Elexnux GDWMDO02 - User Manual

The water pipe comes with a gasket, and a second
gasket needs to be installed. Both ends of the water
pipe need to be tightened to ensure that the gasket
is supported to avoid water leakage

The foam pad and bottom bracket are used to protect
the motor during transportation. Please be sure to
remove it when using the washing machine. If you
don?t remove it, it will cause loud noise or the
washing machine will not work directly

QUESTION

ANSWER

QUESTION

ANSWER

The washing machine is leaking?

Broken bottom guard?

The residual water in the washing machine is from the
production test process, not the old machine, which
proves that the purchased washing machine is a

qualified product after water testing! It is not a

secondary sale or quality problem

QUESTION

ANSWER

Why is there water in the
washing machine?

QUESTION

ANSWER

Anti-rat plate is in the plastic bubble at the bottom
or top of the packing box. Please do not throw away
the plastic bubble and the packing carton together.
Anti-rat plate only needs to be fastened to the box
without screws.Some models of the new version have
canceled the anti-rat plate. At this stage, there may

be confusion due to different batches, but other
functions are the same and will not affect the normal

use of the product.

Why can't I find the rat-proof

board for the washing machine?

QUESTION

ANSWER

There is sealed salt water on the balance ring of the
washing machine, which acts as a balance

The sound of water when the
washing machine drum shakes?

QUESTION

ANSWER

The inner diameter of the overall drainage pipe is
30.5mm/1.2inch; the inner diameter of the external
drainage pipe is 28.5mm/1.1inch

Drain pipe diameter?

QUESTION

ANSWER

1.Check whether the drain pipe is put down

2.There is a buffer of drainage time, and dehydration

starts after the water is emptied

According to the dehydration
program, there is no dehydration?

QUESTION

ANSWER

Whether the adjustable feet are adjusted tightly
the clothes are skewed during spinning, please
re-level the washing machine

Why does water go back
when dehydrated?

QUESTION

ANSWER

It needs to reach the set water level to wash. You
can lower the water level and add water to the
balance ring

Washing machine not washing
after manually adding water?

QUESTION

ANSWER

Maybe the fuse is blown

Not working?

QUESTION

ANSWER

Length 0.8m/31inch
interface 20mm/0.8inch

The length and type
of the water inlet pipe?

QUESTION

ANSWER

Loosen the 4 screws on either side of the base
connection, snap the box in, and tighten the screws

The front cabinet and base
come out?

QUESTION

ANSWER

Check the outlet for power, check the fuse

No electricity?

QUESTION

ANSWER

Stainless steel screw M6x27

Type of fixed pulsator screw

QUESTION

ANSWER

Replace the water pipe

Internal water pipe leaking?

QUESTION

ANSWER

Replace the water inlet valve

Broken water inlet valve?

QUESTION

ANSWER

Yes, it can be used with a voltage adapter

Can I use the machine
with a voltage adapter?

Laundry

Program

Commonly

Used

Quick Wash

Blanket

Soak Wash

Single Wash

Drum Dry

Water

Recycling

Barrel self

Cleaning

Single

Dehydration

Washing 6-soaking 6-washing 3-soaking 7-washing 3

dehydration 7

Spin mode for 30 Minutes

Same as “01 Commonly Used"

01

02

03

04

05

06

07

08

09

10

47

17

17

11

11

8

17

11

11

11

11

11

20

17

17

18

17

11

8

8

8

8

7

10

-

-

-

-

-

-

-

-

-

6

47

-

-

--

23

67

65

17

8

32

30

47

Washing

Time

Gentle

（minute）

Soak

Washing

Dehydration

Rinsing1

Rinsing2

The water pipe comes with a gasket, and a second

gasket needs to be installed. Both ends of the water

pipe need to be tightened to ensure that the gasket is

supported to avoid water leakage

THANK YOU FOR PURCHASING OUR PRODUCTS

[email protected]

If you encounter problems
contact the after-sales mailbox

Malfunction

(Nixie tube display)

“E1”
Abnormal water ingress

“E2"
Abnormal drainage

“E3"
abnormal when opening
the cover

“E4"
abnormal dehydration

“E5"
water recovery

“E6"
abnormal water level

“E7"
child protection

·Water for more than 20 minutes
·Faulty water inlet valve
·Whether the faucet is turned on

·Drain for more than 5 minutes
·Whether the drain pipe is put down
·Whether the drain pipe is blocked

Open the lid when dehydrating

·Whether the clothes are placed
sideways
·Whether the washing machine is
tilted

About to drain, put the drain hose in
the water tank to collect the water.

·Water level sensor failure
·Poor contact of wiring harness plug
·Water leakage when stirring
·Airway loose

Open the cover when child lock

Close the cover

Put the drain pipe into the water tank then
open or close the upper cover or press the
“Start/Pause" button to drain water.

When it detects that the water level is
normal, it will automatically resume normal
operation

·Rearrange clothes and close the cover
·Place the washing machine horizontally
open and close the cover once

Close the cover

· Check the retractor, open and close the
cover once
· Put down the drain pipe and open and
close the cover once
· Remove foreign matter, open and close
the cover once

·Find out the cause of low water pressure
open and close the machine cover once

·Clean the water inlet valve filter, open and

close the cover once
·Turn on the faucet, open and close the
cover once

Cause Of Issue

Method Of Exclusion