customer Service HELPLINE 1-800-282-2886 4 5 How to use accessories ! C A U T I O N Upholstery tool – Use for furniture, chairs, sofas and mattresses. • Place vacuum in upright position. • Turn height adjustment knob to highest position. • Pull up on hose connection to release hose end from...

www.eureka.com 9 How to maintain dust cup and filters Dust cup – Empty after each use Press release button and lift off dust cup. Hold dust cup over wastebasket and press lever to release bottom lid. Debris will empty. Click! Close bottom lid until it clicks. Washable dust cup filters – Clean monthl...

10 Eureka Customer Service HELPLINE 1-800-282-2886 How to clear a blockage If vacuum is not cleaning floors, or if no suction at end of hose, check to be sure air path is not blocked. • Press release button and lift off dust cup (Fig. 1). • Empty debris. Hold over wastebasket and press lever to rele...

www.eureka.com 11 How to maintain brushroll • Step on floor nozzle to lower handle. • Turn vacuum face down on floor. • To avoid unnecessary service calls, check brushroll for debris. • Use scissors to clip heavy threads or strings. Make sure vacuum is turned off and power cord is unplugged. ! C A U...

12 Eureka Customer Service HELPLINE 1-800-282-2886 How to replace brushroll or belt • Step on floor nozzle to lower the nozzle. • Use Phillips screwdriver to remove 6 screws from brushroll cover (Fig. 1). Lift off cover. Refer to Fig. 7 for location of screws. • Rotate right end of brushroll and lif...

www.eureka.com 13 Problem solving ! Make sure vacuum is turned off and power cord is unplugged. N O T I C E : Thermal cut-off This vacuum cleaner has a special thermostat that protects the vacuum in case of motor overheating. If the vacuum suddenly shuts off, proceed as follows: 1) Push the power sw...

14 Eureka Customer Service HELPLINE 1-800-282-2886 The Eureka two-year limited warranty Midea America Corp. (“Eureka”), subject to the terms and conditions herein, warrants this vacuum cleaner to be free from defects in material and workmanship for a term of two years from the date of original purch...

16 Eureka Customer Service HELPLINE 1-800-282-2886 Do not return to the store, call Eureka Customer Service HELPLINE 1-800-282-2886 www.eureka.com Eureka stands by our Clean Promise seal. Learn more at www.eureka.com/cleanpromise Owner’s Guide © 2018 Midea America Corp. Printed in China 02155180_WMT...