Emerson SS64- Installation Manual
Emerson SS64– Installation Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Edco SS64 & SS65 Series
Wastewater/Industrial Applications
Power Switching & Controls
For
Business-Critical Continuity
TM
The Edco SS64 and Edco SS65 Series suppressors are designed for the water
and wastewater industr y. These multi-stage hybrid suppressors address
over-voltage transients with gas tube and silicon avalanche technology. In
addition, sneak and fault currents are mitigated with PTC devices which
consist of solid-state resettable fuses. The units are encapsulated in stainless steel pipe
nipples making them suitable for use in severe environments. The Edco SS64
models protect a signal pair and the Edco SS65 models protect a signal pair
plus the cable shield (drain wire).
Maximum Operating Voltage:
28 VDC
Maximum Operating Current:
150 mA
Clamping Voltage (L-G):
36 VDC
Clamping Voltage (L-L):
72 VDC
Peak Surge Current:
10 kA (8x20 uS)
SPD Technology:
GDT, SAD, w/series PTC
Frequency Range:
0 to 20 MHZ
Insertion Loss:
< 0.1 dB at 20 MHz
Series Resistance (per Conductor):
5 Ohm (typical)
Capacitance (Zero Volts Bias):
(L-G) 1200 pf (typical)
(L-L) 600 pf (typical)
Operating Temperature:
-40°C to +85°C
Life Cycle:
400 @ 500 Amps (10x1000 us)
Weight:
.35 lbs
Certifications:
UL 497B
General Technical Specifications
Features
Transient protec tion for low -
volt age signal lines
Sneak/fault current
protec tion
Resett able fusing—PTC s
Differential and common
mode protec tion
Automatic recover y
Encapsulated in st ainless
steel pipe nipples
Protec tion for one pair
(Two wires & shield on SS65)
5 year warrant y
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
