Emerson SW405- User Manual
Emerson SW405– User Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – Installation of Wall Control; WARNING; General; HOT; LIMITED WARRANTY; authorized service center.
- Page 3 – STANDARD WIRING FOR EXISTING 3-WAY CONTROLS; BLK; Figure 4; Figure 3; NOTES
- Page 4 – Installation of Receiver; Figure 6; IMPORTANT; Figure 7; Trouble Shooting
S
S a
a ff e
e tt y
y II n
n s
s tt rr u
u c
c tt ii o
o n
n s
s
WARNING:
To avoid fire, shock, and serious personal injury, follow all instructions
carefully.
1.
Read your Owner's Manual carefully before installing the Wall Control. Retain Owner's
Manual for future reference.
2.
Before servicing or cleaning the ceiling fan, switch power off at service panel and lock
s e r v i c e p a n e l d i s c o n n e c t i n g m e a n s t o p r e v e n t p o w e r f r o m b e i n g s w i t c h e d o n
accidentally. When the service disconnecting means cannot be locked, securely
fasten a warning device such as a tag, to the service panel.
ADDITIONAL SAFETY INSTRUCTIONS FOR INSTALLATION
1.
To avoid possible electrical shock, be sure electricity is turned off at the main fuse or
circuit breaker box before wiring.
2.
Make certain no bare wires are exposed outside the wire connectors.
3.
All wiring must conform to National and Local Electrical Codes.
4.
Follow the recommended instructions for the proper method of wiring your new Wall
Control. If you feel you do not have enough electrical wiring knowledge or experience,
have your Wall Control installed by a licensed electrician. Any electrical work not
described in this manual should be performed by a licensed electrician.
Ceiling Fan/Light
Wall Control Owner's Manual
Part No. BP7413
Form No. F40BP74130000
Printed in China 01/10
READ AND SAVE THESE INSTRUCTIONS
Model Number
SW405
Air Comfort Products
DIVISION OF EMERSON COMPANY
8100 W. Florissant • St. Louis, MO 63136
• 4-Speed Hard Wired
Wall Control
• Supplied with Receiver
• Supplied with White,
Ivory, and Light
Almond Face Plates
• Includes Light
Dimming Selection
Switch
Model Number
SW406
• 4-Speed Hard Wired
Wall Control
• Single Light
• Supplied with White,
Ivory, and Light
Almond Face Plates
• Use with SW405
(3-way) or SR400
• Includes Light
Dimming Selection
Switch
Part No. F40BP74130000
Form No. BP7413
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
Installation of Wall Control SINGLE-POLE INSTALLATION (Figure 2) 1. D i s c o n n e c t p o w e r a t c i r c u i t b r e a k e r o rremove fuse. 2. Remove faceplate and screws from existingwall control. Pull control out from the wall box.Determine the “hot” wire and the “load” wireand disconnect th...
6. Place wall control into wall box. Screw inplace and install decorator style faceplate(included). 7. Next, install the other wall control into the wallbox containing the load wire. Connect theblack wire of the wall control to the travelerwire(s) already connected to the black wire( i n t h e o t h...
1. After electricity has been turned off at mainfuse box or circuit breaker box, remove theceiling cover from the hanger bracket. 2. Disconnect the supply wiring to the fan byremoving wire connectors. Do not disconnectthe green/bare ground wires. 3. Connect the black supply wire to the receiverblack...
