Emerson S5KC- User Manual

Emerson S5KC

Emerson S5KC– User Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.

1 Page 1
2 Page 2
3 Page 3
4 Page 4
5 Page 5
6 Page 6
7 Page 7
8 Page 8
9 Page 9
10 Page 10
11 Page 11
12 Page 12
13 Page 13
14 Page 14
15 Page 15
16 Page 16
17 Page 17
18 Page 18
19 Page 19
20 Page 20
21 Page 21
22 Page 22
23 Page 23
24 Page 24
25 Page 25
26 Page 26
27 Page 27
28 Page 28
29 Page 29
30 Page 30
31 Page 31
32 Page 32
33 Page 33
34 Page 34
35 Page 35
36 Page 36
37 Page 37
38 Page 38
39 Page 39
40 Page 40
41 Page 41
42 Page 42
43 Page 43
44 Page 44
45 Page 45
46 Page 46
47 Page 47
48 Page 48
49 Page 49
50 Page 50
51 Page 51
52 Page 52
53 Page 53
54 Page 54
55 Page 55
56 Page 56
57 Page 57
58 Page 58
59 Page 59
60 Page 60
61 Page 61
62 Page 62
63 Page 63
64 Page 64
65 Page 65
66 Page 66
67 Page 67
68 Page 68
69 Page 69
70 Page 70
71 Page 71
72 Page 72
73 Page 73
74 Page 74
75 Page 75
76 Page 76
77 Page 77
78 Page 78
79 Page 79
80 Page 80
81 Page 81
82 Page 82
83 Page 83
84 Page 84
85 Page 85
86 Page 86
87 Page 87
88 Page 88
89 Page 89
90 Page 90
91 Page 91
92 Page 92
93 Page 93
94 Page 94
95 Page 95
96 Page 96
97 Page 97
98 Page 98
99 Page 99
100 Page 100
Page: / 100

Table of Contents:

  • Page 3 – TABLE OF CONTENTS
  • Page 4 – ii; MultiLink
  • Page 5 – iii; FIGURES
  • Page 6 – iv
  • Page 7 – TABLES
  • Page 9 – SAVE THESE INSTRUCTIONS; Emerson representative immediately.; WARNING; gain access to the internal portions of the SolaHD S5KC.
  • Page 10 – ELECTROMAGNETIC COMPATIBILITY; Information for the Protection of the Environment; UPS SERVICING; Products
  • Page 11 – LOSSARY
  • Page 12 – RODUCT; components and specifications of the SolaHD S5KC UPS.; System Description; Figures 1; through; Table 1; UPS Model Number Digits 1-4
  • Page 13 – Figure 1
  • Page 14 – Figure 3
  • Page 15 – Figure 4
  • Page 16 – Features; SolaHD S5KC UPS; communication ports
  • Page 17 – Operating Principle; The operating principle of the SolaHD S5KC UPS is shown in; Figure 5; Wiring
  • Page 18 – Operating Modes; Normal Mode; recharge time for long backup time applications.; Backup Mode; restoration of the AC utility/mains source.; Auto Restart Mode; inverter to the bypass source.
  • Page 19 – Major Components; UPS Frame; The UPS frames are shown in; Figure 6; In
  • Page 20 – User Interface Module; Figure 7; System Control Module and System Monitor Module; Figure 8; Handle
  • Page 21 – Power Module; The power module is shown in; Figure 9; Battery Module; The battery module is shown in; Figure 10 Battery module appearance; be Off. For any other condition, refer to; NOTE
  • Page 22 – Charger Module; shows the charger module.; Figure 11 Appearance of the charger module; connected battery system or connected equipment.; Figure 12 External battery cabinet; Green Status LED
  • Page 23 – NSTALLATION; Unpacking Inspection; send a copy to your Emerson; Installation Environment; The tools required to properly set up your UPS are listed below:; Installation Site; Figure 13 Front and rear installation clearances
  • Page 24 – Unloading the UPS; installation location.; Figure 14 Remove the mounting brackets; Sola S5KC
  • Page 25 – Mechanical Installation; Tower Installation; Figure 16 Adjust the leveling feet; mounting bolts removed from the pallet. Refer
  • Page 26 – Rack Installation; support the weight of the SolaHD S5KC.; Figure 18 Install cage nuts; bottom of the rack, as shown in; Figure 19 Install the tray; Detail A; Detail B
  • Page 27 – Figure 20 Install the guide rails; Mounting Slot; Bracket
  • Page 28 – Figure 22 Push the UPS frame into the rack
  • Page 29 – position on the lower front part of the UPS frame; Figure 24 Install the metal plate; The installation is complete, as shown in; Figure 25 Installation completed; Detail Area
  • Page 30 – Module Installation; the steps below to reinsert them properly.; Installing Power Module, Battery Module and Charger Module; Lift module to appropriate bay, resting end of module on bay shelf.
  • Page 31 – Figure 27 Lever and fastener; Locking Lever
  • Page 32 – Installing System Control and System Monitor Modules; NOTICE; remove power from the load. Replace these modules one at a time.; Figure 28 Remove large display bezel and user interface module; firmly to ensure that the module is fully inserted, as shown in; Figure 29 Insert the System Control and System Monitor module; Large Display Bezel
  • Page 33 – Replace the LCD module and display bezel.; Cable Connection; Refer to the unit model number in; to determine which instructions to use for installation.; Table 2; Frame Type; Lever; Before Pressing
  • Page 34 – Transformer-Free UPS Cable Connection; Table 3; Table 4
  • Page 35 – panel of the UPS (see; Figure 32 Connection in single-phase input
  • Page 36 – Transformer-Based UPS Cable Connection; and; Table 7; based upon the UPS rating and; Table 5; recommends that the AC input supply be; Table 6
  • Page 37 – Configuring the Bypass Voltage; Table 9; for
  • Page 38 – Configuring the Neutral/Earth Jumper; Figure 36 Configuring the neutral/earth jumper; Connecting Cables; To connect the cable:; Figure 37 Knockouts; With Transformer
  • Page 39 – Refer to; in
  • Page 40 – Transformer-Free UPS—Dual Inverter Frames; Figure 39 Knockouts
  • Page 41 – Figure 40 Secure cables on cable bridges; Figure 41 Wiring connections; Cable; OUTPUT
  • Page 42 – Connecting External Battery Cabinet; EBC frame behind the bottom two bezels.
  • Page 43 – external battery cabinets, as shown in
  • Page 44 – Figure 44 Battery screen; both have the locking levers in the locked position.; Connecting Integrated Power Output Distribution (POD); EBC DIP switch settings; DIP Switch Setting
  • Page 45 – Steps 1; Commissioning/Startup Procedures; This is the breaker located near the POD port.; should not be used if the UPS output voltage is set to 220/127V.; voltage and load ratings before energizing the load.
  • Page 46 – POD breakers are closed.; power must be present to restart the UPS system.
  • Page 47 – OMMUNICATION; IntelliSlot Ports; Figure 45 IntelliSlot communication port location; IntelliSlot
  • Page 48 – communication to four servers for use with MultiLink software.; IntelliSlot EBC Card; external matching battery cabinets.; Dry Contact Ports; The UPS provides dry contact ports. See; for location and; Figure 46 Pin layout of the dry contacts; shows the pin definition of each dry contact port.; Battery Mode Dry Contact; Pin definition of dry contact port; Position
  • Page 49 – Battery Mode Shut Down; Figure 47 REPO connector pin layout; REPO normally open nodes, shorting pins 9 and 10, REPO is triggered
  • Page 50 – cause signal noise, possibly causing the system to shut down.; Long Run Time (LRT) Battery Temperature Probe Terminals; temperature sensor. See; Figure 49 Pin layout of the temperature sensor terminal; USB Port; support or in conjunction with MultiLink
  • Page 51 – be configured for use without the USB cable when the IntelliSlot; Figure 50 LCD port; LCD Port
  • Page 52 – PERATION; Overview; display panel, refer to; Figure 51 Operation and display panel; Mimic LEDs; LEDs are given in; LED descriptions
  • Page 53 – Audible Alarms; Figure 52 User interface module layout
  • Page 54 – LCD Screen; Startup Screen; which lasts for 15 seconds as shown in; Figure 53 Startup screen; Main Screen; and keyboard window, as shown in; Figure 54 Main screen; System Information Window; for the detailed description.; Item description of system information window; SolaHD S5KC; Industrial Automation
  • Page 55 – Menu Window and Data Window; for the menu and data descriptions.; Item description of menu window and data window; Menu Name
  • Page 58 – Keyboard Window; Function descriptions of menu buttons; Button
  • Page 59 – Default Screen/Screen Saver; Figure 55 Default screen/screen saver; LCD Screen Views; reference to the Output screen.; AC Mains Screen; Figure 56 Mains screen
  • Page 60 – Battery Screen; Figure 57 Battery screens; Output Screen; The main screen is the output screen by default, as shown in; Figure 58 Output screen; First Screen
  • Page 61 – Load Screen; Figure 59 Load screen; level and crest factor.; UPS Information Screen; Figure 60 UPS info screen; battery module (if the modules are installed and are online).
  • Page 62 – Redundancy Screen; shown in; Figure 61 Redundancy screen; system contains a redundant module or not.
  • Page 63 – Settings Screen; Figure 62 Settings screens; primary functions to the secondary functions, as shown in; Entering a Password; the F3 button to enter the correct number.; SolaHD S 5KC Series; Fifth Screen
  • Page 64 – Setting or Changing a Parameter Setting; Battery Setting Screen; Figure 63 Battery settings screen; Language Selection Screen; Figure 64 Language selection screen; The languages are displayed in their alphabet.
  • Page 65 – Alarms Screen; Figure 65 Alarms screen; Records Screen; Figure 66 Records screen
  • Page 66 – displayed, as shown in; Figure 67 Module replacement screen; Prompt Window; a prompt window will pop up, as shown in; Figure 68 Example of prompt window; Module Replacement Screen
  • Page 67 – Information and actions required for the prompt window
  • Page 68 – ROUBLESHOOTING; Active Alarms; possible alarm messages are displayed in; Alarm message list; Alarm Message
  • Page 71 – Module Troubleshooting; indicate the module operating state.; Figure 69 Module LED location
  • Page 72 – Module Replacement; Removing Modules; power, battery or charger module
  • Page 73 – Replacing the User Interface Module; to do so may cause unit to tip over and cause serious injury.
  • Page 74 – Figure 72 Replacing the user interface module
  • Page 75 – AINTENANCE; scheduled maintenance and procedures for cleaning fan filters.; Proper Care; your local SolaHD service representative for service.; Scheduled Maintenance; Top Filter; and clean the filters as described above.; Figure 73 Replace/clean the top filter; Mounting
  • Page 76 – Bezel Filter; Figure 74 Replace/clean the bezel filter; Bottom Fan Filter—Transformer-Based Frames Only; , and clean the filters as; Figure 75 Replace/clean the bottom fan filter; Bottom Fan Filters
  • Page 77 – PECIFICATIONS; SolaHD S5KC specifications
  • Page 78 – No Transformer
  • Page 79 – SolaHD S5KC external battery cabinet specifications; Estimated Battery Run Times
  • Page 80 – Tables for UPS Where Model Number Digits 1-4 are S5KA
  • Page 83 – Tables for UPS Model Number Where Digits 1-4 are S5KB
  • Page 86 – Tables for UPS model number digits 1-4 are S5KC
  • Page 89 – Tables for UPS Model Number Where Digits 1-4 are S5KD
  • Page 92 – Tables for UPS Model Number Where Digits 1-4 are S5KE
  • Page 95 – Tables for UPS Model Number Where Digits 1-4 are S5KF
Loading the manual

S5KC

™

Series

User Manual – 5-20kVA Modular UPS

"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.

Summary

Page 3 - TABLE OF CONTENTS

i TABLE OF CONTENTS I MPORTANT S AFETY I NSTRUCTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 SAVE THESE INSTRUCTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 G LOSSARY OF S YMBOLS . ....

Page 4 - ii; MultiLink

ii 3.4 Long Run Time (LRT) Battery Temperature Probe Terminals . . . . . . . . . . . . . . . . . . . . . . . 42 3.5 USB Port . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42 3.6 MultiLink ® . . . . . . . . . . . . ...

Page 5 - iii; FIGURES

iii 7.2 Estimated Battery Run Times . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75 7.2.1 Tables for UPS Model Number Where Digits 1-4 are S5KB . . . . . . . . . . . . . . . . . . . . . . . . . . 75 7.3 Estimated Battery Run Times . . . . . . . . ...

Other Emerson Models