Page 2 - CAUTION; IMPORTANT SAFEGUARDS
1.Read instructions- All the safety and operating instructions should be read before the appliance is operated. 2.Retain Instructions- The safety and operating instructions should be retained for future reference. 3.Heed Warnings -All warnings on the appliance and in the operating instructions shoul...
Page 4 - PRECAUTIONS
- 4 - EN 1B15 RADIO-TV INTERFERENCE This equipment has been tested and found to com-ply with the limits for a Class B digital device, pur-suant to Part 15 of the FCC Rules. These limits aredesigned to provide reasonable protection againstharmful interference in a residential installation.This equipm...
Page 5 - A NOTE ABOUT RECYCLING; QUICK; SYMBOLS USED IN THIS MANUAL
- 5 - EN 1C29 AVOID THE HAZARDS OF ELECTRICAL SHOCK AND FIRE LOCATION For safe operation and satisfactory performance ofyour unit, keep the following in mind when selectinga place for its installation: • Shield it from direct sunlight and keep it away fromsources of intense heat. • Avoid dusty or hu...
Page 6 - TABLE OF CONTENTS
- 6 - EN 1C29 TABLE OF CONTENTS C IMPORTANT SAFEGUARDS . . .2, 3 C PRECAUTIONS . . . . . . . . . . . . . . . .4 LOCATION . . . . . . . . . . . . . . . . . . .5 AVOID THE HAZARDS OF ELECTRICAL SHOCK AND FIRE .5 WARNING . . . . . . . . . . . . . . . . . . . .5 SYMBOLS USED IN THIS MANUAL . . . . . . ....
Page 7 - FEATURES
- 7 - EN 1C29 • Hi-Fi system– The Hi-Fi stereo recording system offers you excellent sound quality with a dynamicrange of 80dB, frequency response from 20Hz to20kHz and 0.005% wow and flutter. • Rotary 4-head Record/Playback System– Four heads ensure excellent picture quality and special effects pla...
Page 8 - DVD Mode
- 8 - EN 1C29 ¡ Dolby Digital sound This unit can handle Dolby Digital surround soundhaving 5.1 channels when connected to a DolbyDigital decoder . ¡ Still/fast/slow/step playback Various playback modes are available including stillpictures, fast forward/reverse, slow motion and stepframes. ¡ Random...
Page 9 - OPERATING CONTROLS AND FUNCTIONS; DVD buttons
- 9 - EN 1C29 OPERATING CONTROLS AND FUNCTIONS 5. STOP Button [TV/VCR P.26 / DVD P.37] Stops operation of the disc. (front panel)Stops operation of the disc or tape contents.(remote control) 6. OPEN/CLOSE Button [DVD P.37] Press to insert discs into or remove them from thetray. 7. Disc loading tray ...
Page 11 - PREPARATION FOR USE; Automatic Timer Recording.; VHF/UHF SEPARATE ANTENNAS; ANTENNA/CABLE CONNECTION; or
- 11 - EN 1C29 CABLE WITH CONVERTER/DESCRAMBLER BOX OR SATELLITEBOX If your cable service supplies you with a converterbox or if you use a satellite system, you can use thebasic connection shown in the illustration.By using this connection you can also record scram-bled channels. However, channel se...
Page 12 - AUX; Note to CATV system installer:; CONNECTING TO EXTERNAL
- 12 - EN 1C29 TO RECORD A SCRAMBLED/UNSCRAM-BLED CHANNEL 1. Set the unit’s channel selector to the output channel of the Cable Converter Box or Satellite Box (Ex.CH3). 2.Select the channel to record from your Cable Converter Box or Satellite Box. INSTALLING THE BATTERIES 1)Open the battery compartm...
Page 14 - CONNECTING TO A DOLBY DIGITAL DECODER (for DVD)
- 14 - EN 1C29 ANT. AUDIO OUT COAXIAL Front speaker (left) Center speaker Front speaker (right) Surround speaker (left) Surround speaker (right) Subwoofer To DIGITAL AUDIO OUT(PCM/BITSTREAM)COAXIAL jack To COAXIAL DIGITAL AUDIO INPUT jack Dolby Digital decoder [Fig. 7] CONNECTING TO A DOLBY DIGITAL ...
Page 15 - SET UP FOR USE; SELECTING THE LANGUAGE; MANUAL CLOCK SETTING; In the example below, the clock is to be set to:; CLOCK SET UP
- 15 - EN 1C29 SET UP FOR USE TV/VCR SECTION 1 Plug in the power cord Plug the unit’s power cord into a standardAC outlet. NOTE: • If any digits appear in the corner of thescreen, press the POWER button without unplug-ging the power cord. Make sure ... • Press the SELECT button to select TV/VCR mode...
Page 18 - CHANNEL SET UP
- 18 - EN 1C29 CHANNEL SET UP Make sure ... • Press the POWER button to turn on the unit. 1 Select “CHANNEL SET UP” Press the SETUP button on theremote control.Press the Arrow button K or L to point to “CHANNEL SET UP”.Then press the ENTER button. 2 Begin auto ch programming Press the Arrow button K...
Page 19 - TV OPERATION; DEGAUSSING
- 19 - EN 1C29 TV OPERATION DEGAUSSING Magnetism from nearby appliances and speakersmight affect the color of the TV picture. If this happens, move this unit away from the appli-ance. If the color is still not correct, unplug thepower cord, then plug it in again 30 minutes later orso. TV/VCR WATCHIN...
Page 20 - CLOSED CAPTION SYSTEM; Select “CAPTION”
- 20 - EN 1C29 CLOSED CAPTION SYSTEM You can view specially labeled (cc) TV programs,movies, news and pre-recorded tapes with either adialogue caption or text display. CAPTION mode: By choosing the caption mode, you can watch dramas, movies and news while captioningthe dialogues and the contents of ...
Page 21 - V-CHIP SET UP SUB RATINGS
- 21 - EN 1C29 5 Exit the V-Chip setting mode Press the SETUP button on the remote control toexit the screen. V-CHIP SET UP Make sure ... • The unit is turned on. 1 Select “V-CHIP SET UP” Press the SETUP button on theremote control.Press the Arrow button K or L to select “V-CHIP SET UP”.Then press t...
Page 22 - MPAA RATING SET UP; Selection; CHANGE ACCESS CODE
- 22 - EN 1C29 CHANGING V-CHIP BLOCKED PRO-GRAMMING Note: To change the rating, the TV must be turned to a station that is not protected. If the (PROTECTED)appears on the screen, please change the channel to astation that is not protected.1)Follow steps [1] to [2].2)Press the Arrow button K or L to ...
Page 23 - CHECKING THE SELECTED MTS MODE; MTS RECORDING/MONITOR MODE; SAP
- 23 - EN 1C29 MTS (Multi-Channel Television sound) SYSTEM You can record or listen to a program in MTS stereo. CHECKING THE SELECTED MTS MODE When you play a VHS tape or receive a broadcast onthe unit’s tuner channel you are watching, the statusshown below will appear when you press the DIS-PLAY bu...
Page 24 - SELECTING THE MTS SYSTEM; TO SELECT HIFI MODE
- 24 - EN 1C29 SELECTING THE MTS SYSTEM Make sure ... • The unit is turned on. TO SELECT HIFI MODE 1 Select “USER’S SET UP” Press the SETUP button on theremote control.Press the Arrow button K or L to point to “USER’S SET UP”. Then press the ENTER button. 2 Select “VCR AUDIO” Press the Arrow button ...
Page 25 - VIDEO CASSETTE; This unit will operate with any cassette that has the
- 25 - EN 1C29 VIDEO CASSETTE This unit will operate with any cassette that has the mark. For best results, we recom- mend the use of high-quality tapes. Do not use poor quality or damaged tapes. REMOVING A CASSETTE 1)In the Stop mode, press the STOP/EJECT button on the unit. The cassette will be ej...
Page 26 - PLAYBACK; Insert a prerecorded tape
- 26 - EN 1C29 PLAYBACK NORMAL PLAYBACK Make sure ... • The unit is turned on. 1 Insert a prerecorded tape If the erase-protection tab has been removed, the unitwill start playback automatically. 2 To begin playback Press the PLAY button. 3 To stop playback Press the STOP button when play-back is co...
Page 27 - SPECIAL PLAYBACK; TO CANCEL THE RENTAL MODE; RENTAL PLAYBACK; BLANK REPEAT; TO CANCEL THE REPEAT PLAY MODE; AUTO REPEAT PLAYBACK
- 27 - EN 1C29 SPECIAL PLAYBACK This function enables you to improve the picturequality when playing back worn cassettes such asrented tapes. 1 Select “USER’S SET UP” Press the SETUP button on theremote control.Press the Arrow button K or L to point to “USER’S SET UP”.Then press the ENTER button. 2 ...
Page 28 - SEARCH; WILL NOT; ZERO RETURN; In the example below:
- 28 - EN 1C29 SEARCH Make sure ... • The unit is turned on. • Insert a tape. This function allows you to search easily a beginningpoint that you want to review by rewinding or fastforwarding. NOTE: Zero Return WILL NOT work on a blank tape or a blank portion of a tape. 1 Stop a tape at your desired...
Page 29 - Select “INDEX SEARCH”; SPECIAL FEATURES; REAL TIME TAPE COUNTER
- 29 - EN 1C29 INDEX SEARCH This feature provides a method of indexing the start-ing point so that it can be easily returned to in eitherfast forward or rewind mode. • The index mark will be made automatically whenthe RECORD button is pressed. It will also bemarked at the starting point of Timer rec...
Page 30 - RECORDING; Select the channel to be recorded; NORMAL RECORDING
- 30 - EN 1C29 RECORDING Make sure ... • The unit is turned on. • Insert a cassette tape with its erase prevention tab in place. (If necessary, rewind or fast forward the tape tothe point at which you want to begin recording.) NOTES: • This unit will ONLY record and view the same channel. • This uni...
Page 31 - COPYING A VIDEO CASSETTE
- 31 - EN 1C29 OTR (One Touch Recording) Push(es) Display Recording length 1 push (normal recording) 2 pushes 0:30 30 minutes 3 pushes 1:00 60 minutes 17 pushes 8:00 480 minutes You can make copies of video tapes made by friendsor relatives for your enjoyment. You can not copy a DVD to a videotape. ...
Page 32 - TIMER; In the example below, the timer is being set to record:; AUTOMATIC TIMER; Select “TIMER PROGRAMMING”; For every day recording :
- 32 - EN 1C29 TIMER You may set the unit to start and end a recordingwhile you are away. You can set 8 programs to recordon specific days, daily or weekly within a 1 yearperiod. In the example below, the timer is being set to record: DATE: July 4th, 2004 SETTING TIME: from 7:30PM to 8:50PMCHANNEL: ...
Page 33 - TO CORRECT A PROGRAM; TIMER PROGRAM EXTENSION
- 33 - EN 1C29 To shift the time schedule of an automatic timerrecording.1)Press the POWER button.2)Repeat step [1] on page 32.3)Press the RECORD button and select the desired program using the Arrow button K or L . 4)Press the RECORD button again. Each additional push will shift forward thebegin/en...
Page 34 - TO CHECK THE BEGIN/END TIME; HINTS FOR AUTOMATIC; Select “USER’S SET UP”; SLEEP TIMER; Select “SLEEP TIMER”; TO CANCEL THE SLEEP TIMER
- 34 - EN 1C29 TO CHECK THE BEGIN/END TIME 1)Press the POWER button so that the Recording indicator turns off. 2)Press the SETUP button on the remote control.3)Confirm “TIMER PROGRAMMING” is pointed.4)Press the ENTER button. The details of programs appear on the TV screen. 5)Press the SETUP button o...
Page 35 - ON SCREEN DISPLAY; When the Closed Caption mode is OFF:; OFF mode; CABLE CHANNEL DESIGNATIONS
- 35 - EN 1C29 ON SCREEN DISPLAY To check the Counter, Clock and Channel number on the TV screen, press the DISPLAY button on the remotecontrol. Each time you press the DISPLAY button on the remote control, the TV screen will change as follows: When the Closed Caption mode is OFF: • Counter mode: Af...
Page 36 - DVD SECTION; ABOUT THE DISCS; DISC TYPES; The following discs can be played back on this unit.; The following discs cannot be played back on this unit.; DVD with region codes other than 1 or ALL; PLAYABLE DISCS; Title 1; Example; Group 1
– 36 – EN 01A11 DVD SECTION ABOUT THE DISCS DISC TYPES The following discs can be played back on this unit. ¡ DVD video ¡ DVD-R/RW* ¡ DVD+R/RW* ¡ Audio CD ¡ CD-R/RW* ¡ MP3* * Depending on the types or the writing method of the medium some discs can not be played. • Some DVD-R/RW, DVD+R/RW or CD-R/RW...
Page 37 - PLAYING A DISC; BASIC PLAYBACK; Getting started; CD; GENERAL FEATURES
– 37 – EN 01A11 PLAYING A DISC BASIC PLAYBACK Getting started ¡ Turn on the power of amplifier and any other com-ponents, if necessary. 1 Press the POWER button. ¡ The power will turn on. 2 Press the OPEN/CLOSE button to open discloading tray. 3 Place the chosen disc in the tray, with thelabel facin...
Page 38 - To continue playback, press the PLAY button.; SLOW REVERSE; Press and hold the SEARCH button
– 38 – EN 01A11 STEP BY STEP PLAYBACK 1 During playback, press the PAUSE button. ¡ Playback will pause and sound will be muted. 2 The disc goes forward by one frame eachtime the PAUSE button is pressed. 3 To exit step by step playback, press thePLAY button. DVD-V RESUME 1 During playback, press the ...
Page 39 - SEARCH FUNCTION; TRACK SEARCH; Using the Number buttons on the remote control; Press the SEARCH MODE button.; Using the SKIP; TITLE / CHAPTER SEARCH; MARKER SETUP SCREEN; Press the Arrow button (
– 39 – EN 01A11 SEARCH FUNCTION TRACK SEARCH There are three ways to begin playback on an AudioCD and MP3 at a specific track. Using the Number buttons on the remote control 1 Press the Number buttons to enter thedesired Track number. ¡ Playback will start at the selected track. ¡ For single digit t...
Page 40 - SPECIAL PLAYBACK FUNCTION; REPEAT; REPEAT TITLE / CHAPTER; PROGRAM; RANDOM PLAYBACK; In stop mode, press the MODE button twice.
– 40 – EN 01A11 SPECIAL PLAYBACK FUNCTION REPEAT REPEAT TITLE / CHAPTER To activate the repeat function press theREPEAT button during playback. ¡ The repeat mode changes as described below everytime you press the button. DVD-V REPEAT is available only during playback. CHAPTER TITLE OFF ( current cha...
Page 41 - PLAYING A MP3 DISC; to select the desired group or track.; MP3 PLAYBACK
– 41 – EN 01A11 PLAYING A MP3 DISC When a CD with MP3 files is in the unit, press theDISC MENU button to call up the MP3 menu on theTV screen. 1 In stop mode, press the Arrow button ( K / L ) to select the desired group or track. ¡ If a group is selected press theArrow B or ENTER button to go on to ...
Page 42 - CHANGING THE SETTINGS; The setting will be saved even if the unit is turned off.
– 42 – EN 01A11 CHANGING THE SETTINGS AUDIO LANGUAGE The unit allows you to select a language during DVDdisc (if multi languages are available) playback. 1 Press the AUDIO button during playback. 2 Press the AUDIO button repeatedly to selectyour desired language. NOTE: ¡ Pressing the AUDIO button ma...
Page 43 - Press the DISPLAY button again.; THE ON-SCREEN INFORMATION; For Audio CDs; For MP3; Press the DISPLAY button during playback.; will be displayed when repeat play has been
– 43 – EN 01A11 For DVD-Vs 1 Press the DISPLAY button during playbackto show current Chapter. ¡ The elapsed and remainingplaying time of the currentchapter will be displayed. 2 Press the DISPLAY button again to showcurrent Title. ¡ The elapsed and remaining playing time of the cur-rent title will be...
Page 44 - CHANGING THE DVD SETUP ITEMS; LANGUAGE SETTING; Language options are not available with some discs.; Press the Arrow button; CUSTOM mode will appear.; Sets the audio language.; TO CHANGE THE ON-SCREEN MENUS
– 44 – EN 01A11 CHANGING THE DVD SETUP ITEMS LANGUAGE SETTING Language options are not available with some discs. 1 Press the SETUP button twice in STOPmode so that the DVD SETUP menuappears. ¡ If the menu does not appear, press the PLAY buttonand the STOP button then the SETUP button twice. 2 Press...
Page 45 - AUDIO SETTINGS; When playing disc with copyright Protection; DISPLAY SETTING
– 45 – EN 01A11 AUDIO SETTINGS Choose the appropriate Audio settings for your equip-ment as it only affects during the playback of DVDdiscs. 1 Press the SETUP button twice in STOP modeso that the DVD SETUP menu appears. ¡ If the menu does not appear, press the PLAY button,the STOP button, then the S...
Page 46 - CONTROL LEVELS; All parental lock is cancelled.; Level 8; PARENTAL CONTROL; PARENTAL LEVEL; To change the password, press the Arrow button (; IF YOU FORGET THE PASSWORD; INITIALIZE; To cancel the initialization, select “NO”.
– 46 – EN 01A11 – 46 – CONTROL LEVELS ¡ ALL All parental lock is cancelled. ¡ Level 8 DVD software of any grade (adult/general/children)can be played back. ¡ Levels 7 to 2 Only DVD software intended for general use andchildren can be played back. ¡ Level 1 Only DVD software intended for children can...
Page 47 - TROUBLESHOOTING GUIDE; PROBLEM
– 47 – EN 01A11 Sometimes a performance problem can be easily solved by checking seemingly apparent but often overlookedpossibilities. Before arranging for service, check these items. It could save your time and money. TV/VCR Mode TROUBLESHOOTING GUIDE PROBLEM CORRECTIVE ACTION No picture and sound ...
Page 50 - DISC HANDLING; MAINTENANCE
– 50 – EN 01A11 EN 01A11 CABINET CLEANING • Wipe the front panel and other exterior surfaces ofthe unit with a soft cloth immersed in lukewarmwater and wrung dry. • Never use a solvent or alcohol. Do not spray insec-ticide liquid near the unit. Such chemicals maycause damage and discoloration to the...
Page 51 - Designs and specifications are subject to change without notice.; DVD; GENERAL SPECIFICATIONS; SPECIFICATIONS
– 51 – EN 01A11 CRT 19 inch in-line gun, 90˚ deflection tube Television system : NTSC-M Closed caption system :§15.119/FCCVideo Heads : Rotary four-head Tape width : 1/2 inch Tape speed SP : 33.40mm/sec. LP : 16.67mm/sec. SLP : 11.12mm/sec. Tuner channel TV VHF Low : #2~#6 TV VHF High : #7~#13 TV UH...
Page 52 - INDICE; CONTROLES DE; PANEL FRONTAL DEL UNIDAD; Consulte la figura 1 de la página 9; MANDO A DISTANCIA; Consulte la figura 2 de la página 9; VISTA POSTERIOR; Consulte la figura 3 de la página 10
– 52 – ES 0C28 INDICE ■ CONTROLES DE OPERACIÓN Y FUNCIONES . . . . . 52 PANEL FRONTAL DEL UNIDAD . . . . . . . . . . . . . . . . . 52MANDO A DISTANCIA . . . . . . . . . . . . . . . . . . . . . . . . . 52VISTA POSTERIOR . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52 ■ PREPARACIÓN PARA LA ...
Page 53 - CONEXIONES DE ANTENA/CABLE; Nota para el instalador de sistemas CATV; CONEXIÓN A TOMAS DE ENTRADA; Consulte la figura 5 de la página 12
– 53 – ES 0C28 29. Botón TITLE Para visualizar el menú de títulos. 30. Botón CLEAR Para cancelar ajustes. 31. Botón MODE Activa el modo de reproducción programada o el modode reproducción aleatoria. 32. Botón SEARCH MODE Presione este botón para localizar un punto deseado. 33. Botón AUDIO Presione e...
Page 54 - ) Abra la cubierta del compartimiento de las pilas; Consulte la figura 6 de la página 13; Enchufe el cordón de alimentación del unidad; Pulse el botón POWER para encender el unidad.; Seleccione “LANGUAGE”; para señalar “LANGUAGE”.; Seleccione “ENGLISH”, “ESPAÑOL” o
PREPARACIÓN PARA LA UTILIZACIÓN MODO DE ENTRADA EXTERNA Al usar una señal de entrada externa (otra videograba-dora o una videocámara), conecte los cables de salidade audio/vídeo del equipo externo a las tomasAUDIO L/R IN/ VIDEO IN de su unidad, luego pre-sione los botón CHANNEL K o L hasta que apare...
Page 55 - REPRODUCCIÓN BÁSICA; Para empezar; Presione el botón POWER.; En el ejemplo de abajo, el reloj va a ajustarse así:; AJUSTE DEL RELOJ; Seleccione “AJUSTE DE CANAL”
ES 0C28 SECCIÓN DE DVD REPRODUCCIÓN BÁSICA Para empezar ¡ Conecte la alimentación del amplificador y otroscomponentes, si es necesario. 1 Presione el botón POWER. ¡ La alimentación se conectará. 2 Presione el botón OPEN/CLOSE para abrirla bandeja de carga del disco. 3 Ponga el disco deseado en la ba...
Page 56 - Printed in Malaysia; LIMITED WARRANTY; LIMITS AND EXCLUSIONS:; PLEASE DO NOT SHIP YOUR UNIT TO THE TETERBORO ADDRESS.
Printed in Malaysia 1EMN20183 T0052UC ★★★★★ LIMITED WARRANTY FUNAI CORP. will repair this product, free of charge in the USA in the event of defect in materials or workman- ship as follows: DURATION: PARTS: FUNAI CORP. will provide parts to replace defective parts without charge for one (1) year fro...
