Emerson Bristol ControlWave LP- User Manual
Emerson Bristol ControlWave LP– User Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – Product Data Document; Bristol; Remote Automation Solutions; Low Power Mode; of fixed and expansion I/O subsystems. The board; Specifications; CPU; flash or battery backed SRAM; Communication
- Page 3 – ControlWave LP Discrete Input Module; Input Configuration: Contact Closure, internally; ControlWave LP Discrete Output Module; isolated common When a field supply common; ControlWave LP High Speed Counter Module; basis with jumper configurtion.
- Page 4 – VDC MOV across input and to Field Common; ControlWave LP Analog Output Module; Number of Points: 4; Environmental Specifications; Physical Size: Mounting Plate is 12.5 inches
- Page 5 – Open Standards For Programming, Network; and bring you the optimal process efficiency and
- Page 6 – Simply Creative; OpenBSI Utilities; NetView; NetView - Network configuration
- Page 7 – Configuration Wizard simplifies Network setup; Local Configuration Wizard; DataView for Real-time data display; DataView; TechTools – OPC Server & ActiveX; WebBSI
- Page 8 – Software Required; High Historical Data Integrity; Generic Web; Data Server; Control
- Page 9 – ControlWave Open Network Connectivity
- Page 10 – Communication Protocols; Generic Serial Protocol
- Page 11 – The Secure Data Advantage
Product Data Document
420DS-4c
July 19, 2007 - Page 1
Bristol
®
ControlWave
®
LP
Website: www.EmersonProcess.com/Remote
Remote Automation Solutions
Low Power High Performance Process
Automation Controller
Bristol® ControlWave® LP, from Emerson Process
Management, is a low power high performance pro-
cess automation controller that performs complex
control strategies, collects, time stamps, and stores
data, and communicates in local, remote, and wide
area networks. ControlWave LP offers the features
of an RTU and an automation controller with DCS
functionality.
Designed for control and data acquisition ap-
plications, the ControlWave LP is easily installed
in"remote areas and offers one of the industries
widest operating temperature ranges. Additionally,
due to its small form factor and rugged industrial
design, ControlWave LP offers an outstanding ability
to match the requirements of the most demanding
process plant and remote SCADA system environ-
ments. Above all, Emerson has developed this inno-
vative controller to provide cost-effective solutions
by minimizing the time required for installation and
configuration.
The ControlWave LP complements the ControlWave
and Network 3000 family of process automation
controllers and RTU’s. The ControlWave LP is
compact in size and offers the full programmabil-
ity of ControlWave Designer IEC 61131 compliant
software, and communicates via standard BSAP, as
well as other industry standard protocols.
The ControlWave LP is available in an open chassis
assembly for mounting to a panel or within an enclo-
sure. The unit is a three-board assembly consisting
of a CPU board, a Multifunction Input/Output board,
and a Power Supply/Sequencer board. All field
I/O connections to the ControlWave LP are readily
available via quick disconnect terminals located on
the sides of the chassis.
Hardware Features
Ultra Low Power 486 based processor provides
high performance with low power consumption.
Five asynchronous serial communication ports
Fixed I/O with optional expansion I/O
Field device power supply built in
Small size
Wide temperature range (-40ºC to +70ºC)
Class I, Div. 2 hazardous location and
CE approval
Low Power Performance
The ControlWave LP uses the Ultra Low Power
(ULP) Intel 486SX processor. The CPU is oper-
ated at 3.3 V to reduce power consumption. The
unit automatically goes into a low power, quiet
mode, during CPU idle time. These features make
ControlWave LP the logical choice for low power ap-
plications using solar panels and battery backup.
•
•
•
•
•
•
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
Product Data Document 420DS-4c July 19, 2007 - Page 2 Bristol ® ControlWave ® LP Remote Automation Solutions Website: www.EmersonProcess.com/Remote Fused with power-on switch.Master Clear and Power Fail IndicationPower sequencer for auto power recoveryPower supply isolation: 500 VDC Surge Suppressio...
Product Data Document 420DS-4c July 19, 2007 - Page 3 Bristol ® ControlWave ® LP Remote Automation Solutions Website: www.EmersonProcess.com/Remote Fixed I/O Subsystem ControlWave LP Discrete Input Module Number of Points: 16 FixedInput Voltage Range: 12V or 24VInput Filtering: 1 millisecond or 30 m...
Product Data Document 420DS-4c July 19, 2007 - Page 4 Bristol ® ControlWave ® LP Remote Automation Solutions Website: www.EmersonProcess.com/Remote ‘1’ State Voltage: 90 % of input voltage range‘0’ State Voltage: 10 % of input voltage rangeBus Access: 16-bits wideMax Accumulator Value: 65536Electric...
