Page 2 - IMPORTANT SAFETY INSTRUCTIONS; C A U T I O N
1 TO PREVENT FIRE OR SHOCK HAZARD, DO NOT USE THIS PLUG WITH ANEXTENSION CORD, RECEPTACLE OR OTHER OUTLET UNLESS THE BLADESCAN BE FULLY INSERTED TO PREVENT BLADE EXPOSURE. TO PREVENT FIREOR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. IMPORTANT SAFETY INSTRUCTIONS 1.) Read these i...
Page 3 - For Your iPod; TOUCHLESS
2 … … … . For Your iPod ® Thank you for purchasing this Digital Tuning Stereo Clock Radio with iPod ® Docking Station and SmartSet ® Auto Time Setting System from Emerson Research. This compact system has been designed with a powerful amplifier and matching high fidelity speakers to produce the kind...
Page 4 - iPod
3 iPod ® is a trademark of Apple Computer Inc., registered in the U.S. and other countries. We have taken great care to make sure that every component in your system was in perfect working order when the system left our factory. If you experience any problems with the set up or operation of this sys...
Page 5 - I M P O R TA N T N O T E S; FC C In fo rm at io n
4 I M P O R TA N T N O T E S • O p e ra t e c o nt r o ls and swit ch es as described in the manual. • Before turning on the power, m ake c er ta in t ha t t he AC p o we r c or d is properly installed. • W hen moving the set, be sure to first disconnect the AC power cord. • Avoid installing this un...
Page 6 - P R E PA R AT I O N F O R U S E; Unpacking and Set Up; NOTE; Protect Your Furniture
5 P R E PA R AT I O N F O R U S E Unpacking and Set Up • This carton contains the main unit, the remote control hand set, iPod ® Support Bracket and 5 different iPod ® adapters so that you can securely connect any dockable iPod ® to the top mounted docking station. Remove all of the components from ...
Page 7 - Battery Back-up System; Power Source; T he syst em has a pola rized AC p lug with one wid e b lad e an d o ne; AC Plug
6 Battery Back-up System This unit includes a battery back up system powered by a built-in, long life CR2430 lithium battery. The battery maintains the time and alarm settings, the Sleep and Nap timer settings, and the preset station tuner memories as well, whenever the power is interrupted. If the ...
Page 8 - L O C AT I O N O F C O N T R O L S A N D I N D I C AT O R S
7 Front Panel Top Panel 1 2 3 2 5 6 7 8 9 10 12 13 14 15 16 17 18 19 20 21 22 23 24 L O C AT I O N O F C O N T R O L S A N D I N D I C AT O R S 4 11 iC200_NCab050307.p65 3/5/2007, 11:29 7
Page 11 - L E D D i s p l a y; Battery Low Indicator.
1 0 L E D D i s p l a y 1 2 3 13 12 11 10 9 8 4 5 7 6 1.) MUTE Indicator. 2.) AM Indicator. 3.) Day Of Week Indicators. 4.) SLP (Sleep) Timer Indicator. 5.) NAP Timer Indicator. 6.) Time, Year, Month/date, Volume Level (00-63), Radio Frequencies Display. 7.) AL2 (Alarm 2) Indicator. 8.) Battery Low ...
Page 12 - Remote Control
1 1 Remote Control 1 2 3 4 5 6 7 8 9 10 12 13 11 1.) Preset Button. 2.) Preset Button. 3.) Tuning/Skip Reverse Button. 4.) Power “On/Off” Button. 5.) Infrared Transmitter. 6.) Function Button. 7.) Volume + Button. 8.) Tuning/Skip Forward Button. 9.) Volume – Button. 10.) Band Button. 11.) Alarm Stop...
Page 13 - Installing The Remote Control Batteries; AAA; Battery Precautions
1 2 Installing The Remote Control Batteries The remote control requires two “AAA” batteries, not included. We recommend that you use a well known brand of alkaline batteries for longest life and best performance. O p e n t h e r e m o t e c o n t r o l b a t t e r y compartment by sliding the batter...
Page 14 - O P E R AT I N G I N S T R U C T I O N S; The FM antenna is built into the power cord.; Se tt in g Th e Tim e, T he Fi rs t Time; The first time you connect your new SmartSet; Time Zone
1 3 O P E R AT I N G I N S T R U C T I O N S • Make sure that you have extended the AC power cord to its full length. The FM antenna is built into the power cord. • Make sure that you have installed two fresh “AAA” alkaline batteries in the remote control handset. Se tt in g Th e Tim e, T he Fi rs t...
Page 15 - D at e Di sp la y; Yea r Di sp la y; Time
1 4 Hold the Time Zone button and then press either the Tuning/Skip (Clock/Time) or buttons until your own time zone appears on the display, then release the buttons. The clock display will change to the correct time in the time zone you selected. The clock will always return to the correct time in ...
Page 16 - Da yl ig ht Sa vi ng and Leap Yea r Adjus tm en ts; t h e SmartSet; St a r t o f D a yl i g h t S a v i n g T im e :; At “2 : 0 0 AM ” o n t h e 2 n d Su n d a y in Ma r c h , t h e c lo c k will a u t o m a t ic a lly; En d o f D a yl i g h t Sa v i n g T im e :
1 5 Da yl ig ht Sa vi ng and Leap Yea r Adjus tm en ts All D a ylig h t Savin g an d L eap Yea r ad j us t m e n ts a r e m ad e au t o m a tic a lly b y t h e SmartSet ® in t e r na l c o m p u t e r as fo llo ws : • St a r t o f D a yl i g h t S a v i n g T im e : At “2 : 0 0 AM ” o n t h e 2 n d ...
Page 17 - Manu al Tim e Adjus tm en ts
1 6 Manu al Tim e Adjus tm en ts Some people like to set their clocks 5 to 10 minutes fast to make sure that they will always be on time. Even though the SmartSet ® sets the time by itself, you still have the option of adjusting the time manually if you wish. To manually adjust the time display depr...
Page 18 - Ad ju st in g Th e Wak e Up Tim es
1 7 Ad ju st in g Th e Wak e Up Tim es Your Sm artSet ® clock radio has two separate alarms that can be set and used independently. You may use the alarms to wake two people at different times, or you may use one alarm for weekdays and the other for weekend wake up times. The procedure for adjusting...
Page 20 - Using The Remote Control
1 9 Using The Remote Control The remote control unit supplied with this system allows you to perform the following operations: • Switch the system ‘On’ and ‘Off’. • Select the desired function (i Pod ® / AUX / TUNER ). • Select the AM or FM bands. • Start and pause iPod ® playback or shut the iPod ®...
Page 21 - Listening To The Radio
2 0 Listening To The Radio 1.) Press the Power button on the top panel or remote control to turn the system ‘On. If necessary press the Function button on the top panel or remote control to select the Tuner function. The TUNER indicator appears and the display changes from time to radio frequency. T...
Page 23 - Presetting Stations In The Tuner Memory
2 2 Presetting Stations In The Tuner Memory You can store a total of 20 stations, 10 FM and 10AM, in the tuner memory for easy recall at any time. 1.) U s i n g e i t h e r t h e A u t o m a t i c or Manual Tuning method described above, tune to the first station you wish to store in the tuner memor...
Page 24 - R e c a l l i n g P r e s e t S t a t i o n s
2 3 7.) Press the Band button to switch to the AM band and repeat the above procedure to store up to 10 AM stations in the tuner memory. NOTES: • The FM memories are numbered “ F 1 ” through “ F 10 ”. The AM memories are numbered “ A 1 ” through “ A 10 ”. • After you press the Memory button the firs...
Page 25 - the best reception for your favorite AM stations.
2 4 Antenna Information FM : The FM antenna is built in the AC power cord. You may have to extend and vary the direction of the AC power cord until you find the position that provides the best reception. AM : The AM bar antenna is inside the cabinet of the main unit. You may need to change the posit...
Page 27 - To prevent distortion during iPod; Power; of this system is ‘Off’ or ‘On’.
2 6 Listening To Your “Dockable” iPod ® / Charging The Battery IMPORTANT! To prevent distortion during iPod ® playback you should go to the Main Menu of your iPod ® , select the Settings Menu page, select the EQ Setting, and make sure that the EQ function is set to “Off”. (Main Menu > Settings Me...
Page 30 - Function
2 9 NOTE : If the Power of this system is ‘On’ and the iPod function is a l r e a d y s e l e c t e d t h e n y o u r i P o d ® w i l l b e g i n t o p l a y a s s o o n a s i t i s connected to the dock, as long as the iPod ® HOLD switch is ‘Off’. If your iPod ® enters the Pause mode when you conne...
Page 31 - Aux
3 0 Connecting and Playing A 1G (First Generation) iPod ® Shuffle/ Charging The Battery The docking station of this system includes an Apple USB connector specifically designed for the 1G (First Generation) iPod ® Shuffle with direct USB connector. NOTE: If you have a new 2G (Second Generation) iPod...
Page 33 - Al ar m Ope ra ti on; Wake To Radio
3 2 Al ar m Ope ra ti on The dual alarm s in this system give you the option of waking to the radio, an electronic buzzer tone, or even to your iPod ® . NOTE : You cannot wake to the iPod ® Shuffle. You may also program one or both of the alarms for weekdays only, weekends only, or everyday operatio...
Page 34 - Wake To Buzzer; Note
3 3 Wake To Buzzer Note : Alarm 1 and Alarm 2 have different buzzer sounds. Alarm 1 is a “single beep” sound. Alarm 2 is a “double beep” sound. You will be able to tell which alarm is going off by the sound that it makes. 1.) Slide the Alarm 1 and/or Alarm 2 selector switches, located on the left si...
Page 35 - Wake To Your iPod
3 4 Wake To Your iPod ® NOTE : You can only wake to the “Dockable” iPod ® . You cannot wake to the iPod ® Shuffle. 1.) Connect your iPod ® to the docking station as usual, start playback, select the song that you would like to play at the wake up time and the desired volume level, then press the Pow...
Page 36 - To Cancel The Alarms; Alarm 1; selector switches to their “; Off
3 5 To Cancel The Alarms To cancel the alarm completely so they do not come on at all, slide the appropriate Alarm 1 and/or Alarm 2 selector switches to their “ Off ”positions. iC200_NCab050307.p65 3/5/2007, 11:29 35
Page 37 - SNOOZE Alarm / “TOUCHLESS” SNOOZE; SNOOZE
3 6 SNOOZE Alarm / “TOUCHLESS” SNOOZE When the alarms turn on in the morning you can activate the SNOOZE control to catch a few minutes extra sleep. The Snooze function stops the alarm for 9 minutes and then turns the alarm ‘On’ again. There are three ways to activate the Snooze control: By touching...
Page 38 - Sleep Timer; Volume
3 7 Sleep Timer The Sleep Timer allows you to operate the radio or iPod ® for up to 99 minutes while you are falling asleep and then shuts the power off automatically. 1.) Turn the system ‘On’ and operate the radio or iPod ® as usual. Adjust the Volume control to the desired level for falling asleep...
Page 39 - Dimmer Control
3 8 Nap Timer (Buzzer Alarm Only) The Nap timer function will wake you to the buzzer alarm after a nap of up to 99 minutes without the need to change your regular Alarm 1 or Alarm 2 settings. 1.) If the system is playing, shut the power ‘Off’. 2.) Press the Nap button on the top panel. The display w...
Page 41 - Mu te C ont ro l (Remo te Co nt rol O nl y)
4 0 Phones (Stereo Headphone) Jack This system includes a stereo headphone jack for private listening without disturbing others. The Phones jack is located on the back panel. The built in speakers automatically shut off when headphones are connected to the Phones jack. IMPORTANT: Before connecting y...
Page 42 - Ch an gi ng Th e Li th ium B at te ry; IMPORTANT; BE CA RE FUL NO T TO L O S E T HI S SM ALL S CRE W!
4 1 Ch an gi ng Th e Li th ium B at te ry Like all batteries, eventually the built in lithium battery will need to be replaced. A num ber of factors, such as, the length of time between the date the radio was manufactured and the date you plugged it in for the first time determine the amount of time...
Page 44 - Rese tt ing T he Cl oc k Aft er A Tota l Memor y Lo ss
4 3 Rese tt ing T he Cl oc k Aft er A Tota l Memor y Lo ss If you do not change the built in lithium battery within a reasonable period of time after you see the flashing “ ” warning indicator, the lithium battery may become exhausted and will no longer be able to supply back up power to the SmartSe...
Page 45 - mode settings, and sleep timer settings as well.
4 4 4.) Depress the Month/date button. The display will change from ‘time’ to ‘month/ date’ (mm/dd). W hile holding the Month/date button, press the Tuning/Skip button to set the display to the correct Month and Date. The Day indicator will change automatically as you adjust the month/date settings....
Page 46 - C A R E A N D M A I N T E N A N C E; Ca re O f Cabi ne ts; Li th iu m Ba tt ery P reca ut io n s; physician immediately.
4 5 C A R E A N D M A I N T E N A N C E Ca re O f Cabi ne ts If the cabinet becomes dusty, wipe it with a soft cloth. If the cabinet becomessmudged or dirty, clean it with a soft, slightly dampened cloth. Never allowwater or any liquid to get inside the cabinet. Never use any abrasive cleaners or cl...
Page 47 - L IM IT ED WAR RA NT Y; of your proof of purchase. Send your unit to:; M o d e l N u m b e r : i C 2 0 0
4 6 L IM IT ED WAR RA NT Y Emerson Radio Corp. warrants manufacturing defects in original material, including original parts and workmanship, under normal use and conditions, for a period of ninety (90) days from the date of original purchase in the U.S. With your dated proof of purchase, we will pr...
