Emerson Fisher 1B- Installation Manual
Emerson Fisher 1B– Installation Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – Instruction Manual; B Actuator; Description; Installation; WARNING
- Page 3 – Adjustments
- Page 4 – Maintenance
- Page 5 – Parts Ordering; Parts List
www.Fisher.com
Fisher
r
1B and 1BR Constant‐Pressure Pump
Governor Actuators
Figure 1. Fisher 1B Actuator on Direct‐Acting easy‐e™ Valve
W2232‐1
Introduction
Scope of Manual
This instruction manual provides information on installation, adjustment, maintenance, and parts ordering for the
Fisher 1B pump governor actuator. Refer to separate instruction manuals for information about the valve and other
accessories used with these actuators.
Do not install, operate, or maintain a 1B pump governor actuator without being fully trained and qualified in valve,
actuator, and accessory installation, operation, and maintenance. To avoid personal injury or property damage, it is
important to carefully read, understand, and follow all the contents of this manual, including all safety cautions and
Instruction Manual
D100639X012
1B Actuator
April 2011
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
Instruction Manual D100639X012 1B Actuator April 2011 2 warnings. If you have any questions about these instructions, contact your Emerson Process Management sales officebefore proceeding. Description The 1B pump governor actuator (figure 1) is used to maintain a constant discharge pressure on steam...
Instruction Manual D100639X012 1B Actuator April 2011 3 Refer to figure 2. 1. Using good piping procedure install the governor with flow in the direction of the arrow cast on the valve body. 2. Run a 1/4 inch control line from the top of the governor to the side or top of the pump discharge line, ab...
Instruction Manual D100639X012 1B Actuator April 2011 4 Pressure pulsation in the discharge line can be minimized by slightly closing the needle valve in the control line. Nevercompletely close the needle valve while the pump governor is in operation. Maintenance Actuator parts are subject to normal...
