Emerson DA-100- Manual
Emerson DA-100– Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – SAFTEY PRECAUSTIONS; WARNING
- Page 3 – General Safety
- Page 4 – SPECIFICATION; Cylinder Air Pressure:; INSTALLATION
- Page 5 – CLEANING; type hose; Wipe exterior of gun with a solvent dampened cloth.; CAUTION; REPLACEMENT; Tools Required
- Page 7 – SERVICE CHECK; Normal Spray Pattern; Note; ACCESSORIES
SB-E-DA-100-A
DA-100
LVMP
AUTOMATIC SPRAY GUN
OPERATION MANUAL
IMPORTANT:
Read and follow all instructions and SAFETY PRECAUTIONS before using this
equipment.
DESCRIPTION
DA-100 LVMP gun is developed to achieve high transfer efficiency and it can be obtained as well as
high atomization with less air consumption. LVMP stands for Low Volume Medium Pressure.
Small, lightweight LVMP gun is suitable for installing to automatic or semi-automatic machines.
Models and application information follows.
MODELS
Example: DA - 100 -
−
1
−
20
□−□□□
Basic Part No. Fluid Tip Size 0.8, 1.1, 1.4, 1.8 mm
Air Cap No. 205, 207
NOTE: The gun body and fluid passage is made of Aluminum. Please do not use the gun with
chlorinated solvents or waterborne paint.
Chart 1
Air Cap
Marking Part
No.
Fluid Tip Size
(mm)
Pattern Size
Shape
Typical Applications
205
JJ-3-205
0.8, 1.1, 1.4, 1.8
250mm
Straight
Most conventional materials
207
JJ-3-207
0.8, 1.1, 1.4, 1.8
300mm
Straight
Most conventional materials
Chart 2
Air Cap
Tip Marking (mm)
Part Number
(Tip & Needle Lapped Set)
0.8 DA-400-0.8
1.1 DA-400-1.1
1.4 DA-400-1.4
205, 207
1.8 DA-400-1.8
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Other Manuals for Emerson DA-100
Summary
SAFTEY PRECAUSTIONS This manual contains important information that ALL users should know and understand BEFORE using this equipment. This information relates to USER SAFETY and PREVENTING EQUIPMENT PROBLEMS. To help you recognize this information, we use the following terms to draw your attention t...
HAZARD CAUSE SAFEGUARDS General Safety Improper operation or maintenance may create a hazard. Operators should be given adequate training in the safe use and maintenance of the equipment (in accordance with the requirements of NFPA-33, Chapter 15 in U.S.). Users must comply with all local and nation...
SPECIFICATION Max. Air Pressure: 0.69MPa (6.9 bar) Max. Fluid Pressure: 0.69MPa (6.9 bar) Cylinder Air Pressure: Min. 0.35MPa (3.5 bar) Max. 0.50MPa (5.0 bar) Weight: 480g Gun Stud Diameter: 16.0mm Fluid Thread: G1/4 (M) CAP Thread: G1/4 (M) CYL Thread: G1/4 (M) INSTALLATION Figure 1. Dimensions Mou...
