Emerson 67D- User Manual
Emerson 67D– User Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – Specifications; Available Configurations; Stainless Steel Bolting:
- Page 3 – Type XXXX; Product Descriptions; Principle of Operation; Smart BleedTM Airset
- Page 4 – Installation; WARNING; the limits given in the Specifications
- Page 5 – Shutdown; If sufficient clearance exists, the body
- Page 6 – disassembly without first isolating the; Trim Maintenance
- Page 7 – Diaphragm Maintenance; Parts Ordering
67D Series
D103151X012
Instruction Manual
Form 5858
December 2013
www.fisherregulators.com
67D Series Pressure Reducing Regulators
TyPE 67DF OR 67DFR FILTERED REGULATOR
TyPE 67D OR 67DR REGULATOR
Figure 1.
67D Series Pressure Reducing Regulators
WARNING
!
Failure to follow these instructions or to
properly install and maintain this
equipment could result in an explosion,
fi re and/or chemical contamination
causing property damage and personal
injury or death.
Fisher
®
regulators must be
installed, operated and maintained
in accordance with federal, state and
local codes, rules and regulations and
Emerson Process Management Regulator
Technologies, Inc. instructions.
If the regulator vents gas or a leak
develops in the system, service to
the unit may be required. Failure to
correct trouble could result in a
hazardous condition.
Introduction
Scope of the Manual
This manual provides instructions for the installation,
maintenance and parts ordering information for
67D Series regulators. Instructions and parts lists for
other equipment mentioned in this instruction manual,
as well as for other 67 Series regulators, are found in
separate manuals.
P1183
P1182
Installation, operation and maintenance
procedures performed by unqualifi ed
personnel may result in improper
adjustment and unsafe operation. Either
condition may result in equipment
damage or personal injury. Use qualifi ed
personnel when installing, operating
and maintaining the 67D Series Pressure
Reducing Regulators.
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
67D Series 2 Specifications This section lists the specifications for the 67D Series regulators. Factory specification such as type, maximum inlet pressure and outlet pressure are stamped on the nameplate fastened on the regulator at the factory. Available Configurations Type 67D: Direct-operated re...
67D Series 3 Type XXXX MXXXX Month Year Type XXXX INLET PRESSURE OUTLET PRESSURE ATMOSPHERIC PRESSURE INTERMEDIATE PRESSURE PILOT SUPPLY PRESSURE LOADING PRESSURE Figure 2. 67D Series Operational Schematics INLET PRESSUREOUTLET PRESSUREATMOSPhERIC PRESSURE M1153 M1154 TyPE 67DR OR 67DSR TyPE 67D OR ...
67D Series 4 A regulator may vent some gas to the atmosphere. In hazardous or flammable gas service, vented gas may accumulate and cause personal injury, death or property damage due to fire or explosion. Vent a regulator in hazardous gas service to a remote, safe location away from air intakes or a...
