Emerson Remote Monitoring Panel - Manual

Table of Contents:

• Page 3 – TABLE OF CONTENTS
• Page 4 – ii; FIGURES; Figure 1
• Page 5 – SAVE THESE INSTRUCTIONS; ELECTROMAGNETIC COMPATIBILITY; Conformity and Standards
• Page 6 – Introduction; NTRODUCTION; Description of Menu Items; HELP
• Page 7 – Figure 2; UPS Room
• Page 8 – Installation; NSTALLATION; Preliminary checks; Figure 3; Cable Specifications; tions in; Table 2; Item
• Page 9 – Figure 4; Mounting the RMP on Drywall; Figure 5; Shield
• Page 10 – Electrical connections; Connect the power and communication cables to the RMP as shown in; Figure 6
• Page 11 – Figure 7; board is inside the UPS front door.
• Page 12 – Operation; PERATION; Startup and Reset; Figure 8; . The NX screen will display the same screen.; Output
• Page 13 – Figure 10 UPS and RMP firmware are compatible screen; When the Silence On/Off button is pushed, the relevant screen in; Figure 11 Silence On/Off screens; to report communication with UPS failed.; NOTE; Panel. It will not silence the audible alarm in the UPS.; RMP Silence On
• Page 14 – Figure 12 Communication with UPS failed; to report “Firmware is not Compatible with UPS.”; Figure 13 Firmware not compatible with UPS screen; from the UPS, the RMP will display the screen shown in
• Page 15 – LED Mimic Power Flow; Buzzer; UPS activity is accompanied by the following sounds
• Page 16 – Direct Access Push Buttons—Keys; The NX Remote Monitoring Panel has one direct access push button:; LCD Monitor and Menu Keys; Figure 14 Graphic LCD monitor windows and keypad; above, pressing F1 moves the cursor (resting in “OUTPUT”) from the; Menu key Icons and their meaning; Key; ESC; Window
• Page 17 – The summary menu tree is shown in; Figure 15 Menu tree
• Page 18 – Detailed Description of Menu Items; its configuration and its status.; Menu and Data Window; Settings menu; Descriptions of RMP menus and data window items; Menu
• Page 19 – Current Record Window; for a complete list of supported status messages.; Descriptions of RMP menus and data window items (continued)
• Page 20 – Status and Event Messages; Refer to; RMP messages; Message
• Page 24 – tions and / or to require user confirmation of a command.; Dynamic Energy Flow Chart and UPS Help Screen; this screen and the main screen.; The items in; Prompt windows, meanings controlled at UPS only; Prompt windows, meanings controlled at RMP; Prompt
• Page 25 – Figure 16 Help screen; Default screen saver; Figure 17 Default screen
• Page 26 – Technical Specifications; ECHNICAL; Mechanical specifications
• Page 27 – Agency and Certifications; Safety Standard; of emission and immunity standards as detailed in; Electromagnetic interference (EMI)—emission limits
• Page 28 – AC Power