Emerson NetSure 211 C45- User Manual
Emerson NetSure 211 C45– User Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – Safety Precautions; Electrical Safety; I. Hazardous voltage; Danger; Dange r; Danger; In high voltage and AC operation, specialized tools must be used.; Dange r; Danger; well earthed in time to avoid damage by lightning strikes.
- Page 3 – Note; Use insulated tools.; BLVD; The method of disabling BLVD is:; W ar n in g
- Page 4 – Others; Warning; Please verify the cable labels before connection.
- Page 5 – Contents
- Page 7 – Chapter 1 Overview; embedded power supply system (abbreviated as; Model Description; The model description of the system is given in Figure 1-1.; Composition And Configuration; appearances of the two systems are shown in Figure 1-2 and Figure 1-3.
- Page 8 – The system has wide AC input voltage range: 90Vac ~ 290Vac.
- Page 9 – Chapter 2 Installation Instruction; Safety Regulations; Unpacking inspection
- Page 10 – Cable specifications of NetSure 211 C45-S2 power supply system
- Page 11 – Mechanical Installation
- Page 13 – Electrical Installation; Switch off all MCBs and fuses before the electrical connection.
- Page 17 – Chapter 3 Installation Testing; Installation Check And Startup; Check the system according to the following items listed below.; Installation check
- Page 18 – Basic Settings; SCU + Series Monitoring Module User Manual; Alarm Check And System Operation Status Check; Alarm check
- Page 19 – System operation status check; through the monitoring module.
- Page 20 – Chapter 4 Alarm Handling; Handling Alarms
- Page 21 – Handling Rectifier Fault; Handling indicator fault
- Page 22 – Replacing rectifier fan; Unplug the power cable of the fan and remove the fan.; Replacing rectifier; Take a new rectifier and check it for any damage.
- Page 24 – Appendix 1 Technical Data
- Page 26 – Appendix 2 Wiring Diagram
- Page 28 – Appendix 3 Glossary
NetSure 211 C45 Embedded Power
Supply System
User Manual
Version V1.0
Revision date September 15, 2009
BOM 31012178
Emerson Network Power provides customers with
technical support. Users may contact the nearest
Emerson local sales office or service center.
Copyright © 2009 by Emerson Network Power
Co., Ltd.
All rights reserved. The contents in this document
are subject to change without notice.
Emerson Network Power Co., Ltd.
Address: No.1 Kefa Rd., Science & Industry Park,
Nanshan District 518057, Shenzhen China
Homepage: www.emersonnetworkpower.com.cn
E-mail: [email protected]
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
Safety Precautions To reduce the chance of accident, please read the safety precautions very carefully before operation. The "Caution, Note, Warning, Danger" in this book and on the product do not represent all the safety points to be observed, and are only supplement to various safety point...
IV. ESD Note The static electricity generated by the human body will damage the static sensitive elements on PCBs, such as large-scale ICs. Before touching any plug-in board, PCB or IC chip, ESD wrist strap must be worn to prevent body static from damaging the sensitive components. The other end of ...
Others I. Safety W ar n in g Noti ce Note When replacing power input fuses of monitoring module and power distribution units, use the same type fuses to meet the safety requirement. II. Sharp object Warning When moving equipment by hand, wear protective gloves to avoid injury by sharp object. III. P...
